Hunter 41895-01 Manuale utente
41895-01 • 10/14/05
2
Hunter Fan Company 41895-01 • 10/14/05
3
41895-01 • 10/14/05 Hunter Fan Company
Welcome
© 2005 Hunter Fan Company
Your new Hunter® ceiling fan is an addition to your home or oce that
will provide comfort and performance for many years. is installation
and operation manual gives you complete instructions for installing
and operating your fan.
We are proud of our work. We appreciate the opportunity to supply
you with the best ceiling fan available anywhere in the world.
Before installing your fan, for your records and warranty assistance,
record information from the carton and Hunter nameplate label
(located on the top of the fan motor housing).
Cautions and Warnings
• Read this entire manual carefully before beginning installation. Save
these instructions.
• Use only Hunter replacement parts.
• To reduce the risk of personal injury, attach the fan directly to the
support structure of the building according to these instructions,
and use only the hardware supplied.
• To avoid possible electrical shock, before installing your fan,
disconnect the power by turning o the circuit breakers to the
outlet box and associated wall switch location. If you cannot lock
the circuit breakers in the o position, securely fasten a prominent
warning device, such as a tag, to the service panel.
• All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualied electrician.
• To reduce the risk of personal injury, do not bend the blade
attachment system when installing, balancing, or cleaning the fan.
Never insert foreign objects between rotating fan blades.
• To reduce the risk of re, electrical shock, or motor damage, do not
use a solid-state speed control with this fan. Use only Hunter speed
controls.
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: _______________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
Table of Contents
1 • Getting Ready ...................................................4
2 • Installing the Ceiling Plate..........................5
3 • Installing the Blade Irons.............................6
4 • Assembling and Hanging the Fan..........7
5 • Setting the Remote Transmitter
and Receiver .......................................................8
6 • Wiring the Fan..................................................9
7 • Installing the Canopy and
Canopy Trim Ring......................................... 10
8 • Assembling the Blades.............................. 11
9 • Installing the Glass ...................................... 12
10 • Operating the Remote Control
and Mounting the Holder.................... 13
11 • Operating and Cleaning
Your Ceiling Fan......................................... 14
12 • Troubleshooting......................................... 15
2
Hunter Fan Company 41895-01 • 10/14/05
3
41895-01 • 10/14/05 Hunter Fan Company
Mounting and Optional Accessories
Understanding Mounting
Hunter’s patented mounting system provides you maximum
installation exibility and ease. You can install your Hunter fan in
one of two ways, depending on your preference: Standard or Angle
mounting. e steps in this manual include instructions for both
mounting methods.
Considering Optional Accessories
Consider using Hunter’s optional accessories, including a wall-mounted
or remote speed control. To install and use the accessories, follow
the instructions included with each product. For quiet and optimum
performance of your Hunter fan, use only Hunter speed controls.
Standard Mounting hangs from
the ceiling by a downrod (included),
recommended for ceilings 8 feet or higher
Angle Mounting recommended for a
vaulted or angled ceiling
For ceilings higher than 8 feet, you
can purchase Hunter extension
downrods. All Hunter fans use sturdy
3/4” diameter pipe to assure stability
and wobble-free performance.
4
Hunter Fan Company 41895-01 • 10/14/05
5
41895-01 • 10/14/05 Hunter Fan Company
1 • Getting Ready
To install a ceiling fan, be sure you can do the following:
• Locate the ceiling joist or other suitable support in ceiling.
• Drill holes for and install wood screws.
• Identify and connect electrical wires.
• Lift 40 pounds.
If you need help installing the fan, your Hunter fan dealer can direct
you to a licensed installer or electrician.
Gathering the Tools
You will need the following tools for installing the fan:
• Electric drill with 9/64” bit
• Standard screwdriver
• Phillips-head screwdriver
• Wrench or pliers
Checking Your Fan Parts
Carefully unpack your fan to avoid damage to the fan parts. Check
for any shipping damage to the motor or fan blades. If one of the fan
blades was damaged in shipment, return all the blades for replacement.
If any parts are missing or damaged, contact your Hunter dealer or call
Hunter Technical Support Department at 888-830-1326.
Preparing the Fan Site
Before you begin installing the fan, follow all the instructions in
the pullout sheet called “Preparing the Fan Site.” Proper ceiling fan
location and attachment to the building structure are essential for
safety, reliable operation, maximum e ciency, and energy savings.
Installing Multiple Fans?
If you are installing more than
one fan, keep the fan blades in
sets, as they were shipped.
4
Hunter Fan Company 41895-01 • 10/14/05
5
41895-01 • 10/14/05 Hunter Fan Company
2 • Installing the Ceiling Plate
2-1. Drill two pilot holes into the wood support structure through the
outermost holes in the outlet box. e pilot holes should be 9/64”
in diameter.
2-2. Your fan comes with four neoprene noise isolators (“Isolators”).
Position the isolators between the ceiling plate and ceiling by
inserting the raised areas on each isolator into the holes in the
ceiling plate.
2-3. read the lead wires from the outlet box down through the hole
in the middle of the ceiling plate.
2-4. Align the slotted holes in the ceiling plate with the pilot holes you
drilled in the wood support structure. For proper alignment use
slotted holes directly across from each other.
Note: e isolators should be ush against the ceiling.
2-5. Place a at washer on each of the two 3” screws and pass the
screws through the slotted holes in the ceiling plate into the pilot
holes you drilled.
Tighten the screws into the 9/64” pilot holes; do not use lubricants
on the screws. Do not over tighten.
Step 2-2
Flat Washer
3” Screw
Steps 2-3 – 2-5
For Angled Ceilings: Be sure to
orient the ceiling plate so that the
arrows printed on the ceiling plate are
pointing towards the ceiling peak.
Ceiling
Plate
Isolator
6
Hunter Fan Company 41895-01 • 10/14/05
7
41895-01 • 10/14/05 Hunter Fan Company
3 • Installing the Blade Irons
3-1. Remove the blade mounting screws and rubber shipping bumpers
from the motor. Note: Some blade mounting screws are installed
in the motor to secure shipping blocks.
3-2. For each blade iron, insert one blade iron mounting screw through
the blade iron, and partially attach to the fan. Insert the second
blade iron mounting screw, and then securely tighten both
mounting screws.
3-3. Place the motor cover into position on the top of the motor. Insert
and tighten the three motor cover screws.
Blade Iron
Mounting
Screw
Step 3-2
Step 3-3
Blade Iron
Mounting
Screw
Motor Cover
Screw
Motor
Cover
Blade Iron
Motor Cover
Screw
6
Hunter Fan Company 41895-01 • 10/14/05
7
41895-01 • 10/14/05 Hunter Fan Company
4-1.
Insert the downrod through the canopy, canopy trim ring, spindle
cover, and spindle. Feed the wires from the fan through the downrod.
4-2. Loosen the allen head set screw on the adapter using the large
allen wrench. Screw the pipe and ball into the fan assembly.
Note: When the pipe and ball assembly is fully installed, 2-3
threads on the pipe will still be visible; this is normal.
CAUTION: e adapter has a special coating on the threads. Do
not remove this coating; the coating prevents the downrod from
unscrewing. Once assembled, do not remove the downrod.
4-3. Find the allen head set screw in the adapter on the fan by raising
and angling the spindle. Tighten the allen head set screw using
the large allen wrench provided.
4-4. Lower the spindle cover. Find the allen head set screw on the
spindle cover. Tighten the allen head set screw using the small
allen wrench provided.
4-5. Cut the lead wires from the fan a maximum length of 3-1/2 inches
from the top of the downrod. Using wire strippers on the 18AWG
setting, strip 5/16 inch from each lead wire coming from the fan.
4-6. Raise the fan and place the hook on the ceiling plate through the
U-shaped hole in the rim of the canopy.
WARNING: Fan may fall if not assembled as directed in these
installation instructions.
Steps 4-1 – 4-2
Downrod
Canopy
Canopy
Trim Ring
Allen Head
Set Screw
Spindle
4 • Assembling and Hanging the Fan
Spindle
Cover
Step 4-3
Step 4-4
Allen Head
Set Screw
Downrod
Spindle Cover
Allen Head
Set Screw
Step 4-6
U-shaped
Hole
8
Hunter Fan Company 41895-01 • 10/14/05
9
41895-01 • 10/14/05 Hunter Fan Company
5 • Setting the Remote Transmitter and Receiver
CAUTION: e remote control device complies with part 15 of the FCC rules.
Changes or modi cations not expressly approved by Hunter Fan Company could void
your authority to operate this equipment.
Operation is subject to the following two conditions:
1. is device may not cause harmful interference.
2. is device must accept any interference received, including interference that may
cause undesired operation.
WARNING: Use only the Hunter Fan speed control supplied with this fan.
5-1. IMPORTANT! Before you change the dipswitch settings, make
sure the battery is not connected to the transmitter.
Change the position of the dipswitches in the remote transmitter
and the receiver. Make sure that the dipswitches match in
the remote receiver and transmitter. If they don’t match, the
transmitter will not function.
5-2. Install the included 9-volt battery into the transmitter.
Setting Dipswitches
When two or more fans are located near each other, you may desire
to have the receiver/transmitter for each fan set to a di erent code,
so that the operation of one fan does not a ect the operation of the
other fans.
e dipswitches for the receiver are located on the at surface of the
receiver. e dipswitches for the transmitter are in the the battery
compartment.
Receiver Dipswitches
Transmitter Dipswitches
Example Dipswitch Settings
Receiver 1 Receiver 2
Transmitter 2
Transmitter 1
8
Hunter Fan Company 41895-01 • 10/14/05
9
41895-01 • 10/14/05 Hunter Fan Company
6 • Wiring the Fan
All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualied electrician.
6-1. Make sure the power is still o.
6-2. To connect the wires, hold the bare metal leads together and place
a wire nut over them, then twist clockwise until tight. For all these
connections use the wire nuts provided.
CAUTION: Be sure no bare wire or wire strands are visible after
making connections.
6-3. Using a large wire nut, connect the ground wire from the ceiling to
the green ground wire from the ceiling plate and the green ground
wire from the downrod.
6-4. Using the large wire nuts, connect the white wire and the black
wire from the ceiling as follows:
•
e white (common) power wire from the ceiling to the white
wire from the receiver (marked on red tag “NEUTRAL IN”)
• e black power wire from the ceiling to the black wire from
the receiver (marked on red tag “LIVE IN”)
6-5. Using the small wire nuts, connect the wires from the fan as
follows:
• e black/white wire from the fan to the red wire from the
receiver (marked on white tag “LIGHT OUT”)
• e black wire from the fan to the black wire from the receiver
(marked on white tag “FAN OUT”)
• e white wire from the fan to the white wire from the receiver
(marked on white tag “COMMON OUT”)
6-6. Check each connection to make sure no bare wire or wire strands
are visible. Push all wires and wire nuts, except for the white
antenna wire from the receiver, back through the ceiling plate into
the outlet box.
6-7. Position the receiver in the canopy so that the antenna is close to
the edge of the ceiling plate for clear reception.
Large Wire Nut
Steps 6-3 – 6-7
Antenna
Receiver
Small Wire Nut
10
Hunter Fan Company 41895-01 • 10/14/05
11
41895-01 • 10/14/05 Hunter Fan Company
7 • Installing the Canopy and Canopy Trim Ring
7-1. Holding the canopy, raise the fan o the hook.
7-2. Align the slots in the canopy with the tabs on the ceiling plate.
7-3. Raise the canopy over the ceiling plate. Rotate the canopy
clockwise until the tabs on the ceiling plate totally engage with
the slots in the canopy.
WARNING: When raising the canopy, make sure the antenna
from the receiver is not pinched between the canopy and ceiling
plate.
7-4. Partially install the three canopy screws into the canopy one at a
time. Once all three screws are in, tighten them securely.
7-5. Using both hands, push the canopy trim ring up to the top of the
canopy. e canopy trim ring will snap and lock into place.
Should you need to remove the canopy
trim ring, follow these steps:
1. Locate the small bumps on top of the
tabs.
2. Press rmly on opposite sides of the
ring towards the canopy. e tabs will
ex out releasing the trim ring from
the canopy.
Step 7-2
Canopy Trim
Ring
Canopy
Ceiling Plate
Step 7-3
Canopy
Screw
Steps 7-4 – 7-5
Indice
Altri manuali Hunter Fan
Hunter
Hunter 90434 Manuale utente
Hunter
Hunter 51465 Manuale utente
Hunter
Hunter Allendale Manuale di istruzioni
Hunter
Hunter Melbourne Manuale utente
Hunter
Hunter N6SY Manuale utente
Hunter
Hunter Burleson Manuale utente
Hunter
Hunter Rosner Manuale utente
Hunter
Hunter 28789 Manuale utente
Hunter
Hunter 25866 Manuale di istruzioni
Hunter
Hunter 25511 Manuale di istruzioni
Hunter
Hunter Brayden 21325 Manuale
Hunter
Hunter Warrant Manuale utente
Hunter
Hunter 23869 Manuale
Hunter
Hunter Hunter Ceiling fans Manuale utente
Hunter
Hunter 53319 Manuale utente
Hunter
Hunter Cosenza Manuale utente
Hunter
Hunter 25522 Manuale
Hunter
Hunter 22563 Manuale
Hunter
Hunter 21970 Manuale
Hunter
Hunter 42783-01 Manuale di istruzioni
