Hypertherm HT2000 Manuale di riferimento

THC Motherboard Relay

Replacement

Kit: 128404

Field Service Bulletin

IM-356

(P/N 803560)

Revision 0 April, 1999

Hypertherm, Inc.

Hanover, NH

http://www.hypertherm.com

email:[email protected]

Hypertherm, HyDefinition, HT, HyLife, LongLife, MAX, PAC and Powermax are trademarks of Hypertherm, Inc.,

and may be registered in the United States and/or other countries

Hypertherm Offices Worldwide

Hypertherm, Inc.

Etna Road, P.O. Box 5010

Hanover, NH 03755 USA

Tel.: (603) 643-3441 (Main Office)

Fax: (603) 643-5352 (All Departments)

Tel.: (800) 643-9878 (Technical Service)

Tel.: (800) 737-2978 (Customer Service)

Hypertherm Plasmatechnik GmbH

Technologiepark Hanau

Rodenbacher Chaussee 6

D–63457 Hanau-Wolfgang, Germany

Tel.: 49 6181 58 2100

Fax: 49 6181 58 2134

European Technical Support Organization (ETSO)

Technologiepark Hanau

Rodenbacher Chaussee 6

D–63457 Hanau-Wolfgang, Germany

Tel.: 49 6181 58 2100

Fax: 49 6181 58 2134

Hypertherm Singapore Pte Ltd

No. 19 Kaki Bukit Road 2

K.B. Warehouse Complex

Singapore 417847, Republic of Singapore

Tel.: 65 841 2489

Fax: 65 841 2490

Hypertherm U.K.

9 Berkeley Court • Manor Park

Runcorn, Cheshire, England WA7 1TQ

Tel.: 44 1928 579 074

Fax: 44 1928 579 604

France

10, Allée de I’lsara

F-95000 Cergy-Pontoise, France

Tel.: 33 1 34 24 03 05

Fax: 33 1 34 25 09 64

Italy

Via Torino 2

20123 Milan, Italy

Tel.: 39 02 725 46 312

Fax: 39 02 725 46 400

THC Motherboard Up / Down DC Relay Replacement

Page 1

Field Service Bulletin 803560

WARNING

ELECTRIC SHOCK CAN KILL

MODIFICATION MUST BE PERFORMED ONLY BY HYPERTHERM TECHNICIANS,

DISTRIBUTORS OR QUALIFIED ELECTRONICS TECHNICIANS

HT2000, HT2000LHF, MAX200, HT4100: Push the OFF (0) button on the power

supply and turn the main disconnect switch OFF before removing the front panel of the

power supply.

HT4001: Position the ON/OFF circuit breaker on the rear of the power supply to the

OFF (O) position and turn the main disconnect switch OFF before removing the rear

panel of the power supply.

128404 Kit Contents

Part No. Description Qty

003111 Relay: .02-1A@10-200 VDC, Solid State 2

803560 FSB: THC Motherboard Up/Down DC Relay Replacement 1

INTRODUCTION

This field replacement kit is for customers that have an HT4001, HT4100, HT2000, HT2000LHF or MAX200

power supply with the on-board torch height (THC) control system, and who need to interface the THC torch

UP/DOWN motion signals with a DC torch-lifter motor.

THC Motherboard Up / Down DC Relay Replacement

Page 2

Field Service Bulletin 803560

Relay Replacement

The stock THC motherboard comes with AC relays for torch UP and DOWN control. These 2 relays, CR2 and

CR3 must be removed from the motherboard and replaced with the 003111 DC relays from this kit.

HT2000, HT2000LHF, MAX200, HT4100:

1. Remove the power supply front panel.

HT4001:

1. Remove the power supply rear panel.

All Systems:

2. Locate the THC motherboard.

3. Remove 4 screws that fasten the plastic THC cover to the THC pcb assemblies.

THC Motherboard

Remove screws

THC Motherboard Up / Down DC Relay Replacement

Page 3

Field Service Bulletin 803560

4. Locate CR2 and CR3 on the THC motherboard.

CR2

CR3

5. Remove the screws securing CR2 and CR3 to the motherboard.

6. Gently pull the CR2 and CR3 relays from their sockets.

7. Insert the 003111 relays into the motherboard sockets.

8. Reinstall the CR2 and CR3 screws to secure the 003111 relays to the motherboard.

9. Refasten the THC plastic cover to the THC motherboard.

10. Reinstall the power supply covers.

Installation is complete. Refer to your system instruction manual to connect the machine interface cable to the

torch lifter motor.

Altri manuali per HT2000

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Hypertherm Sistema di saldatura

Hypertherm

Hypertherm HPR130 Manuale utente

Hypertherm

Hypertherm HT40C Manuale utente

Hypertherm

Hypertherm powermax65 Manuale di riferimento

Hypertherm

Hypertherm Powermax125 Manuale utente

Hypertherm

Hypertherm Powermax105 Manuale di riferimento

Hypertherm

Hypertherm Powermax30 AIR Manuale di riferimento

Hypertherm

Hypertherm Powermax 1000 Manuale di riferimento

Hypertherm

Hypertherm Freedom 38 PPA Manuale utente

Hypertherm

Hypertherm Powermax45 XP Scheda tecnica

Hypertherm

Hypertherm powermax 350 Manuale utente

Hypertherm

Hypertherm POWERMAX350 Manuale utente

Hypertherm

Hypertherm Powermax30 AIR Manuale utente

Hypertherm

Hypertherm powermax65 Manuale di riferimento

Hypertherm

Hypertherm HyDefinition HD3070 Manuale utente

Hypertherm

Hypertherm HyDefinition HD3070 Foglio di istruzioni

Hypertherm

Hypertherm powermax 380 Manuale utente

Hypertherm

Hypertherm HyPerformance HPR130XD Manuale utente

Hypertherm

Hypertherm Powermax30 AIR Manuale utente

Hypertherm

Hypertherm HT4100 Manuale utente

Hypertherm

Hypertherm XPR300 Manuale utente

Hypertherm

Hypertherm MAX200 Manuale di riferimento

Hypertherm

Hypertherm POWERMAX 45 Manuale di riferimento

Hypertherm

Hypertherm MAX43 Manuale utente

Hypertherm

Hypertherm Powermax 85 Manuale utente

Manuali Sistema di saldatura popolari di altre marche

Berner

Berner PLASMACUT 54 Manuale utente

Pro Spot

Pro Spot PR-155 Manuale utente

Forney

Forney 210 Manuale utente

Thermal Arc

Thermal Arc 400S Manuale utente

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuale utente

GYS

GYS PROTIG 201 AC/DC Manuale utente

TAFA

TAFA 30*8B35 Manuale utente

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuale utente

ESAB

ESAB Buddy Arc 145 Manuale utente

CIGWELD

CIGWELD 636804 Guida rapida

Red-D-Arc

Red-D-Arc DC-400 Manuale utente

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuale utente

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuale utente

WIA

WIA Weldmatic 270 CP132-2 Manuale utente

Sonics

Sonics H520T Manuale utente

Miller

Miller Big Blue 400D Manuale utente

NewArc

NewArc RT2000 Guida rapida

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manuale utente