Huawei HG633 Manuale utente

HG633 Home Gateway

Quick Start

1Connecting Cables

Installing the HG633 on a DSL Broadband Network

If you have subscribed to digital subscriber line (DSL) broadband, you can connect the

HG633 to a telephone port for Internet access.

Connect your devices in the sequence indicated in the following figure.

1 HG633 2 Telephone wall jack 3 Splitter

4 Telephone 5 Desktop computer 6 Laptop computer

7 Power adapter 8 Pad 9 Smart Phone

a LINE port b PHONE port c MODEM port

2Powering On

To power on the HG633, press its power button.

After the HG633 is powered on, the HG633 indicator turns on. The following table

lists how the indicators behave when the HG633 is operating correctly. If the

indicators do not behave as expected, ensure that everything is plugged in correctly.

Indicator Status Description

Power Green on The HG633 is powered on and ﬁnished booting.

Red on Booting is failure after the HG633 powered on.

Off The HG633 is powered off or faulty.

DSL Green on The HG633 is activated through DSL.

Green

Blinking

The HG633 is being activated through DSL.

Off The DSL port is not activated successful.

The HG633 is powered off.

Internet Green on The Internet connection is successfully

established but no data is being transmitted.

Green

Blinking

The Internet connection is successfully

established and data is being transmitted.

Red On The Internet connection is failure in PPP mode

(The user name and password for Broadband

dial-up is ineffective).

The Internet connection is failure in DHCP

mode.

Red & Green

Blinking

A ﬁrmware update is in progress.

Off No connection is set up on the port.

The HG633 is powered off.

When conﬁguring the HG633 for the ﬁrst time, use an Ethernet cable to connect the

HG633 to a computer.

Indicator Status Description

WLAN Green on 2.4G Wi-Fi®connection is set up.

5G Wi-Fi connection is set up.

Both 2.4G & 5G Wi-Fi are set up.

The HG633 is connected to a wireless client

using the Wi-Fi Protected Setup (WPS)

function.

Green

Blinking (0.5

Hz)

The WLAN connection is set up, and data is

being transmitted.

The WPS is in progress or error status.

Green

Blinking (2

Hz)

The WLAN connection is set up, and data is

being transmitted.

Off Both 2.4G & 5G Wi-Fi are disabled.

The HG633 is powered off.

LAN Green on The LAN port is connected to an Ethernet device

(such as a computer) with a network cable, but

no data is being transmitted.

Green

Blinking

The LAN port is connected to an Ethernet device

with a network cable, and data is being

transmitted.

Off No connection is set up on the port.

The HG633 is powered off.

USB Green on A portable storage device is connected to the

USB port.

No data is being transmitted.

Blinking Data is being transmitted on the USB port.

Off No connection is set up on the port.

The HG633 is powered off.

3Setting Dial-Up Connection

Parameters

The HG633 provides an intuitive web management page where you can view or set

the HG633 parameters.

1. Open a browser. In the address box, enter 192.168.1.1. Press Enter.

2. Enter the login user name (user by default) and password (HuaweiUser by

default). Click Login.

3. Choose Home tab, click Start Wizard, and select your Internet connection mode.

Refer to the following table to configure the network connection.

Scenario Connection Type

When you are unsure of the network connection

you subscribed to, you can select this mode that

the device will detect the network connection

automatically.

Connect automatically

The account name and password are provided by

your Internet Service Provider (ISP).

Connect with user account

No parameter is provided by your ISP. The IP

address is automatically assigned by the ISP.

Connect without user account

The user name and password are provided by ISP.

Set up a dial-up connection on one computer

only.

Connect with another modem

4. Set network access parameters.

If you selected Connect with user account，enter the parameters provided by

your ISP and click Next.

If you selected Connect without user account or Connect with another

modem, click Next.

Before you log in to the HG633 web management page, ensure that the computer

used for the login is connected to the HG633 and has been configured to

automatically obtain an IP address or assigned with a static IP address.

To protect against unauthorized access, change the user name and password after the

first login. When modify password successfully, this page will jump to the login page,

use the new password to log in.

5. The Internet connected is displayed on the screen, click Next.

6. In SSID and Password, set a wireless network name and password, and click

Save.

After you complete the preceding settings, check the status of the Internet indicator

light. When the Internet indicator light turns steady green, you can start browsing

the Internet.

4Wireless Connection Setup

On Windows 7

1. Click in the lower right corner of your desktop.

2. From the wireless network list, select the WLAN provided by the HG633. Click

Connect.

3. In the displayed dialog box, enter the WLAN password and click OK.

4. In the wireless network list, check the WLAN connection status. If the status is

Connected, the computer is wirelessly connected to the HG633.

5Maintenance Guide

Changing the Web Management Page Username and Password

The correct user name and password are required to log in to the web management

page. Regular changes to the web management page username and password can

effectively prevent unauthorized users from logging in and modifying important

parameters.

1. Log in to the web management page.

2. In the navigation tree, choose Maintain > Account Management.

If you selected Connect with user account or Connect without user account, the

computer automatically connects to the Internet as long as the router is working

properly.



To obtain the default SSID and key, check the label on the bottom panel. To better

secure your WLAN, promptly change the SSID and key.

Log in to the web management page, choose Home Network > WLAN

Settings > Basic Settings > Enable WLAN: to enable or disable WLAN.

3. Click Edit, in New username, enter your desired username.

4. In Current password, enter the currently used password.

5. In New password, enter your desired password. In Confirm password enter the

new password again.

6. Click Save.

When modify password successfully, this page will jump to the login page, enter the

new username and password to log in.

Changing Your WLAN Name and Password

WLAN access requires the WLAN name and password. To improve your WLAN security,

regularly change your WLAN name and password.

1. Log in to the web management page.

2. In the navigation tree, choose Home Network > WLAN Settings > Basic

Settings.

3. Select Enable WLAN 2.4 GHz or Enable WLAN 5 GHz, and click Save.

4. On the WLAN Encryption area, enter your desired name and password in SSID

and WPA pre-shared key, and click Save.

6For More Help

Thanks for purchasing the HG633 Home Gateway (HG633 for short).

This quick start guide will show you how to connect your HG633 to a network and

access the Internet. The figures in this guide are for reference only. The appearance

and display features may vary slightly depending on the actual product version.

Please visit http://consumer.huawei.com/en/support/hotline for recently updated

hotline and email address in your country or region.

7Safety Information

This section contains important information about the operation of your device. It

also contains information about how to use the device safely. Read this information

carefully before using your device.

If you forget the password, you can press and hold the Reset button for 6 seconds or

more, then the password of the Web management page will back to factory value.

This operation will make your own configuration data lost, please perform this

operation with caution.

96724102_01

Electronic device

Do not use your device if using the device is prohibited. Do not use the device if doing

so causes danger or interference with other electronic devices.

Interference with medical equipment

Follow rules and regulations set forth by hospitals and health care facilities. Do not

use your device where prohibited.

Some wireless devices may affect the performance of hearing aids or pacemakers.

Consult your service provider for more information.

Pacemaker manufacturers recommend that a minimum distance of 15 cm be

maintained between a device and a pacemaker to prevent potential interference

with the pacemaker. If using a pacemaker, hold the device on the side opposite the

pacemaker and do not carry the device in your front pocket.

Areas with flammables and explosives

Do not use the device where flammables or explosives are stored (in a gas station,

oil depot, or chemical plant, for example). Using your device in these environments

increases the risk of explosion or fire. In addition, follow the instructions indicated

in text or symbols.

Do not store or transport the device in containers with flammable liquids, gases, or

explosives.

Operating environment

Avoid dusty, damp, or dirty environments. Avoid magnetic fields. Using the device

in these environments may result in circuit malfunctions.

Before connecting and disconnecting cables, stop using the device and disconnect

it from the power supply. Ensure that your hands are dry during operation.

Place the device on a stable surface.

Keep the device away from electronic appliances that generate strong magnetic or

electric fields, such as a microwave oven or refrigerator.

During thunderstorms, power off your device and remove all cables connected to it

to protect against lightning strikes.

Do not use your device during thunderstorms to protect your device against any

danger caused by lightning.

Ideal operating temperatures are 0 °C to 40 °C. Extreme heat or cold may damage

your device or accessories.

Keep the device and accessories in a well-ventilated and cool area away from

direct sunlight. Do not enclose or cover your device with towels or other objects.

Do not place the device in a container with poor heat dissipation, such as a box or

bag.

To protect your device or accessories from fire or electrical shock hazards, avoid

rain and moisture.

Keep the device away from sources of heat and fire, such as a heater, microwave

oven, stove, water heater, radiator, or candle.

Do not place any object, such as a candle or a water container, on the device. If

any foreign object or liquid enters the device, immediately stop using it, power it

off, and remove all cables connected to it. Then, contact an authorized service

center.

Observe local laws and regulations, and respect the privacy and legal rights of

others.

Do not block device openings. Reserve a minimum of 10 cm around the device to

dissipate heat.

Stop using your device or applications for a while if the device is overheated. If skin

is exposed to an overheated device for an extended period, low temperature burn

symptoms, such as red spots and darker pigmentation, may occur.

Do not touch the device's antenna. Otherwise, communication quality may be

reduced.

Do not allow children or pets to bite or suck the device or accessories. Doing so

may result in damage or explosion.

The device should be installed and operated with a minimum distance of 20 cm

between the radiator and your body.

Keep the device in a place with good reception. The distance between the device

and other metal materials (such as metal brackets or metal doors and windows)

should be greater than 25 cm and the distance between the device should be

greater than 30 cm.

Child's safety

Comply with all precautions with regard to child's safety. Letting children play with

the device or its accessories may be dangerous. The device includes detachable

parts that may present a choking hazard. Keep away from children.

Accessories

Using an unapproved or incompatible power adapter, charger or battery may cause

fire, explosion or other hazards.

Choose only accessories approved for use with this model by the device

manufacturer. The use of any other types of accessories may void the warranty,

may violate local regulations and laws, and may be dangerous. Please contact your

retailer for information about the availability of approved accessories in your area.

Power adapter safety

The power plug is intended to serve as a disconnect device.

For pluggable devices, the socket-outlet shall be installed near the devices and shall

be easily accessible.

Unplug the power adapter from electrical outlets and the device when not in use.

Do not drop or cause an impact to the power adapter. If it is damaged, take it to

an authorized service center for inspection.

If the power cable is damaged (for example, the cord is exposed or broken), or the

plug loosens, stop using it at once. Continued use may lead to electric shocks,

short circuits, or fire.

Do not touch the power cord with wet hands or pull the power cord to disconnect

the power adapter.

Do not touch the device or the power adapter with wet hands. Doing so may lead

to short circuits, malfunctions, or electric shocks.

If your power adapter has been exposed to water, other liquids, or excessive

moisture, take it to an authorized service center for inspection.

Ensure that the power adapter meets the requirements of Clause 2.5 in IEC60950-

1/EN60950-1/UL60950-1 and has been tested and approved according to national

or local standards.

Cleaning and maintenance

During storage, transportation, and operation of the device, keep it dry and

protect it from collision.

Keep the device and accessories dry. Do not attempt to dry it with an external heat

source, such as a microwave oven or hair dryer.

Do not expose your device or accessories to extreme heat or cold. These

environments may interfere with proper function and may lead to fire or explosion.

Avoid collision, which may lead to device malfunctions, overheating, fire, or

explosion.

If the device is not going to be used for an extended period of time, power it off,

and remove all cables connected to it.

If anything unusual occurs (for example, if the device emits smoke or any unusual

sound or smell), immediately stop using it, power it off, remove all cables

connected to it, and contact an authorized service center.

Do not trample, pull, or excessively bend any cable. Doing so may damage the

cable, causing the device to malfunction.

Before you clean or maintain the device, stop using it, stop all applications, and

disconnect all cables connected to it.

Do not use any chemical detergent, powder, or other chemical agents (such as

alcohol and benzene) to clean the device or accessories. These substances may

cause damage to parts or present a fire hazard. Use a clean, soft, and dry cloth to

clean the device and accessories.

Do not place magnetic stripe cards, such as credit cards and phone cards, near the

device for extended periods of time. Otherwise the magnetic stripe cards may be

damaged.

Do not dismantle or remanufacture the device and its accessories. This voids the

warranty and releases the manufacturer from liability for damage. In case of

damage, contact an authorized service center for assistance or repair.

Disposal and recycling information

This symbol (with or without a solid bar) on the device, batteries (if

included), and/or the packaging, indicates that the device and its electrical

accessories (for example, a headset, adapter, or cable) and batteries

should not be disposed of as household garbage. These items should not

be disposed of as unsorted municipal waste and should be taken to a

certified collection point for recycling or proper disposal.

For more detailed information about device or battery recycling, contact your local

city office, household waste disposal service, or retail store.

Disposal of the device and batteries (if included) is subject to WEEE Directive Recast

(Directive 2012/19/EU) and Battery Directive (Directive 2006/66/EC). The purpose of

separating WEEE and batteries from other waste is to minimize the potential

environmental impacts and human health risk of any hazardous substances that may

be present.

Reduction of hazardous substances

This device is compliant with the REACH Regulation [Regulation (EC) No 1907/2006]

and RoHS Directive Recast (Directive 2011/65/EU). Batteries (if included) are compliant

with the Battery Directive (Directive 2006/66/EC). For up-to-date information about

REACH and RoHS compliance, please visit the web site

http://consumer.huawei.com/certification.

EU regulatory conformance

Statement

Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with

the essential requirements and other relevant provisions of Directive 1999/5/EC.

For the declaration of conformity, visit the web site

http://consumer.huawei.com/certification.

The following marking is included in the product:

This device may be operated in all member states of the EU.

Observe national and local regulations where the device is used.

This device may be restricted for use, depending on the local network.

Indice

Altri manuali Huawei Portale

Huawei

Huawei HG530 Manuale utente

Huawei

Huawei E960 HSDPA Manuale utente

Huawei

Huawei EchoLife HG531a Manuale utente

Huawei

Huawei H138-380 5G CPE Specifiche tecniche

Huawei

Huawei eSpace EGW1520 Manuale utente

Huawei

Huawei eA360 Series Manuale utente

Huawei

Huawei Echolife HG520b Manuale utente

Huawei

Huawei B933 series Manuale utente

Huawei

Huawei HG8120 series Manuale utente

Huawei

Huawei HG255e Manuale utente

Huawei

Huawei B660 Manuale utente

Huawei

Huawei EchoLife HG532 Manuale utente

Huawei

Huawei AR-Sc Series Manuale utente

Huawei

Huawei HG658d Manuale utente

Huawei

Huawei eLTE2.2 eA660 Series Manuale utente

Huawei

Huawei HG655d Manuale utente

Huawei

Huawei B311-221 Specifiche tecniche

Huawei

Huawei EchoLife HG520 Manuale utente

Huawei

Huawei HG659 Manuale utente

Huawei

Huawei HG635 Manuale utente

Huawei

Huawei HG630 Manuale utente

Huawei

Huawei DAU eA300-8a Manuale utente

Huawei

Huawei HG552d Manuale utente

Huawei

Huawei USG6305 Manuale dell'operatore

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente

RTA

RTA 460MCBC-N2E Scheda tecnica