i-MO AT-7 Manuale utente
AT-7 User Guide
3
Safety Instructions
Product Features
Product and Components
Identify each part
Making connecting to your PC
Driver Program Installation (For Windows OS)
USB Monter
Touch
Configuration Touchside Utility
Driver Program Installation (For Mac OS)
USB Monter
Touch
Configuration Touchside Utility
Using Touch USB sub monitors
Troubleshooting
Specifications
FCC Information
※ It is required to install the USB monitor driver and the touch driver
in order to use "IMO touch" monitor properly.
4
6
7
8
9
10
10
11
15
21
21
21
23
26
28
31
32
..........................................................
............................................................
...............................................
............................................................
........................................
...............
........................................................
..................................................................
...........................
........................
........................................................
..................................................................
............................
.....................................
..............................................................
..................................................................
..............................................................
CONTENTS
4
Safety Instructions
Precautions
Safety
Before using this unit please read these operating instructions carefully.
Take special care to follow the warnings indicated on the unit itself as well as the safety
suggestions listed below. Afterwards keep them handy for future reference.
1. Power Source – The unit should be connected to USB Cable only of the type described
in the operating instructions or as marked on the unit.
2. Power Cord USB Cable Protection – USB Cable should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them.
Never take hold of the USB Cable if your hands are wet, and always grasp the plug body when
connecting or disconnecting it.
3. Periods of non-use – When the unit is not in use turn off the power. When left unused for
a long period of time, the unit should be unplugged from the USB slot of the PC.
Installation
1. Water and Moisture – Do not use this unit near water, for example, near a bathtub, washbowl,
swimming pool or the like.
Damp basements should also be avoided.
2. Heat – The unit should be situated away from heat sources such as radiators and the like.
It also should not be placed in temperatures less than 5◦C (41◦F) or greater than 35◦C (95◦F).
Placement
1. Ventilation – The unit should be situated so that its location or position does not interfere
with its proper ventilation.
2. Foreign Material – Care should be taken so that objects do not fall into and liquids are not
spilled into the unit.
Do not subject this unit to excessive smoke, dust, mechanical vibration or shock.
3. Stacking – Do not place heavy objects on top of the unit.
4. Surface – Place the unit on a flat and level surface.
5. Wall or Ceiling mount – The unit should not be mounted on the wall or ceiling unless specified
in the operating instructions.
AT-7 User Guide
5
Safety Instructions
Maintenance
Service
Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene.
1. Damage Requiring Service – The unit should be serviced by a qualified service person when:
a. The Power supply cord(USB Cable) has been damaged; or
b. Objects have fallen or liquid has been spilled into the unit; or
c. The unit has been exposed to rain; or
d. The unit does not appear to operate normally or exhibits a marked change in performance; or
e. The unit has been dropped, or the enclosure is damaged.
2. Servicing – The user should not attempt to service the unit beyond described in the
operating instructions.
All other servicing should be referred to a qualified service personnel.
6
Product Features
No power cable required.
Simple access to PC with USB cable.
High speed 2.0 USB interface.
Pivot function.
Bright 7” TFT active matrix LCD screen (800x480)
Brightness adjustable.
Application of removable type stand for portable use.
USB
Pivot function
High quality LCD panel
Full Touchscreen Interface
Touchscreen
Removable Stand
AT-7 User Guide
7
Product and Components
This product is packaged with the following components.
ManualInstallation CD
StandFrame Portable Stand
USB Cable
8
The back of the product
It describes the appearance and the name of each part.
Some differences in appearance and function might occur depending on the model
Identify each part
①Brightness
Control Button
②USB Slot
④Stand Joint
③
Stand Joint
⑤Power Switch
No. Name Description
1 Brightness Control Button
2 USB Slot
[ + ] Set Brightness up.
[- ] Set Brightness down.
Connect monitor to PC by using USB Cable.
3 Swivel type stand joint.
4 Stick type stand joint.
5 Switch the power on or off
Stand Joint
Power Switch
9
AT-7 User Guide
When connecting the USB cable to the PC’s USB port, connect [A] part to the PC and [C] part to
the device. Connect [B] part to the PC’s other USB port when there when there is insufficient
power supply from only one USB connection.
Connect the USB cable to the PC’s USB port and to the
device.
Note
Make sure that the PC’s power is turned off when connecting
the cable.
AC
B
Making connecting to your PC
This product is powered by USB cable only.
Note
10
Turn on the PC and connect the PC with the device by using the USB cable included with USB sub-monitor
(AT-7). When the device is connected to the PC using USB cables, adequate power will be supplied
to the device.
1. Insert the included installation CD.
When the CD is inserted, the driver Installer image will
be displayed
● USB Monitor Driver
● Touch Driver
● Exit
2. Select the ‘USB Monitor Driver’ button.
- When ‘Auto Install’ processing is not activated, click on the
“AutoRun” file on the driver CD for Installation.
- Power or USB cable disconnection, during the process of
installation may cause serious error on the PC or OS system.
Note
Driver Program Installation (For Windows OS)
4. USB installation program will be automatically started.
3. After selecting the ‘USB Monitor Driver, the installation
process will be displayed.
Click [Agree] to proceed with the installation process.
Terms of use will be displayed. Click [Agree].
Please operate the PC with the owner’s ID and password for
proper installations. Please read the terms of use thoroughly
before clicking [Agree] button.
● When [AT-7] icon is formed at the right corner of the
task bar, USB driver installation is completed.
● Remove the CD from the PC.
● Use [Remove Hardware Safely] function to remove the
USB cable safely.
● Reboot the PC.
Note
USB Monitor
Driver Program Installation (For Windows OS)
1. Insert the included installation CD.
When the CD is inserted, the driver Installer image will
be displayed
● USB Monitor Driver
● Touch Driver
● Exit
2. Select the‘Touch Driver’ button.
3. After selecting the ‘Touch Driver’ button, the driver package
installation wizard will guide user to install Touchside driver
software package. Click [Next] button to proceed installation.
4. The Installation wizard pops up below dialog to hint user to
check this check box if the PS/2 interface of touchscreen is
going to be used. By default, this check box is unchecked.
Then, press [Next] button to proceed installation.
- When ‘Auto Install’ processing is not activated, click on the
“AutoRun” file on the driver CD for Installation.
- Power or USB cable disconnection, during the process of
installation may cause serious error on the PC or OS system.
Note
Turn on the PC and connect the PC with the device by using the USB cable included with USB sub-monitor
(AT-7). When the device is connected to the PC using USB cables, adequate power will be supplied
to the device.
Touch
11
AT-7 User Guide
Indice
Altri manuali i-MO Monitor
