Huawei SmartAX MT800 Manuale utente
HUAWEI
SmartAX MT800 ADSL CPE
User Manual
V100R002
SmartAX MT800 ADSL CPE
User Munal
Manual Version V1.22
Product Version
V100R002
Huawei Technologies Co., Ltd. provides customers with
comprehensive technical support and service. Please feel free to
contact our local office, customer care center or company
headquarters.
Huawei Technologies Co., Ltd.
Address: Administration Building, Huawei Technologies Co., Ltd.,
Bantian, Longgang District, Shenzhen, P. R. China
Postal Code: 518129
Website: http://www.huawei.com
Email: support@huawei.com
Copyright © 2003 Huawei Technologies Co., Ltd.
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form
or by any means without prior written consent of Huawei Technologies
Co., Ltd.
Trademarks
, HUAWEI, C&C08, EAST8000, HONET, , ViewPoint, INtess,
ETS, DMC, TELLIN, InfoLink, Netkey, Quidway, SYNLOCK, Radium,
M900/M1800, TELESIGHT, Quidview, Musa, Airbridge, Tellwin,
Inmedia, VRP, DOPRA, iTELLIN, HUAWEI OptiX, C&C08 iNET,
NETENGINE, OptiX, SoftX, iSite, U-SYS, iMUSE, OpenEye, Lansway,
SmartAX are trademarks of Huawei Technologies Co., Ltd.
All other trademarks mentioned in this manual are the property of their
respective holders.
Notice
The information in this manual is subject to change without notice.
Every effort has been made in the preparation of this manual to ensure
accuracy of the contents, but all statements, information, and
recommendations in this manual do not constitute the warranty of any
kind, express or implied.
About This Manual
Version
The product version corresponds to the manual is SmartAX MT800
ADSL CPE V100R002.
Organization of the Manual
zChapter 1 introduces the basic information of SmartAX MT800
ADSL CPE.
zChapter 2 provides a brief description of MT800, its associated
technologies and a list of features.
zChapter 3 introduces the preparation procedures before
configuring the MT800.
zChapter 4 describes how to use the embedded Web-based
management software to configure the MT800.
zChapter 5 describes the detailed configuration procedures for 6
applications.
zChapter 6 lists several FAQs and trouble-locating methods.
zChapter 7 gives the technical specifications of the MT800.
zAppendix gives the abbreviation list and default factory settings
for MT800.
Intended Readers
The manual is intended for the following readers:
zMarketing staff
zInstallation engineers & technicians
zOperation & maintenance personnel
Conventions
This manual uses the following conventions:
I. General conventions
Convention Description
Arial Normal paragraphs are in Arial.
Arial Narrow Warnings, Cautions, Notes and Tips are in Arial Narrow.
Boldface Headings are in Boldface.
Courier New
Terminal Display is in Courier New.
II. Symbols
Eye-catching symbols are also used in this manual to highlight the
points worthy of special attention during the operation. They are
defined as follows:
Caution,Warning, Danger: Means reader be extremely careful
during the operation.
Note,Comment, Tip,Knowhow,Thought: Means a
complementary description.
Environmental Protection
This product has been designed to comply with the requirements on
environmental protection. For the proper storage, use and disposal of
this product, national laws and regulations must be observed.
User Manual
SmartAX MT800 ADSL CPE Table of Contents
i
Table of Contents
Chapter 1 Basic Information.........................................................1-3
1.1 System Requirements........................................................1-3
1.1.2 Operating System....................................................1-3
1.1.3 Web Browser ...........................................................1-3
1.1.4 Ethernet Port (NIC Adapter) ....................................1-3
1.1.5 Account Information ................................................1-3
1.2 Packing List........................................................................1-3
Chapter 2 Introduction ..................................................................2-3
2.1 MT800 Overview................................................................2-3
2.1.1 Features ..................................................................2-3
2.1.2 Front Panel ..............................................................2-3
2.1.3 Rear Panel...............................................................2-3
2.2 Hardware Installation .........................................................2-3
2.2.1 Connecting ADSL Line ............................................2-3
2.2.2 Connecting the computer to MT800 ........................2-3
2.2.3 Connecting Ethernet LAN to MT800 .......................2-3
2.2.4 Powering On MT800 ...............................................2-3
Chapter 3 Before Configuring MT800 ..........................................3-3
3.1 The Reason of Configuration .............................................3-3
3.2 Configuring IP Settings on Your Computer........................3-3
3.3 Accessing the Web-based Configuration Manager ...........3-3
3.3.1 Checking for Proxy Service .....................................3-3
3.3.2 Applying the LAN IP Address of MT800..................3-3
3.3.3 User Name and Password ......................................3-3
User Manual
SmartAX MT800 ADSL CPE Table of Contents
ii
Chapter 4 Web-based Management.............................................4-3
4.1 Manager Interface Layout ..................................................4-3
4.2 System View (Home Page)................................................4-3
4.3 ATM Setting .......................................................................4-3
4.3.1 RFC2684 Bridged Connection ................................4-3
4.3.2 RFC2684 Route (IPoA) Configuration.....................4-3
4.3.3 PPP Configuration...................................................4-3
4.4 ADSL Mode Configuration .................................................4-3
4.5 LAN Configuration..............................................................4-3
4.6 DHCP Mode Configuration ................................................4-3
4.7 DNS Configuration .............................................................4-3
4.8 IP Route Table Configuration.............................................4-3
4.9 NAT Configuration..............................................................4-3
4.10 RIP Configuration.............................................................4-3
4.11 Firewall Configuration ......................................................4-3
4.11.1 Configuration of Global Firewall ............................4-3
4.11.2 Managing the Blacklist ..........................................4-3
4.12 IP Filter Configuration ......................................................4-3
4.12.1 IP Filter Global Settings.........................................4-3
4.12.2 Adding an IP Filter Rule ........................................4-3
4.13 Blocked Protocols ............................................................4-3
4.14 Diagnostics.......................................................................4-3
4.15 Access Management .......................................................4-3
4.16 Save & Reboot.................................................................4-3
4.17 Firmware Upgrade ...........................................................4-3
Chapter 5 Service Configuration..................................................5-3
5.1 Preparation for Service Configuration................................5-3
5.2 Service Types and Configuring Illustration ........................5-3
5.2.1 PPPoE Configuration ..............................................5-3
User Manual
SmartAX MT800 ADSL CPE Table of Contents
iii
5.2.2 PPPoA Configuration ..............................................5-3
5.2.3 RFC 2684 Bridged (Pure Bridge) Configuration......5-3
5.2.4 RFC 2684 Bridged (Static IP) Configuration ...........5-3
5.2.5 RFC 2684 Bridged (DHCP) Configuration ..............5-3
5.2.6 RFC 24684 Route (IPoA) Configuration..................5-3
5.3 Reference Table of Service Configuration.........................5-3
Chapter 6 Troubleshooting Guide ...............................................6-3
6.1 Quick Troubleshooting .......................................................6-3
6.2 FAQs ..................................................................................6-3
Chapter 7 Technical Specifications .............................................7-3
Chapter 8 Appendix.......................................................................8-3
8.1 Appendix A Factory Default Settings .................................8-3
8.2 Appendix B Abbreviations..................................................8-3
User Manual
SmartAX MT800 ADSL CPE Chapter 1 Basic Information
1-1
Chapter 1 Basic Information
This user manual provides instructions on how to install the
MT800 ADSL CPE and use it to connect a computer or Ethernet LAN
to the Internet.
1.1 System Requirements
To install and manage the MT800 you need a computer
equipped with an Ethernet network interface card (NIC) and a Web
browser. You may also need to use information given to you by your
ISP or ADSL service provider.
1.1.1 Operating System
The MT800 uses an HTML-based Web interface for setup and
management. The computer for configuration requires an operating
system capable of running Web browser software.
1.1.2 Web Browser
Any common Web browser can be used to configure the MT800.
The program is designed to work best with more recently released
browsers such as Microsoft Internet Explorer® version 5.0,
Netscape Navigator® version 4.7, or later versions. The Web
browser must have JavaScript enabled. Make sure JavaScript has
not been disabled by other software (such as virus protection or Web
user security packages) that may be running on your computer.
Altri manuali per SmartAX MT800
1
Indice
Altri manuali Huawei Router di rete
Huawei
Huawei B525 Manuale utente
Huawei
Huawei Vodafone B970 Manuale utente
Huawei
Huawei H112-370 Manuale utente
Huawei
Huawei WIFI AX2 Manuale utente
Huawei
Huawei HG531s Manuale utente
Huawei
Huawei Enterprise S2700 Series Manuale utente
Huawei
Huawei Quidway S3000-EI Series Manuale utente
Huawei
Huawei HW-01F Manuale utente
Huawei
Huawei WS5200 Specifiche tecniche
Huawei
Huawei B593s-22 Manuale utente
Huawei
Huawei AR200-S Series Manuale utente
Huawei
Huawei WiFi Mesh 7 Manuale utente
Huawei
Huawei AR2200 Series Manuale utente
Huawei
Huawei H112 Manuale utente
Huawei
Huawei Quidway S3526 Manuale utente
Huawei
Huawei Quidway S9300 Manuale utente
Huawei
Huawei AR150 series Manuale utente
Huawei
Huawei Quidway S1700-24-AC Manuale utente
Huawei
Huawei SmartAX MT800 Manuale utente
Huawei
Huawei AR550 Series Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza