HP ZX2000 Manuale utente
Quick Installation Guide
HP Remote 3D Graphics Software
Quick Installation Guide
HP Remote 3D Graphics Software
Document Part Number: 5969-3194
January 2004
Installation Guide www.hp.com 1
This document provides a quick overview of installing both the
Receiver and Sender components of the HP Remote 3D Graphics
Software on your hp workstation. For detailed instructions,
please refer to the online documentation that is located on the
enclosed CD at /cdrom/pdf/R3DusersManual.pdf or
/cdrom/html/index.html for web based help.
Installing the HP Remote 3D
Receiver
Installation of the HP Remote 3D Receiver is required on all
systems that will be connecting to an HP Remote 3D Sender.
Microsoft® Windows®
This procedure must be executed from an account that has
administrator priviledges.
To install the HP Remote 3D Receiver on Microsoft Windows:
1. Insert the HP Remote 3D Graphics Software CD.
2. Select: R3D_receiver_win_ia32_1.0.exe
3. Follow the directions on the screen.
2 www.hp.com Installation Guide
HP-UX
This procedure must be executed from an account with root
priviledges.
To install the HP Remote 3D Receiver on HP-UX:
1. Insert and mount the HP Remote 3D Graphics Software CD.
2. Depending on the processor architecture execute:
a. For HP-UX PA-RISC execute:
R3D_receiver_hpux_pa_1.0
b. For HP-UX Itanium2 execute:
R3D_receiver_hpux_ipf_1.0
3. Follow the directions on the screen
Linux
This procedure must be executed from an account with root
priviledges.
To install the HP Remote 3D Receiver on Linux:
1. Insert and mount the HP Remote 3D Graphics Software CD.
2. Execute: R3D_receiver_linux_ia32_1.0
3. Follow the directions on the screen.
Installation Guide www.hp.com 3
Installing the HP Remote 3D
Sender
Installation of the HP Remote 3D Sender is required on all
systems that may be connected to by an HP Remote 3D Receiver.
Microsoft Windows
Consult the on-line documentation to see how to install an open
source VNC server that the HP Remote 3D Receivers can
connect to.
HP-UX
This procedure must be executed from an account with root
priviledges and will require a system reboot.
Before installing the HP Remote 3D Sender, the system must
have the required pre-requisite X Server patches installed. If you
do not have the following patches installed, they are available
from www.hp.com/go/bizsupport.
■HP-UX 11.0 OS PHSS_26637 - X Server
PHSS_22627 thru 638 - 3D libraries
4 www.hp.com Installation Guide
■HP-UX 11.11 PHSS_26638 - X Server
PHSS_22627-638 - 3D libraries
■HP-UX 11.22 PHSS_26625 - X Server
PHSS_22627-638 - 3D libraries
Once the patches (or newer versions) are installed, install the HP
Remote 3D Sender on HP-UX as follows:
1. Insert and mount the HP Remote 3D Graphics Software CD.
2. Execute: R3D_sender_hpux_pa_1.0
3. Follow the directions on the screen.
Linux
This procedure must be executed from an account with root
priviledges and will require a system reboot.
To install the HP Remote 3D sender on Linux:
NOTE: HP Remote 3D and HP VISUALIZE
CONFERENCE are incompatible—they cannot both
be installed on an HP Remote 3D Sender. The solution
is to un-install HP VISUALIZE CONFERENCE..
Installation Guide www.hp.com 5
1. Insert and mount the HP Remote 3D Graphics Software CD,
2. Depending on the processor architecure execute:
a. For Linux IA-32 execute:
R3D_sender_linux_ia32_1.0
b. For Linux Itanium2 execute:
R3D_sender_ipf_ia32_1.0
3. Follow the directions on the screen.
4. Configure the XF86Config file as follows:
a. Edit the file /etc/X11/XF86Config-4 (for a system with
an Nvidia Quadro 4 graphics card).
b. Locate the Section "Module" string.
c. Add " Load "hwvnc" " to this section.
Create an HP Remote 3D Sender
Password
After the installation of the HP Remote 3D Sender, a system
wide password must be set to allow the HP Remote 3D Receivers
to connect to the Sender.
6 www.hp.com Installation Guide
To create a password:
1. Login as root.
2. Change directory to: /opt/Remote3D/bin
3. Run the R3Dpasswd program.
4. Enter your password.
5. Your HP Remote 3D Sender is now setup and running.
Technical Support
HP provides technical support for software up to 90 days from
date of purchase. The HP Remote 3D software is supported only
on the hp workstation.
To contact technical support, you may call 1-800-HPINVENT in
the USA and Canada. For all other countries, please visit
www.hp.com and select "Contact HP" for a listing of technical
support phone numbers for your country or region.
For online access to general technical support information and
tools, go to www.hp.com/go/bizsupport. Support resources
include web-based troubleshooting tools, technical knowledge
databases, driver and patch downloads, online communities, and
proactive notification services.
Installation Guide www.hp.com 7
s
Altri manuali per ZX2000
12
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali HP Scrivania
HP
HP Kayak XU 03xx Manuale utente
HP
HP Workstation Z800 Manuale utente
HP
HP dx2100 - Microtower PC Manuale utente
HP
HP Pavilion 400 - Desktop PC Istruzioni per l'installazione
HP
HP Z210 Series Guida di riferimento
HP
HP EliteDesk 880 G5 Manuale
HP
HP Pavilion Elite m9165 Manuale utente
HP
HP Pavilion w5100 Manuale utente
HP
HP Vectra VL6 8 Manuale utente
HP
HP i2000 Manuale
HP
HP Pro All-in-One MS216br Come usare
HP
HP Rp3000 - Point of Sale System Manuale utente
HP
HP EliteDesk 800 G2 Desktop Mini Istruzioni per l'installazione
HP
HP ProLiant WS460c Gen8 Manuale utente
HP
HP Compaq Presario Manuale utente
HP
HP Compaq Presario Scheda tecnica
HP
HP Xw4300 - Workstation - 2 GB RAM Manuale utente
HP
HP Brio 8300 Manuale utente
HP
HP Xw6600 - Workstation - 2 GB RAM Istruzioni utente
HP
HP Compaq dc5800 Manuale operativo e di manutenzione
