Hunter SRR Istruzioni operative
Remote Control System
Owner’s Manual and
Installation Instructions
For use with Hunter
SRC, Pro-C, and ICC
Controllers
SRR
®
Introduction .............................................................................................................................................. 1
SRR Components ...................................................................................................................................... 2
Wiring Harness/SmartPort® Connection Kit ................................................................................................ 5
Installing the SRR Remote Wiring Harness ................................................................................................. 6
Wiring the SmartPort® to Hunter Controllers .............................................................................................. 7
Typical Installation
Receiver Mounted Indoors ..................................................................................................................... 8
Connection of Receiver on a Temporary Basis from Outside of a Garage or Building ................................. 8
Maximizing Operating Range ...................................................................................................................... 9
Extending Wiring on SmartPort® Harness ................................................................................................. 10
Preparing the Transmitter For Use ............................................................................................................ 11
Installing the Transmitter Battery ............................................................................................................. 12
Changing the Remote Activated Station Run Time ..................................................................................... 13
Changing the Transmitter Address ............................................................................................................ 14
Changing the Maximum Station Number ................................................................................................... 16
Preparing the Receiver For Use ................................................................................................................ 18
Changing the Receiver Address ................................................................................................................ 19
Activating a Station with The SRR Remote Control System ........................................................................ 20
A Word About Range ............................................................................................................................... 22
TABLE OF CONTENTS ........................................................................
Troubleshooting Guide ............................................................................................................................. 23
Specifications .......................................................................................................................................... 24
FCC Compliance Notice ............................................................................................................... Back Cover
TABLE OF CONTENTS (continued) ...................................................
1
Finally, there’s no need to walk back to the controller to start and stop a manual watering cycle when doing
maintenance or repair work on your irrigation system. Finally, winterization can be done quickly and easily
with one worker instead of two. Finally no more going back to the garage to start or stop a manual irrigation
cycle.
Hunter is pleased to introduce the SRR–A Simple and Reliable Remote Control System for use with our SRC,
Pro-C, ICC, and future controllers. The SRR can offer you features other remotes can’t, at a price you can afford.
The SRR transmitter is made of sturdy ABS and has no external antenna to get in the way. It features a large
LCD and four-button operation. Don’t let its size fool you–while it’s small enough to fit in your shirt pocket, it
has an open field range of up to 450 feet.
The large LCD display and simple four-button control make the SRR a snap to use. Simply press the or
keys to display the station or program you want to turn on or off, then press the or button–what could
be easier? Don’t worry about forgetting to turn off the SRR. After several minutes of inactivity the unit turns
itself off to extend battery life. Then, the unit can be turned back on by touching any button. A standard 9-volt
alkaline battery will last an entire season for a contractor, and years for a homeowner.
We believe the SRR is the simplest remote control available. It is so easy to use that you will need this
booklet very little after installation. If you do have a question, keep this in a safe place for easy reference.
Congratulations– your life just got a little easier!
INTRODUCTION ..................................................................................
2
SRR COMPONENTS ...........................................................................
TRANSMIT
RUNTIME
ADDRESS
1
42
3
8657
9
10 11
12
13
14
15
TRANSMITTER RECEIVER SmartPort®
3
This section will give you a brief description of the
components of the SRR. Each item will be discussed
in further detail later, however this section can be
helpful in getting acquainted with the Transmitter,
Receiver, and SmartPort®.
TRANSMITTER
A. LCD Display
1. Run Time – Indicates the Station Run Time is
being set when flashing.
2. Transmit – Indicates that the Transmitter
is transmitting the programmed data to the
receiver.
3. Main Display – Indicates various times and
values.
Number – Indicates either Station Run Time (1
to 30) or Station number (1 to 48).
On – Indicates Transmitter is turning on a
particular station.
Off – Indicates Transmitter is turning off a
particular station.
Program (A, B, C) – Indicates program
selected.
4. Address – Indicates that a new address for
transmitting between the Transmitter and the
Receiver is being set.
B. Control Buttons
5. – Increases the selected flashing display.
6. – Decreases the selected flashing display.
7. – Selects the selected flashing display.
8. – Cancels the selected flashing display.
C. Other
9. Battery Cover – Covers compartment for 9-
volt alkaline battery.
4
SRR COMPONENTS (CONTINUED) .................................................
RECEIVER
10. Control Button – Hold button down when
plugging Receiver into SmartPort® when
programming a new address.
11. SmartPort Outlet (Male) – Outlet on back
of Receiver that plugs into the SmartPort
harness.
12. Antenna – Receives signals from Transmitter
from up to 450’.
SmartPort
®
13. SmartPort Outlet (Female) – Outlet on
front of SmartPort® that plugs into the SRR
Receiver or other Hunter product.
14. Rubber Cover – Protects SmartPort from dirt
and weather.
15. Control Wires – Red, white, and blue wires
that connect to the terminal strip area of the
controller.
5
To utilize the SRR Remote Control System, your
controller must be equipped with the SmartPort
wiring/harness connection kit. This wiring harness
provides the connection port where the SRR receiver
is attached.
The SmartPort wiring harness is included with the
purchase of the SRR. Additional SmartPorts may
be purchased separately to allow you to utilize the
transmitter and receiver with additional Hunter
controllers.
WIRING HARNESS/SmartPort
®
CONNECTION KIT .....................
6
1/2" Thread
To Controller
Pre-assembled Assembled
Figure 1
NOTE: Any extension of the wires
provided with the standard wiring
harness may result in an error message
on the controller display and possible
malfunction of the remote due to radio
interference. In some situations,
lengthening of the standard harness
may work fine, in others it may not
work at all (it is site specific). In
either case, it is recommended that
installations where the SmartPort®
outlet will be located more than 5 feet
from the controller that the installation
be done using the shielded cable
wiring harness (SRR-SCWH) to
minimize the possible effects of
electrical noise. See page 7 for
information.
1. Install a ½" female threaded “Tee” in the field
wiring conduit approximately 12" from the SRC,
ICC, and Pro-C controllers.
NOTE: While the SmartPort has a
protective cover to allow for outdoor
installation, the SRR Receiver should
only be used on a temporary basis,
as the Receiver is not designated for
permanent outdoor mounting.
2. Feed the red, white, and blue wires of the
SmartPort through the base of the “Tee” and into
the controller wiring compartment as shown in
Figure 1.
3. Screw the SmartPort housing into the “Tee”
(or other fitting) as shown in Figure 1.
INSTALLING THE SRR REMOTE WIRING HARNESS ..................
Indice
Altri manuali Hunter Telecomando
Hunter
Hunter 21117 Manuale di istruzioni
Hunter
Hunter 146-59-1 Manuale
Hunter
Hunter 84592 Manuale utente
Hunter
Hunter 99772 Manuale utente
Hunter
Hunter 99179 Manuale utente
Hunter
Hunter ROAM XL Istruzioni operative
Hunter
Hunter 99110 Manuale utente
Hunter
Hunter 85095 Manuale utente
Hunter
Hunter 41316-01 Manuale di istruzioni
Hunter
Hunter 99370 Manuale utente
Hunter
Hunter 99770 Manuale utente
Hunter
Hunter 99123 Manuale utente
Hunter
Hunter 99112 Manuale utente
Hunter
Hunter 27157 Manuale utente
Hunter
Hunter ICR Manuale di servizio
Hunter
Hunter 99123 Manuale utente
Hunter
Hunter SimpleConnect 99107 Istruzioni per il montaggio
Hunter
Hunter Ceiling Fan & Video Manuale utente
Hunter
Hunter 21117 Manuale di istruzioni
Hunter
Hunter Roam Istruzioni operative
