The time is now set. Touch the Manual Adjust
screen button if you need to further adjust the time.
The radio will use the GPS satellite to set the
time. The vehicle needs to be in an open area
to receive the signal. See Global Positioning
System (GPS) on page 53 for more information.
Loading a DVD Map Disc
To load a DVD map disc, do the following:
1. Press the power/volume knob to turn the
system on.
2. Press and hold the eject key to tilt the
screen forward.
3. Insert the DVD map disc into the DVD slot.
Notice: Pressing directly on the navigation
screen may cause damage. Repairs would not
be covered by your warranty. Do not press
directly on the navigation screen.
4. To close the screen, slightly push up on the
two outer top corners until the screen is in
position, then push the screen in, by pushing
on the four outer corners, until you hear a click.
5. A notice may appear. Touch the Next screen
button to proceed.
Entering an Address, Point of Interest,
Home, and Preset Destinations
Before entering an Address, Point of Interest,
Home, or Preset Destination, select the
appropriate search area that contains the final
destination. Your vehicle must be in PARK (P)
to perform this operation.
Setting the Search Area
To set the search area, do the following:
1. If a DVD map disc is not currently loaded,
see “Loading a DVD Map Disc” earlier in
this section. If a map disc is currently loaded,
proceed to Step 2.
2. Press the power/volume knob to turn the
system on.
3. Touch the Dest screen button.
4. Touch the Change screen button.
5. Touch the appropriate Search Area numbered
screen button that contains your final
destination.
The system will return to the Destination menu.
9
