HP C8000 - Workstation - 0 MB RAM Manuale di istruzioni
Release Notes for HP Common 3D Graphics for HP-UX 11.11 (June 2004)
on PA-RISC Based Systems (HP-UX 11.i version 1)
----------------------------------------------------------------------
Print Date: June 2004
Copyright (C) Hewlett-Packard Development Company 2004
FireGL is used under license and is a registered trademark or trademark of ATI
Technologies Inc. in the United States and other countries.
1. ANNOUNCEMENTS
These Release Notes contain information that is common to the Xlib and the
following 3D graphics APIs: HP OpenGL, Starbase, HP-PHIGS, and HP PEX. For
specific information on each API, see their respective Release Notes. The on-
line Release Notes for the 3D graphics APIs are:
Common:
/opt/graphics/common/11.00_Rel_Notes
HP PEX:
/opt/graphics/PEX5/11.00_Rel_Notes
/opt/graphics/PEX5/newconfig/opt/graphics/PEX5/11.00_Rel_Notes
Starbase:
/opt/graphics/starbase/11.00_Rel_Notes
/opt/graphics/starbase/newconfig/opt/graphics/starbase/11.00_Rel_Notes
HP-PHIGS:
/opt/graphics/phigs/11.00_Rel_Notes
/opt/graphics/phigs/newconfig/opt/graphics/phigs/11.00_Rel_Notes
HP OpenGL:
/opt/graphics/OpenGL/11.00_Rel_Notes
For additional information on each API, see the "Graphics Administration
Guide" which can be viewed at http://www.hp.com/support/workstation_manuals.
2. WHAT'S IN THIS VERSION?
The 3D graphics software released with the HP-UX 11.11 Operating Environment
June 2004 release is supported on B, C, and J-class workstations. The
following features are included with this release:
* Support for New Devices: ATI FireGL
TM
X1 and ATI FireGL T2 (supported on
C8000 workstation only)
See the following documentation for more information:
* The "Addenda -- Additional Graphics Information" section of this document
* The Release Notes for your particular 3D graphics API
These documents can be viewed at http://www.hp.com/support/workstation_manuals.
3. KNOWN PROBLEMS AND WORKAROUNDS
N/A
4. COMPATIBILITY AND INSTALLATION REQUIREMENTS
Software Requirements
=====================
None.
Hardware Requirements
=====================
With this release, Hewlett-Packard 3D graphics APIs are supported with the
following new bit-mapped graphics devices:
* ATI FireGL X1 (3D API support is limited to OpenGL only)
* ATI FireGL T2 (3D API support is limited to OpenGL only)
For detailed information about supported graphics configurations - HP-UX
computers combined with bit-mapped graphics devices - consult the "Graphics
Administration Guide".
For Graphics Information
========================
Use the "graphinfo" command to obtain information about the bit-mapped
graphics device(s) attached to your B, C, and J-class workstations. It reports
the following types of information:
* name of device (for example: HP VISUALIZE-FXE, ATI Fire GL T2)
* device driver (for use with 3D APIs)
* frame buffer configuration
* hardware features (acceleration, hardware Z-buffer)
* additional information related to HP's 3D graphics APIs
For additional information about programming applications for these devices,
consult the documentation for the 3D graphics API that you are using.
Operating System Platform Requirements
======================================
None.
Disk Space Requirements
=======================
Use swinstall to determine necessary and available disk space for the 3D
graphics API you wish to install.
5. PATCHES AND FIXES IN THIS VERSION
N/A
6. SOFTWARE AVAILABILITY IN NATIVE LANGUAGES
Localization is not planned for any 3D graphics API or the corresponding
documentation with this release.
7. TRADEMARKS
N/A
8. ADDENDA -- ADDITIONAL GRAPHICS INFORMATION
Graphics APIs
=============
Hewlett-Packard supports the following 3D graphics application programming
interface (API) libraries for use with the HP-UX 11.11 (June, 2004) release:
HP OpenGL, HP PEXlib, HP-PHIGS, and Starbase. Note that the HP PEXlib, HP-
PHIGS, and Starbase APIs are not supported on the ATI FireGL X1 and ATI FireGL
T2. For information about enhancements and changes to the current version of
each API, consult the separate Release Notes document(s) as described in the
ANNOUNCEMENTS section of this document (the Release Notes file(s) for a
particular API will not be present if the associated optional product has not
been installed on your system).
ATI FireGL X1 and ATI FireGL T2 Information
===========================================
The ATI FireGL X1 graphics device is HP's high end 3D graphics product. The
ATI FireGL T2 graphics device is HP's mid-range 3D graphics product. These
devices are supported on the following HP workstations:
* C8000
For more information on these devices (including supported visuals and other
device attributes), refer to the following documentation which can be found by
visiting HP’s website at http://www.hp.com/support/workstation_manuals:
* "Graphics Administration Guide"
* "OpenGL Implementation Guide"
Discontinuance Information
==========================
Hewlett-Packard evaluates the capabilities and device support of HP-UX on an
ongoing basis. There are no graphics devices being discontinued with this
release.
Threads Information
===================
HP's 3D graphics APIs (HP OpenGL, HP PEX, HP-PHIGS, and Starbase) all support
Level 1b threads for this release. This means HP's 3D graphics APIs can be
used in a threaded application, but all 3D graphics calls must reside in a
single thread. Other threads can be used for computations, etc.
Note that using OpenGL graphics in a Kernel threaded application requires that
the application link with libpthread.sl (not the archived version,
libpthread.a). Also note that OpenGL libraries are not cancel safe or fork
safe.
For more information on using threads, see the following documentation:
* The devresource.hp.com web site (see "Threads and Multiprocessing")
* The "OpenGL Programming Guide"
* The "OpenGL Reference Manual"
* "Threadtime" by S. Norton and M. Dipasquale
Additions to X11 Support
========================
HP’s Xfree86-based Xserver supports the ATI FireGL X1 and ATI FireGL T2
graphics devices. For more details on the features and capabilities of this
Xserver, please refer to the "Graphics Administration Guide" document.
Altri manuali per C8000 - Workstation - 0 MB RAM
5
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali HP Software
HP
HP ML110 - ProLiant G5 2TB Storage Server NAS Manuale utente
HP
HP Rx2620-2 - Integrity - 0 MB RAM Manuale utente
HP
HP StoreFabric SN6500B Manuale di servizio
HP
HP Data Protector A.06.11 Manuale utente
HP
HP Data Protector A.06.1x Guida all'installazione
HP
HP Integrity rx1600 Guida di riferimento rapido
HP
HP BAAD0010HBK-NHSN Manuale utente
HP
HP StorageWorks 2/16 - SAN Switch Manuale utente
HP
HP VL400 - Vectra - 64 MB RAM Manuale utente
HP
HP HPE XP P9500 Manuale utente
HP
HP 2230s - Compaq Business Notebook Manuale di istruzioni
HP
HP Xw460c - ProLiant - Blade Workstation Manuale utente
HP
HP StorageWorks 2/64 - Core Switch Manuale operativo
HP
HP BB118BV - StorageWorks Data Protector Express... Istruzioni operative
HP
HP 500 G2 Manuale utente
HP
HP Integrity Superdome 2 16-socket Manuale di istruzioni
HP
HP 742n - Pavilion - 512 MB RAM Istruzioni per l'installazione e il funzionamento
HP
HP D2D Manuale utente
HP
HP HP 2605dn Print Drivers Manuale di servizio
HP
HP StorageWorks 2000fc Manuale utente
Manuali Software popolari di altre marche
Canon
Canon Vixia HF21 Manuale utente
Canon
Canon ZR950 Manuale utente
Samsung
Samsung Auto Backup Manuale utente
Polycom
Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuale utente
Novell
Novell SP2 - S Manuale di istruzioni