HP NetStorage 6000 Manuale utente

Altri manuali per NetStorage 6000

12

Altri manuali HP Magazzinaggio

HP

HP S650 Manuale utente

HP

HP StorageWorks 8B - FC Entry Switch Manuale utente

HP

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Manuale di istruzioni

HP

HP LTO-3 HH Manuale utente

HP

HP STOREEVER LTO 4 Manuale utente

HP

HP Surestore 64 - Director Switch Manuale tecnico

HP

HP StorageWorks 7100 - Virtual Array Guida rapida

HP

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Manuale di istruzioni

HP

HP XP7 Manuale utente

HP

HP StorageWorks EML E Series Manuale utente

HP

HP AU183AA - 2TB Personal Media Drive Manuale d'uso e manutenzione

HP

HP StorageWorks 1510i - Modular Smart Array Manuale utente

HP

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Manuale di istruzioni

HP

HP StorageWorks 2000i Manuale utente

HP

HP C5658A - SureStore DLT 70e Tape Drive Manuale utente

HP

HP 157770-001 - DAT Drive 20/40 Tape Manuale utente

HP

HP StorageWorks MSL5000 series Manuale utente

HP

HP A5585A - SureStore DLT E Tape Library 4/40 Guida

HP

HP StorageWorks SB920c Tape Blade Istruzioni per il montaggio

HP

HP 6100 Manuale utente

HP

HP Surestore Disk Array 12h - And FC60 Manuale utente

HP

HP StorageWorks XP48 - Disk Array Manuale utente

HP

HP StorageWorks Ultrium 230 Manuale

HP

HP D6000 Disk Enclosure Manuale

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente

Dell

Dell PowerVault MD3600f Series Manuale utente

CFI

CFI TERA STOR SATA RAID IV Manuale utente

Network Interface Upgrade

HP NETSTORAGE 6000

Configurations supported:

Any combination of one or two of the following

HP NICs is supported:

•10/100 b

•Dual 10/100 b

•Gigabit 1000 Base SX

Each NIC port must be attached to a different subnet.

runking is not supported.

Parts required:

•New NIC card

Tools required:

•Phillips screwdriver

•Electrostatic protection device

NOTES:

•Use only HP NetStorage 6000 Network Interface Cards for upgrades.

•For this upgrade, you should choose a time when end-user access is not required for the unit.

Shut own the System

Open the Case

A. Remove the two screws on the back of the unit that hold

the top in place.

B. Slide the top backwards, and lift to remove.

A. Shut down the unit using either the front panel interface

or the HP NetStorage web interface.

B. After system shutdown is complete, turn off the power

switch on the back panel of the unit.

C. Disconnect both power cords from the back panel of the

unit.

All manuals and user guides at all-guides.com

all-guides.com

A. Unplug the network cable.

B. Unscrew the existing NIC and gently remove it.

NOTE: If you are installing the NIC in an unused PCI slot,

remove the expansion slot access panel.

A. Select an open PCI slot.

B. Gently place the new card in the slot, and screw it into

place.

A. Slide the top back into place.

B. Using the screwdriver, secure the top to the unit.

Add or Remove a NIC Card

Insert the New Card

Close the Case

A.

B.

All manuals and user guides at all-guides.com

Connect the Unit

A. Connect a network cable to the new port(s).

B. Reconnect the two power cords on the back panel of the

HP NetStorage unit, and plug them into your power source.

C. urn on the unit.

. Press the alarm-reset button on the front panel to turn off

the alarm. he alarm sounds whenever the unit is powered on.

A. Follow one set of the directions below:

•If your system uses DHCP, the LCD panel will display the

IP address of the first NIC port. Move to Step 8.

•If your system does not use DHCP, use the LCD panel and

arrows to configure the IP address, Subnet mask, Broadcast

address, and Gateway address (if needed) for the newly installed

NIC. Move to Step 8.

NOTE: Only one Gateway address is supported, regardless of the

number of NIC ports installed.

Enter Network Information

A.

B.

.

A. Using a computer on the network, open a web browser and enter

the unit's IP address in the browser's address or location field.

B. Select Configuration > Network Settings.

C. ype in or verify the IP address and Subnet Mask for each new NIC

you installed.

. Click Apply.

Use a Web Browser to Enter Network Settings

All manuals and user guides at all-guides.com

*C4480-90101*

C4480-90101

All manuals and user guides at all-guides.com