HP ISCSI Manuale utente

HP Accelerated iSCSI for Multifunction

Network Adapters

User Guide

Part Number 410538-00J

December 2007 (Ninth Edition)

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP

shall not be liable for technical or editorial errors or omissions contained herein.

Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212,

Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S.

Government under vendor’s standard commercial license.

Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. Windows Server 2003 is a trademark of Microsoft

Corporation.

Audience assumptions

This document is for the person who installs, administers, and troubleshoots servers and storage systems.

HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards

in products with hazardous energy levels.

Contents 3

Contents

Overview..................................................................................................................................... 4

iSCSI protocol........................................................................................................................................... 4

HP Accelerated iSCSI capability.................................................................................................................. 4

iSCSI supported operating systems .............................................................................................................. 4

Supported iSCSI targets ............................................................................................................................. 4

Download latest drivers, firmware, and documentation .................................................................................. 5

Configuring an iSCSI device .......................................................................................................... 6

iSCSI configuration through the NCU........................................................................................................... 6

Install the Network Configuration Utility software................................................................................. 6

iSCSI Settings tab...................................................................................................................................... 6

iSCSI Devices tab...................................................................................................................................... 9

iSCSI VLAN tab ........................................................................................................................................ 9

iSCSI Information tab............................................................................................................................... 11

iSCSI Statistics tab................................................................................................................................... 13

iSCSI Diagnostics tab............................................................................................................................... 13

Acronyms and abbreviations........................................................................................................ 14

Index......................................................................................................................................... 15

Overview 4

Overview

iSCSI protocol

The HP iSCSI protocol transports block-level storage requests over TCP connections. Using the iSCSI

protocol, systems can connect to remote storage and use it as a physical disk although the remote storage

provider or target may actually be providing virtual physical disks. HP Accelerated iSCSI supports all

targets that are certified and supported by Microsoft iSCSI Software Initiator.

HP Multifunction Server Adapters can be enabled as iSCSI devices or virtual iSCSI host bus adapters

(HBAs). iSCSI HBAs provide the capability to run iSCSI protocol over offloaded TCP connections. By

offloading the TCP connection processing to an HP Multifunction Server Adapter, CPU utilization is

reduced allowing additional processing capacity for applications.

HP Accelerated iSCSI capability

The HP Accelerated iSCSI capability is available as a standard feature with standup and mezzanine HP

Multifunction Server Adapters and HP Multifunction Server Adapters for HP BladeSystem servers. It is

available as a licensable option, through the purchase of an HP ProLiant Accelerated iSCSI license, for

embedded HP Multifunction Server Adapters.

iSCSI supported operating systems

iSCSI capabilities are available on the following operating systems:

•Windows Server 2008

•Windows Server 2008 x64

•Windows Server 2003

•Windows Server 2003 x64

To enable iSCSI on adapters running Windows Server 2003 and Windows Server 2003 x64 systems,

the Microsoft® iSCSI Software Initiator version 2.0 or later software must be installed. This software is

required to configure the iSCSI protocol, including discovery portals, iSCSI targets, authentication, and so

on.

To enable iSCSI on adapters running on Windows Server 2003 (SP1) and Windows Server 2003 x64

(SP1), an updated Storport storage driver from article number KB932755 must be downloaded from the

Microsoft (http://www.microsoft.com) website.

Supported iSCSI targets

HP Accelerated iSCSI supports all targets that are certified and supported by Microsoft iSCSI Software

Initiator.

Overview 5

Download latest drivers, firmware, and

documentation

HP updates networking software frequently to include new functionality and features. For the latest driver,

firmware, and documentation updates go to the HP website

(http://h18004.www1.hp.com/products/servers/networking/index.html).

Configuring an iSCSI device 6

Configuring an iSCSI device

iSCSI configuration through the NCU

Complete the steps in the following sections to enable and configure an iSCSI device or to view iSCSI

information through the NCU.

Install the Network Configuration Utility software

If you do not have HP NCU software installed on your server, complete the following steps to install the

NCU for Windows operating systems:

1. Go to the HP website (http://www.hp.com).

2. Click Software & Driver Downloads from the left menu bar.

3. Type the product name in the For product box and press Enter. For example, type NC373T.

4. Select an operating system.

5. Click HP Network Configuration Utility.

6. Click download and save the HP SoftPaq (sp#####.exe) file to a directory on your hard drive. The

SoftPaq file is a self-extracting executable with a file name based on the SoftPaq number.

7. Click the SoftPaq file to extract the files and then open the cmponent.htm file.

iSCSI Settings tab

To enable iSCSI:

1. Select an HP Multifunction Adapter in the NCU Main window and click Properties to display the

Multifunction Adapter Properties Settings tab. Alternatively, hold down the Alt key and enter p to

display the Settings tab.

Configuring an iSCSI device 7

2. Select Enable iSCSI Device to enable iSCSI on the multifunction adapter. iSCSI cannot be enabled on

the device if the adapter is in an Automatic, 802.3ad Dynamic with Fault Tolerance, or Switch-

Assisted Load Balancing with Fault Tolerance (SLB) team.

3. (Optional steps). Type a user-defined MAC address for the iSCSI device in the Locally Administered

Address box. The default MAC address is used if an address is not entered.

Configuring an iSCSI device 8

4. Click iSCSI IP Settings. The iSCSI IP Settings window appears so that you can specify how the IP

Address is obtained.

5. On the iSCSI IP Settings window, select one of the following:

a. Obtain an IP Address automatically. This is the default. If this option is selected, DHCP is used to

acquire an IP configuration for the iSCSI device.

b. Use the following IP address. This option allows you to specify the IP configuration for the iSCSI

device. The IP address MUST be different from IP addresses that are assigned to other iSCSI

devices and Ethernet adapters.

—IP Address. Enter the IPv4 address (dotted decimal).

—Subnet Mask. Enter the network subnet mask (dotted decimal).

—Default Gateway. Enter the default route.

6. Click OK to save all changes and return to the Multifunction Adapter Properties Settings tab.

After a Multifunction Server Adapter is enabled as an iSCSI device, it becomes a virtual iSCSI HBA. These

devices are displayed on the iSCSI Devices tab on the NCU Main window.

Configuring an iSCSI device 9

iSCSI Devices tab

The iSCSI Devices tab lists all HP ProLiant Gigabit Ethernet Multifunction server adapters that are iSCSI

enabled. A sample iSCSI Devices tab for Windows Server 2003 is shown below.

If you upgrade the Network Configuration Utility (NCU) to version 8.20 or later, the following team types

are converted to the Transmit Load Balancing (TLB) team type if they include an iSCSI-enabled adapter.

•Automatic

•802.3ad Dynamic with Fault Tolerance

•Switch-assisted Load Balancing with Fault Tolerance (SLB)

iSCSI VLAN tab

To create an iSCSI VLAN device for an iSCSI-enabled adapter:

Configuring an iSCSI device 10

1. Select an HP Multifunction Adapter in the NCU Main window or the iSCSI Devices tab and click

VLAN (802.1Q) to display the VLAN tab. Alternatively, hold down the Alt key and enter v to display

the VLAN tab.

The iSCSI VLAN/QOS (802.1p/Q) window displays the following information:

oiSCSI VLAN Id.Shows the identifier value used for the iSCSI VLAN device.

oiSCSI VLAN Name. Shows the descriptive name for the VLAN ID.

Indice

Altri manuali HP Hardware di rete

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Come usare

HP procurve radio port 220 Istruzioni per il montaggio

HP 82713A Manuale utente

HP AJ878A - StorageWorks 320 GB Hard Drive Manuale utente

HP HP 16500 Istruzioni di installazione e manutenzione

HP procurve radio port 220 Manuale utente

HP Enterprise Aruba 7210 Istruzioni per il montaggio

HP 400338-001 - KVM Switch Manuale utente

HP Presario X1000 - Notebook PC Istruzioni utente

HP StoreOnce 4700 Manuale di installazione e d'uso

HP ProCurve Networking J8451A Manuale utente

HP 85027A Manuale di servizio

HP VMA Series Foglio di istruzioni

HP StorageWorks 2324fc Manuale utente

HP 12500 Series Manuale utente

HP Surestore Disk Array 12h - And FC60 Manuale utente

HP ProCurve 1600M Manuale utente

HP SL500 (M852x) Manuale utente

HP X5000 G2 Manuale di servizio

HP Bc1500 - BladeSystem - Blade PC Manuale

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard... Manuale utente

HP A3550A - High Availability Disk Arrays Model 20 Storage... Manuale utente

HP ProCurve Secure Router 7203dl J8753A J8753A Manuale utente

HP E8491B IEEE 1394 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente

HP iSCSI Manuale utente

Manuali Hardware di rete popolari di altre marche