Huawei UPS5000-E-400K-SM Manuale utente

1Overview

UPS Model Weight Dimensions (H x W x D)

UPS5000-E-400K-SM 670 kg

2000 mm x 1200 mm x 850 mm

UPS5000-E-400K-FM 710 kg

UPS5000-E-500K-SM 810 kg

UPS5000-E-500K-FM 830 kg

UPS5000-E-400K-SM/FM UPS5000-E-500K-SM/FM

The figures use the UPS in full configuration as an example. The UPS in standard

configuration does not have the mains input switch, output switch, or bypass input switch.

(1) Power modules

(2) Control module

(3) Power distribution

module cover

(4) Maintenance bypass

switch

(5) Bypass module

(6) Mains input switch

(7) Output switch

(8) Bypass input switch

Issue: 11

Part Number: 31507657

Date: 2022-12-30

UPS5000-E-(350 kVA-500 kVA)

Quick Guide (50 kVA Power Modules)

2Installing the UPS

The UPS can be installed on channel steels or on the ground.

Determine UPS mounting holes according to the marking-off template and drill the holes (if you

will floor-mount the UPS, you also need to install expansion sleeves for M12x60 expansion bolts

in the holes).

Move the power cabinet and bypass cabinet to the installation position.

1. Channel steels and expansion bolts for securing the channel steels should be purchased by the

customer. The recommended channel steel width is 50 mm or more.

2. Ensure that the spacing between external sides of a channel steel is 800 mm. Secure channel

steels to the ground by using expansion bolts.

Determining the UPS Installation Position

2.1

Unit: mm

A: mounting holes on the channel steel

B: mounting holes on the floor

1. Before installation, read the user manual carefully to get familiar with product information

and safety precautions.

2. Use insulated tools during installation and operation.

3. Only engineers certified by the manufacturer or its agents are allowed to perform UPS

installation, commissioning, and maintenance. Otherwise, personal injury or equipment

damage may occur, and the resulting UPS faults are beyond the warranty scope.

4. This document describes how to install a single UPS. For details about how to install parallel

systems, contact Huawei technical support.

•Floor mounting: Secure the cabinet to the ground by using eight M12x60 expansion bolts.

•Steel channel mounting: Secure the cabinet to steel channels by using eight M12x60

common bolts.

(1)

Cabinet mounting holes (ground installation mode)

(2)

Cabinet mounting holes (channel steel installation mode)

Securing the UPS

2.2

Installing the Front, Rear, Left, and Right Anchor Baffle Plates

2.3

UPS Cable Connection Reference

3.1

•Prepare cables away from the cabinets to prevent scraps from falling inside. Cable scraps

may ignite and cause personal injury or device damage.

•After cables have been installed, clean the cabinets in a timely manner. Keep the cabinets

and surrounding environment clean and tidy.

•You need to prepare terminals onsite. The stripped length of the copper wire should be the

same as that of the part of the terminal that covers the conductor.

The cabling route is for reference only. Connect cables based on site requirements.

3Connecting Cables

1. This document describes cable routing by removing the top cover when there are two mains

inputs.

2. In the case of single mains, you do not need to connect bypass input power cables and

remove short-circuit copper bars.

1. Open the front door of the bypass cabinet,

and remove front power distribution covers

(UPS5000-E-400K-FM is used as an

example).

3. Remove the rear cover from the bypass cabinet, and then remove the connecting copper bars

between mains input terminals and bypass input terminals. (If the mains input and bypass

input share a power source, skip this step.)

UPS5000-E-400K-SM/FM

UPS5000-E-500K-SM/FM

Connecting Cables

3.2

2. Remove the top cover from the

cabinet based on cable routes and

dimensions.

Scenario 1: Routing Cables from the Top

4. Connect the ground cable to the UPS. 5. Connect mains input power cables.

6. Connect output power cables. 7. Connect bypass input power cables.

9. Connect the signal cable.

Route a neutral wire from the

middle of the positive and negative

battery strings.

Take a battery string consisting of

40 batteries as an example. A

neutral wire is routed from the

middle of positive and negative

battery strings, each consisting of

20 batteries.

8. Connect battery cables.

Scenario 2: Routing Cables from the Bottom

For the screw

specifications and

torque used for

connecting cables in

a bottom cable

routing scenario,

refer to the top cable

routing scenario. This

section only shows

the cable routes in

the bottom cable

routing scenario.

1. Remove the cable covers from the bottom of the

cabinet, drill holes in the covers, attach grommet

strips to the hole edges for protecting cables, and

reinstall the cable covers.

2. Connect power cables and signal cables.

4Installation Verification

1. Check that there is no foreign matter in the cabinet.

(1) Switches

(2) Mains input wiring

copper bars

(3) Battery input

wiring copper bars

(4) Output wiring

copper bars

(5) Bypass input wiring

copper bars

(6) Cabinet rear

2. After verifying the installation, reinstall all the covers.

3. (Remove the paper protective film from the sealing putty.) After routing cables and verifying

cable connections, seal the gap between cables and the cabinet using sealing putty.

Sealing putty

Sealing putty must be used as a whole and

the gap can be sealed only from the top.

Paper

protective

film

5Powering On and Starting the UPS

Powering On the UPS

5.1

Close the upstream bypass and mains input switches.

(Full configuration model) Close the UPS bypass input switch, output switch, and mains input

switch.

After the UPS is powered on, initialization begins. The MDU displays the Huawei logo and an

initialization progress bar.

1. Before powering on the UPS, ensure that the UPS has passed all check items in the

UPS5000

Commissioning and Acceptance Report

and Chapter 4.

2. Measure the voltage and frequency of the UPS upstream input switch. The line voltage range

is 138–485 V AC, and the frequency range is 40–70 Hz.

4. Do not remove the dustproof cover before power-on to prevent dust inside the UPS.

Dustproof cover

Initial Startup

5.2

1. Obtain the startup password through the app. After the application is approved, enter the

password on the service authorization screen of the device to complete device authorization.

Technical support engineers can obtain the service authorization code through the app. For

details, see the

Data Center Facility Deployment Guide

2. Set the language, time, date, network parameters, and system parameters on the Settings

Wizard screen.

4. If the system has connected to the remote EPO switch, you need to choose Monitoring > UPS

System > Running Parameter > System Settings on the WebUI and set EPO detection to

Enable.

5. View the system running status diagram on the MDU to check that the UPS is working in

bypass mode.

3. After you perform the settings, the Bypass mode

and No battery alarms are reported by the MDU

and do not need to be cleared. If there is any

other alarm, you need to rectify the fault.

1. On the main menu, choose Common Functions and

tap Inv. ON.

2. In the displayed login window, enter the user name and

password, and tap .

3. In the displayed dialog box, tap Yes to start the inverter.

Starting inverter

5.3

To ensure system security,

change the LCD and WebUI

passwords after the first login.

Altri manuali per UPS5000-E-400K-SM

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Huawei UPS

Huawei

Huawei UPS2000-G-3K-V1-DR Manuale utente

Huawei

Huawei UPS2000-G-6KRTS Manuale utente

Huawei

Huawei UPS5000-A series Manuale utente

Huawei

Huawei UPS5000-S-1200 kVA Manuale utente

Huawei

Huawei UPS2000-G-6KRTS Manuale utente

Huawei

Huawei UPS5000-A-400 kVA Manuale utente

Huawei

Huawei UPS5000 Manuale utente

Huawei

Huawei UPS2000-G Series Manuale utente

Huawei

Huawei UPS5000-E Series Manuale utente

Huawei

Huawei Telecom Power TP48200A-DX12A1 Manuale utente

Huawei

Huawei SUN2000-250KTL Series Manuale utente

Huawei

Huawei UPS5000-A-500 kVA Manuale utente

Huawei

Huawei UPS5000-A-H Series Manuale utente

Huawei

Huawei UPS5000-E-60K-F60 Manuale utente

Huawei

Huawei Smartkits V100R002C00 Manuale utente

Huawei

Huawei PAC3000S12-T1 PSU Manuale utente

Huawei

Huawei UPS2000-A-6 kVA Manuale utente

Huawei

Huawei UPS5000-S-400K-SM Manuale utente

Huawei

Huawei UPS2000-H Manuale utente

Huawei

Huawei UPS2000-G-1KRTS Manuale utente

Huawei

Huawei UPS5000-A series Manuale utente

Huawei

Huawei UPS5000-E Series Manuale utente

Huawei

Huawei PDU8000 Series Manuale utente

Huawei

Huawei SmartLi 2.0 Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

CyberPower

CyberPower CP585LCD Manuale utente

Eaton

Eaton 3S Istruzioni per il montaggio

CyberPower

CyberPower Office Tower Series UPS 1000 Manuale utente

CyberPower

CyberPower BM100 Manuale utente

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente