HP Designjet 8000s Series Manuale utente

tiksgnuthcirro

wfu

hcu

hsno

lla

tsn

rue

ne'

uco

talla

i'd ediu

nois

led

alla

tsn

ela

una

r ed

oll

dor led

nói

íu

ed anib

b ad

ocer

ats

ni e

ςοτ

µγ

λυΤ ύ

ιλυ

ραΚ τιΚ

ςησατσάτ

κγΕ

ηδ

ykví

ejívan

adaS

icalat

p akčur

řP

elzsék

ósroől

izé

isé

tí

ele

jezcr

ilupzs watseZ

użatnom ajckurt

йонм

еи

рп ткелпмоК

ретнир

ялд

нибоб

екво

ат

оп о

тсдо

уР

sara

aM amra

kı

uvalıK muluruK

VOC

NORF m

m84

VOC

HP Designjet 8000s Take-Up Reel Kit Installation Guide

iK l

eR pU-ekaT s0

08 te

ngiseD PH

uG noitallatsnI

.P.L ,ynapmoC tnempoleveD drakcaP-ttelw

H 60

moc.ph.ww

Printed in Japan

HP Designjet 8000s Take-Up Reel Kit

Installation Guide

Legal notices

The information contained in this document

is subject to change without notice.

Hewlett-Packard makes no warranty of any

kind with regard to this material, including,

but not limited to, the implied warranties of

merchantability and fitness for a particular

purpose.

Hewlett-Packard shall not be liable for errors

contained herein or for incidental or

consequential damages in connection with

the furnishing, performance, or use of this

material.

No part of this document may be photocopied

or translated to another language without the

prior written consent of Hewlett-Packard

Company.

Installing the take-up reel

This Installation Guide contains information necessary to install and set up the HP Designjet 8000s Take-

up Reel Kit (Model Q6681A). For information about using the take-up reel, refer to the HP Designjet 8000s

Printer User's Guide.

Two people will be required to install the take-up reel. Make sure there is enough space to access the front

and the rear of the printer. All mechanical installation takes place from the front of the printer and electrical

connections are made at the rear.

The tool you need to install the take-up reel is included in the box, and consists of a cross-head (Phillips)

screwdriver.

To install the take-up reel:

1. Open the box and remove all parts.

1. Left end plate. 4. Take-up reel assembly.

2. Right end plate. 5. Motor cable.

3. Media sensor assembly. 6. Tension bar.

ENWW 1

Installing the take-up reel

2. Install the right end plate as follows:

a. Insert the lip (1) on the right end plate into the slot (2) on the right leg on the printer stand.

b. Install three screws (1) to fix the right end plate to the right printer leg stand.

3. Install the left end plate as follows:

a. Insert the lip on the left end plate into the slot on the left leg on the printer stand.

b. Install three washers (1) and screws (2) to fix the left end plate to the left printer leg stand.

NOTE The left end plate allows for vertical movement so that the take-up reel height

can be adjusted even with the screws fully inserted.

2 Installing the take-up reel ENWW

Installing the take-up reel

4. Install the take-up reel assembly as follows:

a. Place the take-up reel assembly (3) onto the printer stand crossbar.

b. Rest the ends of the support bar (2) on the ledges (1) on each end plate.

5. Install the holding bracket (1) at each end to secure the support bar as follows:

ENWW 3

Installing the take-up reel

a. Install the bottom of the holding bracket into the slot (2) on the end plate.

b. Install one screw (1) into each holding bracket to secure it to the end plate.

6. Turn the take-up reel stop screws (1) anti-clockwise to release the right and left assemblies.

4 Installing the take-up reel ENWW

Installing the take-up reel

7. Slide the left (1) and right (2) take-up reel assemblies to the right and left ends of the support bar.

Remove the assembly packaging (3).

8. Turn the take-up reel stop screws (1) clockwise to lock the right and left take-up reel assemblies.

9. Install one screw (2) to secure the take-up reel media sensor assembly (1) to the right stand.

ENWW 5

Installing the take-up reel

10. At the rear of the printer, insert the following connectors into the rear of the right take-up reel assembly

and secure them with the cable clip (3):

a. Insert the media sensor connector (1).

b. Insert the take-up reel motor cable connector (2).

11. Insert the connector on the other end of the motor cable (1) into the rear of the printer.

12. Secure the motor cable with the three cable clips (1) on the rear of the printer.

6 Installing the take-up reel ENWW

Installing the take-up reel

13. Load the tension bar (1) into the take-up reel.

The height of the take-up reel may require adjustment as it must be horizontally aligned to the media output

from the printer. Refer to the next section to verify alignment of the take-up reel height.

Take-up reel horizontal alignment

The height of the take-up reel may require adjustment as it must be horizontally aligned to the media output

from the printer. To verify alignment of the take-up reel height you need to print the take-up reel test print.

The printer will print a line across the width of the media. Use this line to check the alignment of the right

side of the take-up reel with the left side. Use the take-up reel tension bar as the horizontal reference for

alignment.

Print the take-up reel pattern on roll media to ensure that there is sufficient length to feed the media to the

tension bar on the take-up reel.

Print the take-up reel print as follows:

1. When the "Printer Ready" message appears on the Front Panel, press the ONLINE key to take the

Printer offline.

2. Press the SHIFT key twice and select the ADJUST menu using the ◄key.

3. In the ADJUST submenu, scroll to TEST PRINTS and press the ENTER key.

ENWW Take-up reel horizontal alignment 7

Installing the take-up reel

Altri manuali per Designjet 8000s Series

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali HP Accessori per stampanti

HP deskjet 5550 series Manuale

HP LaserJet P3005 Series Manuale utente

HP C Manuale utente

HP LASERJET 2600 Manuale utente

HP c8531 a Manuale utente

HP C4196A Manuale utente

HP LaserJet Enterprise M4555 Manuale utente

HP Laserjet,Color Laserjet 2550L Manuale utente

HP CM6040f - Color LaserJet MFP Laser Manuale utente

HP LaserJet 4200dtn Manuale utente

HP bt1300 Manuale utente

HP Laserjet,Color Laserjet 2550L Manuale utente

HP CP4525N COLOR LASERJET ENTERPRISE Manuale utente

HP LaserJet CF064A Manuale utente

HP Designjet T1500 series Manuale utente

HP SDCAB-0603 Manuale utente

HP 4600 - Color LaserJet Laser Printer Manuale utente

HP Q3952A Manuale utente

HP C8519A - LaserJet 9000 B/W Laser Printer Manuale utente

HP Color laserjet 5500 Manuale del prodotto

HP Designjet 10000s series Manuale utente

HP A2W77-67912 Manuale utente

HP LaserJet 4200dtn Manuale utente

HP Color laserjet 5500 Manuale utente

Manuali Accessori per stampanti popolari di altre marche

Star Micronics

Star Micronics TSP800 Series Manuale utente

REA

REA JET HR pro 2K Manuale utente

oliser

oliser MS 45 Manuale utente

Roland

Roland DU2-64 Istruzioni e ricette

Xerox

Xerox EFI EXP6000 Manuale utente

Canon

Canon Finisher-T1 Manuale utente

Sharp

Sharp FO-1MK Manuale utente

Labelmate

Labelmate PM-300 Manuale utente

Epson

Epson T6248 Manuale operativo

Epson

Epson OT-BZ20 Manuale utente

Canon

Canon TonerRobot EP-27 Manuale utente

Ricoh

Ricoh LCIT RT5100 Guida rapida

GBC

GBC 16 Series Manuale utente

Canon

Canon INNER 2-WAY TRAY-E1 Manuale operativo e di manutenzione

Develop

Develop SD-509 Manuale utente

Kyocera

Kyocera KM-6230 Manuale

Triumph Adler

Triumph Adler DF-710 Manuale

Citizen

Citizen CBM-202PC Series Manuale utente