Hunter Hunter Ceiling fans Manuale utente

41557-01 3/12/2002

Installation and Operation Manual

For Hunter Ceiling Fans

SINCE 1886

41557-01 3/12/2002

241557-01 3/12/2002

41557-01 3/12/2002

CONGRATULATIONS!

Your new Hunter ceiling fan is an

addition to your home or office that

will provide comfort and perfor-

mance for many years. This manual

gives you complete instructions for

installing and operating your fan.

We are proud of our work. We ap-

preciate the opportunity to supply

you with the best ceiling fan avail-

able anywhere in the world.

Before installing your fan, record the

following information for your

records and warranty assistance.

Please refer to the carton and the

Hunter nameplate (located on top

outside fan motor housing) for the

proper information.

3/12/2002

Model Name __________________

Catalog No. ___________________

Serial No. _____________________

Date Purchased ________________

Where Purchased ______________

_____________________________

Please attach your Part Guide to this

manual for future reference.

Attach Your Receipt

or a Copy of

Your Receipt Here

441557-01 3/12/2002

CONTENTS

CONGRATULATIONS!.......................................................................................................................................... 3

IMPORTANT INFORMATION ................................................................................................................................. 5

STEP 1 - GETTING READY ................................................................................................................................... 6

STEP 2 - INSTALLING THE CEILING PLATE............................................................................................................. 8

STEP 3 - ASSEMBLING PIPE/BALL ASSEMBLY ..................................................................................................... 10

STEP 4 - ASSEMBLING THE FAN ........................................................................................................................ 12

STEP 5 - WIRING THE FAN ................................................................................................................................. 13

STEP 6 - HANGING THE FAN ............................................................................................................................. 15

STEP 7 - ASSEMBLING FAN BLADES .................................................................................................................. 16

STEP 8 - ATTACHING THE SWITCH HOUSING .................................................................................................... 18

STEP 9 - REPLACING THE LIGHT BULB ............................................................................................................... 21

OPERATING YOUR HUNTER FAN ....................................................................................................................... 22

TROUBLESHOOTING ......................................................................................................................................... 24

41557-01 3/12/2002

IMPORTANT INFORMATION

not lock the circuit breakers in

the off position, securely fas-

ten a prominent warning de-

vice, such as a tag, to the ser-

vice panel.

• This fan is suitable for wet lo-

cations when installed in a

GFCI protected branch circuit.

All wiring must be in accor-

dance with national and local

electrical codes. If you are un-

familiar with wiring, you

should use a qualified electri-

cian.

• To reduce the risk of personal

injury, do not bend the blade

attachment system when in-

stalling, balancing, or cleaning

the fan. Never insert foreign

objects between rotating fan

blades.

DO YOU NEED HELP?

To install a ceiling fan, be sure you

can do the following:

• Locate ceiling joist or other suit-

able support in ceiling.

• Drill holes for and install wood

screws.

• Identify and connect electrical

wires.

• Lift 40 pounds.

If you need help installing the fan,

your Hunter fan dealer can direct you

to a licensed installer or electrician.

• To reduce the risk of fire, elec-

trical shock, or motor dam-

age, do not use a solid-state

speed control with this fan.

Use only Hunter speed con-

trols.

WARNINGS

• To avoid possible electrical

shock, before installing

your fan, disconnect the

power by turning off the

circuit breakers to the out-

let box and associated wall

switch location. If you can-

CAUTIONS

• Read entire booklet carefully

before beginning installation

and save these instructions.

• To reduce the risk of personal

injury, attach the fan directly

to the support structure of the

building according to these in-

structions, and use only the

hardware supplied.

WARNINGS

641557-01 3/12/2002

GATHERING THE TOOLS

You will need the following tools for

installing the fan:

• Electric drill with 9/64" bit

• Standard screwdriver

• Phillips-head screwdriver

• Wrench or pliers

STEP 1 - GETTING READY

PREPARING THE FAN SITE

The location of a ceiling fan and how

the fan is attached to the building

structure are essential for reliable

operation, maximum efficiency, and

energy savings. For this reason, we

have included a separate booklet —

“Guide to Choosing and Preparing

a Ceiling Fan Site” — to help you

select the best location for your fan.

The booklet also provides informa-

tion to ensure your fan support and

electric outlet box meet UL-approved

safety codes for ceiling fans.

The instructions in this installation

manual assume that you have used

“Guide to Choosing and Preparing

a Ceiling Fan Site” to pick the fan

location and make certain the proper

fan support and outlet box are in-

stalled.

CHECKING YOUR FAN PARTS

Carefully unpack your fan to avoid

damage to the fan parts. Check for

any shipping damage to the motor

or fan blades. If one of the fan blades

was damaged in shipment, return all

the blades for replacement.

Hint: If you are installing more than

one fan, keep the fan blades

in sets, as they were shipped.

The fan includes a separate diagram

of the screws and other small parts

needed for the fan. Keep this dia-

gram handy for identifying parts dur-

ing installation; the diagram indicates

the step in which each part is used.

If any parts are missing or damaged,

contact your Hunter dealer or call

Hunter Parts Department at

901-248-2222.

41557-01 3/12/2002

INSTALLATION METHOD

Standard Mounting (Figure 1) hangs

from the ceiling by a connector pipe

(included), for ceilings 8 feet or

higher. For ceilings higher than eight

feet, you can purchase Hunter exten-

sion rods. All Hunter fans use sturdy

3/4" diameter pipe to assure stabil-

ity and wobble-free performance.

Figure 1 - Standard Mounting

12"

841557-01 3/12/2002

STEP 2 - INSTALLING THE CEILING PLATE

1. Drill two pilot holes into the wood

support structure through the

outermost holes on the outlet

box. The pilot holes should be

9/64" in diameter.

2. Install two of the three #10-32 X

3/8" canopy screws halfway into

the mounting screw holes located

on the side of the ceiling plate.

See Figure 2a.

3. Place the ceiling gasket over the

ceiling plate so that the slots and

raised surfaces on the ceiling gas-

ket align with the slots and holes

on the ceiling plate.

4. Thread the lead wires from the

outlet box through the hole in the

middle of the ceiling plate/gasket

assembly.

Figure 2a - Installing ceiling plate and

gasket assembly

5. Align the slotted holes in the ceil-

ing plate with pilot holes in the

wood support structure. Note:

The ceiling gasket should be flush

against the ceiling.

Ceiling

Plate

Ceiling

Gasket

6. Pierce holes in the ceiling gasket

through the slots in the ceiling

plate at a spacing to match the

holes you drilled in sub-step 1.

7. Place a flat washer on each of the

two 3" screws and pass the

screws through the slotted holes

in the ceiling plate as shown in

Figure 2b.

8. Tighten the screws into the 9/64"

pilot holes; do not use lubricants

on the screws. Do not over-

tighten.

41557-01 3/12/2002

Figure 2b - Attaching Ceiling Plate to

2 x 4 Brace

2x4 Brace

Ceiling

Plate

Flat

Washer

3" Wood

Screw

Gasket

10 41557-01 3/12/2002

Included with the fan are two pipes:

one 4 1/2" long pipe/ball assembly

for standard mounting and one 2 1/2"

long pipe for flush mounting. See

Figure 3a.

If you are going to install the fan us-

ing the standard mounting, go to

"Step 4 - Assembling the Fan."

If you are going to install the fan us-

ing the flush mounting, complete

the steps below.

REMOVING BALL ASSEMBLY

For the following steps refer to

Figures 3b and 3c.

1. Locate the 4 1/2" pipe/ball as-

sembly.

2. Remove the positioning screw

from the top of the ball.

STEP 3 - ASSEMBLING PIPE/BALL ASSEMBLY

WARNINGS

Figure 3a - Pipes

Figure 3b - Removing ball assembly

NOTE: The ball will become

loose and should slide down the

pipe.

3. Remove the ball from the pipe.

4. Remove the pin from the pipe.

5. Carefully loosen and remove the

ground screw/leadwire assembly

from the pipe.

6. Locate the 2 1/2" pipe.

4 1/2"

Pipe/Ball

Assembly

2 1/2" Pipe

Positioning Screw

Leadwire

Assembly

Ball

Ground

Screw

Altri manuali per Hunter Ceiling fans

Indice

Altri manuali Hunter Fan

Hunter

Hunter Bryn Manuale utente

Hunter

Hunter 20168 Manuale di istruzioni

Hunter

Hunter 21564 Manuale di istruzioni

Hunter

Hunter Minimus Manuale utente

Hunter

Hunter Type 3 Models Manuale utente

Hunter

Hunter 21729 Manuale

Hunter

Hunter Crown Canyon II Manuale utente

Hunter

Hunter 7 Models Manuale di programmazione

Hunter

Hunter M3571-01 Manuale utente

Hunter

Hunter Type 2 Series Manuale utente

Hunter

Hunter Dempsey Manuale utente

Hunter

Hunter 21978 Manuale

Hunter

Hunter Melbourne Manuale utente

Hunter

Hunter 28743 Manuale

Hunter

Hunter 52613 Manuale utente

Hunter

Hunter 42667-01 Manuale di istruzioni

Hunter

Hunter 23963 Manuale di istruzioni

Hunter

Hunter Type 2 Series Manuale di servizio

Hunter

Hunter 51476 Manuale utente

Hunter

Hunter 51470 Manuale utente

Hunter

Hunter 21361 Manuale

Hunter

Hunter Granville Manuale di istruzioni

Hunter

Hunter 50008 Manuale utente

Hunter

Hunter Castleton 55043 Manuale

Manuali Fan popolari di altre marche

ELTA FANS

ELTA FANS H03VV-F Manuale utente

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuale utente

Panasonic

Panasonic FV-15NLFS1 Manuale utente

Kompernass

Kompernass KH 1150 Manuale utente

VES

VES FALA100/12V/TR Manuale utente

Vertiv

Vertiv Liebert DCD Manuale utente

Westinghouse

Westinghouse GFP Series Manuale utente

Venmar

Venmar KUBIX HRV PLUS Series Manuale utente

Maico

Maico ECR 31 Manuale utente

Sonnenkonig

Sonnenkonig Dinky Manuale utente

S&P

S&P ECOWATT HXBR Manuale utente

Wider

Wider IMP03369BH Manuale utente

Panasonic

Panasonic F-60DHN Manuale utente

Hinkley

Hinkley HIGHLAND Manuale utente

Broan

Broan 766BN Manuale utente

Premium

Premium PFS16022 Istruzioni per il montaggio

Litex Industries

Litex Industries E-CGL52CB5C1 Manuale utente

Lindab

Lindab LTDF Manuale utente