HPRT HLP106D Manuale utente
REVISION RECORDS
REV.
DATE
DESCRIPTION
DRAWN
CHECKED
APPROVED
1.0
2014.11.18
Preliminary
Cui Xiao
Yang Kaiqu
Ren Xiaowei
1.1
2015.01.04
1.Modify 3.7 Operation panel
Cui Xiao
Yang Kaiqu
Ren Xiaowei
1.2
2015.06.24
1.Update Important Safety Instruction
2.Change the structure of General
Specification
3.Update the printing speed to 120mm/s;
4.Change the picture of Control Panel
5.Update Chapter 5
Dorothy
Yang Kaiqu
Ren Xiaowei
CONTENTS
■Manual Information............................................................................................. 1
■Important Safety Instructions.............................................................................. 1
CHAPTER 1 PRODUCT INTRODUCTION......................................................................4
1.1 Unpacking list............................................................................................... 4
1.2 Appearance and component....................................................................... 5
CHAPTER 2 SPECIFICATION.........................................................................................7
CHAPTER 3 Installation & Usage................................................................................ 9
3.1 Power Connection........................................................................................9
3.2 Opening Printer Cover............................................................................... 10
3.3 Opening Printing Group............................................................................. 10
3.4 Loading Roll Paper......................................................................................10
3.5 Loading Ribbon.......................................................................................... 11
3.6 Label Detection.......................................................................................... 13
3.7 Connecting Interface Cable........................................................................13
3.8 Operation Panel......................................................................................... 14
3.9 Basic operation...........................................................................................15
3.9.1 Power On/Power Off.......................................................................15
3.9.2 Feed Paper...................................................................................... 15
3.9.3 Label Learning(Calibration).............................................................15
3.8.4 Printing Self Page............................................................................ 16
CHAPTER 4 INTERFACE............................................................................................. 17
4.1 USB Interface..............................................................................................17
4.2 Other Optional Interface............................................................................17
CHAPTER 5 MAINTENANCE AND ADJUSTMENT...................................................... 18
5.1 Cleaning Head............................................................................................ 18
5.2 Cleaning Sensors, Roller and/or Paper Path..............................................18
Statement
This manual content may be altered without permission, and Xiamen Hanin
Electronic Technology Co., Ltd. reserves the rights to make changes without
notice in technology, spare parts, hardware and software of the products. If more
information is needed about the products, please contact Xiamen Hanin
Electronic Technology Co., Ltd. Without any written permission from the company,
any section of this manual is prohibited to be copied or transferred in any form.
Copyright
This manual is printed in 2015, the copyright belongs to Xiamen Hanin Electronic
Technology Co. Ltd.
Printed in China
1.2 Version
Warnings :
This must be complied with in order to avoid any damage to the human
body and to the equipment.
This is showing the important information and tips for the printer operating.
Rev.1.2
1
■Manual Information
This user manual contains basic information for product usage as well as for
emergency measures that may be required.
※The following separate manuals provide more details on various technological
issues and areas.
1.Windows Driver Manual
This manual provides information on the installation instructions and main
functions of the Windows Driver.
2.Printer Utility Tool Manual
This manual provides information on the usage of software for function selection
of this product, operating condition modification, etc.
3.Programming Manual
This manual provides information on label printer commands.
■Important Safety Instructions
Before using the appliance, please carefully read the following safety regulations
in order to prevent any hazard or material damage.
1.Safety Precautions
1) Be sure to use the accompanying power charger, if not, it may cause fire,
explosion or damage.
2) Please do not open the printer cover when it is printing or just when printing
is over, do not touch the print head with hand or body, overheat may cause
Rev.1.2
2
scald.
2. Operation Precautions
1) Water or other liquid should not be spilled into the printer, the printer also
should not expose to the rain, or else may damage printer.
2) Please do not open the printer cover when it is printing, otherwise the printer
may work improperly.
3) If printing with serial interface, do not unplug the interface cable, or else
some printing data may lost.
4) Too high(40℃)or too low(0℃)temperature and too high(85%) or too
low(20%) relative humidity both affect the print quality.
5) The print paper in poor quality or stored for too long time may also reduce
the print quality, even damage the printer.
3. Storage Precautions
1) The printer should be placed in such an environment that the temperature
ranges from -40℃to 60℃, and the relative humidity is between 5% and 95%.
2) Normal thermal paper can’t be kept for long, if you need to keep the receipt
for a long period, please choose long term effective thermal paper.
3) The print paper should be keep away from high temperature environment
and direct sunshine.
4. Other Precautions
The copyright for this user manual and various other manuals is property of our
company. Any copying or conversion into electronic firm and saving of this
material without the express written permission of our company is strictly
prohibited. Use of the information contained in this manual is not subject to any
patent liability. This manual has been prepared with utmost care and attention to
detail but may contain certain errors and/or omissions. Our company is not
legally liable for any damages resulting from the use of the information in this
manual. Our company and its affiliates are not legally liable (United States
excluded) for any damages, loss, costs, and/or expenses that result from the
breakdown, malfunction, and/or misuse of the product due to violation or
neglect of the operation and maintenance information and instructions provided
Rev.1.2
3
by the our company, as well as from the unauthorized alteration, repair, and/or
modification of the product by the user and/or third party. Our company is not
legally liable for any damages and/or issues resulting from the use of options
and/or parts that are not our authentic or authorized products.
5.WEEE (Waste Electrical and Electric Equipment)
This mark shown on the product or its literature indicates that the
corresponding item should not be discarded at the end of its working
life with other household waste. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
please separate marked items from other types of waste and recycle them
responsibly to promote the sustained reuse of material resources. Household
users should contact either the retailer where they purchased this product, or
their local government office for details of where and how they can conduct
environmentally safe recycling of such items. Commercial users should contact
their suppliers and check the terms and conditions of purchase contracts. This
product should not be combined with other commercial waste for disposal.
Rev.1.2
4
CHAPTER 1 PRODUCT INTRODUCTION
1.1 Unpacking list
Notes:
1. Unpack the printer and keep the packing material in case you need to ship
the printer in the future.
2. Make sure you own all parts as follows, if not, do contact the local dealer.
Standard Accessories
Printer AC Power Adapter Power Cord
Quick Start Guide Empty Ribbon Cord CD
USB Cable
Optional Accessories(A or B)
Rev.1.2
5
1.2 Appearance and component
Figure 1-2
Rev.1.2
6
Specification of Some Part Elements
READY LED and STATUS LED
READY LED and STATUS LED are two-color(red and yellow) LED. They can
indicate the status of printer by different combination. See more information
in “3.7 Operation panel”.
External roll paper slot
HLP106D support external roll paper which can be fed by external roll paper
entry slot.
Release latch
Press down the left and right release latch simultaneously and lift the printing
group.
Paper guides
Adjust the paper guides to fix the paper according to the width of paper.
Indice
Altri manuali HPRT Stampante
HPRT
HPRT MT810 Manuale utente
HPRT
HPRT TP Series Manuale utente
HPRT
HPRT TP801 Manuale utente
HPRT
HPRT HM-E200 Manuale utente
HPRT
HPRT TP80C Manuale utente
HPRT
HPRT SK41 Manuale utente
HPRT
HPRT TP585 Manuale utente
HPRT
HPRT MPT-II Series Manuale utente
HPRT
HPRT TP585L Manuale utente
HPRT
HPRT HD100 Manuale utente
