I-Tech WMRM1500-PCAP Manuale utente
User Manual Contents
- 2 -
- 3 -
- 8 -
CONTENTS
PREFACE
ABOUT THIS USER MANUAL
CHAPTER 1: INTRODUCTION - 10 -
1.1 Product Features.......................................................................- 10 -
1.2 Package Contents.....................................................................- 11 -
1.3 Rear Components .....................................................................- 12 -
1.4 Panel Controls...........................................................................- 13 -
1.5 Dimensions................................................................................- 14 -
CHAPTER 2: INSTALLATION - 18 -
2.1 Wiring Requirements.................................................................- 18 -
2.2 Mounting the Display.................................................................- 19 -
2.2.1 Console/ Rack Mount................................................ - 19 -
2.2.2 VESA Mount ............................................................. - 20 -
2.2 Powering On..............................................................................- 21 -
2.2.1 Connecting to AC Input Power Source (Default)....... - 22 -
2.2.2 Connecting to DC Input Power Source (Optional)..... - 23 -
2.3 Connecting Other Devices.........................................................- 24 -
2.3.1 VGA Connector......................................................... - 24 -
2.3.2 BNC Connector......................................................... - 25 -
2.3.3 DVI-D Connector....................................................... - 25 -
2.3.4 HDMI Connector....................................................... - 26 -
CHAPTER 3: OPERATING THE DEVICE - 28 -
3.1 Navigating the OSD Menu.........................................................- 28 -
3.2 OSD Menu in VGA Mode...........................................................- 29 -
3.3 OSD Menu in DVI Mode............................................................- 32 -
APPENDIX A: TECHNICAL SPECIFICATIONS - 35 -
APPENDIX B: MILITARY GRADE COMPLIANCE - 37 -
APPENDIX C: MAINTENANCE - 39 -
User Manual Preface
- 3 -
PREFACE
Copyright Notice
No part of this document may be reproduced, copied, translated, or
transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their
respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in
order to improve design and/or performance. We assume no responsibility or
liability for the use of the described product(s) conveys no license or title
under any patent, copyright, or masks work rights to these products, and
make no representations or warranties that these products are free from
patent, copyright, or mask work right infringement, unless otherwise specified.
Applications that are described in this manual are for illustration purposes
only. We make no representation or guarantee that such application will be
suitable for the specified use without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material
and workmanship defects for a period of one year from the invoice date. If the
customer discovers a defect, we will, at his/her option, repair or replace the
defective product at no charge to the customer, provide it is returned during
the warranty period of one year, with transportation charges prepaid. The
returned product must be properly packaged in its original packaging to obtain
warranty service. If the serial number and the product shipping data differ by
over 30 days, the in-warranty service will be made according to the shipping
date. In the serial numbers the third and fourth two digits give the year of
manufacture, and the fifth digit means the month (e. g., with A for October, B
for November and C for December).
User Manual Preface
- 4 -
Customer Service
We provide a service guide for any problem by the following steps: First, visit
the website of our distributor to find the update information about the product.
Second, contact with your distributor, sales representative, or our customer
service center for technical support if you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every
business day. We are always ready to give advice on application
requirements or specific information on the installation and operation of any of
our products.
Federal Communications Commission Radio
Frequency Interface Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received
including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a
class "B" digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at him own expense.
.
User Manual Preface
- 5 -
European Union
This equipment is in conformity with the requirement of
the following EU legislations and harmonized
standards. Product also complies with the Council
directions.
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013
User Manual Preface
- 6 -
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful
information or to alert you to the potential for hardware damage or personal injury.
These are Notes, Important, Cautions, and Warnings. The following is an
example of each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to
know.
CAUTION/ ATTENTION!
A Caution alert indicates potential damage to hardware and
explains how to avoid the potential problem.
Unealerted’ attention indique un dommage possible à
l’équipement et explique comment éviter le problem potentiel.
WARNING!/AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from
electrical hazards and how to avoid the potential problem.
Un Avertissement de Choc Électriqueindique le potentiel de
chocssur des emplacements électriques et comment éviterces
problèmes.
ALTERNATING CURRENT / MISE À LE TERRE!
The Protective Conductor Terminal (Earth Ground) symbol
indicates the potential risk of serious electrical shock due to
improper grounding.
Le symbole de Miseà Terre indique le risqué potential de choc
électrique grave à la terre incorrecte.
User Manual Preface
- 7 -
Safety Information
WARNING!
This monitor is equipped with Mini USB port, signals and power is
obtained from standard USB 2.0 or USB 3.0 port. Do not expose
this unit in the rain or moisture environment to damage the
monitor.
CAUTION!
Do not touch the surface of the LCD panel. Pressure on the panel
may cause non-uniformity of color or disorientation of the liquid
crystals.
PRECAUTIONS:
•Do not use the monitor near water.
•Do not place the monitor on an unstable cart, stand, or table. If the monitor
falls, it can injure a person and cause serious damage to the appliance. Use
only a cart or stand recommended by the manufacturer or sold with the
monitor. If you mount the monitor on a wall or shelf, use a mounting kit
approved by the manufacturer and follows the kit instructions.
•The monitor should be operated with an USB cable with Mini USB B type
connector on monitor end and standard USB A type connector on the other
end to PC or USB signal source.
•Normally it is packed with monitor.
•Never spill liquids on the monitor.
•Do not attempt to service the monitor yourself; opening or removing covers
can damage to the monitor or panel. Please refer all servicing to qualified
service personnel.
•For Wall mount adaptor, wall socket shall be installed near the equipment and
shall be easily accessible.
User Manual About This User Manual
- 8 -
ABOUT THIS USER MANUAL
This User Manual provides information about using the 15~32” P-Cap Rack
Mount Display. The documentation set provides information for specific user
needs, and includes:
15~32” P-Cap Rack Mount Display User Manual –contains detailed
description on how to use the display, its components and features.
NOTE:
Some pictures in this guide are samples and can differ from actual
product.
Document Revision History
Version
Date
Note
1.0
5-Mar-2018
New document release
User Manual Chapter 1 Introduction
- 9 -
INTRODUCTION
This chapter gives you product overview,
describes features and hardware
specification. You will find all accessories
that come with the display device in the
packing list. Mechanical dimensions and
drawings included in this chapter.
User Manual Chapter 1 Introduction
- 10 -
CHAPTER 1: INTRODUCTION
15~32” P-Cap Rack Mount Military Display. Military Grade Display features
anti-corrosive coating with aluminum alloy housing withstands the harshest
military environments. Armored power connector MIL-DTL-38999 Type I
initially developed for aerospace industry perfectly fit in our Military grade
product line.
Withstanding rigors of harsh environments and tough weather conditions these
Displays meet the most demanding requirements. Suitable for Army
Headquarters and being connected to mobile devices on the field Display can
provide up-to-date information for immediate commands.
1.1 Product Features
P-Cap Rack Mount Military Display features:
• 15~32” Projected Capacitive (P-Cap) multitouch screen
• Compliant with military standard MIL-STD-810G/F
• Anti-corrosion housing
• Flush and rack mount mechanical design (8U)
• Convenient on-screen display controls
• Built-in light sensor for auto brightness control
• Military grade power connector (MIL-DTL-38999/1)
• Default with Standard AR Glass
• DC 9~36V power input with isolation (Optional)
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali I-Tech Monitor
I-Tech
I-Tech Suntronic GS4600 Manuale utente
I-Tech
I-Tech YPM2000 Manuale utente
I-Tech
I-Tech UltraView iAP600 Manuale utente
I-Tech
I-Tech MTD-1XXX Manuale utente
I-Tech
I-Tech YPM2130-PCAP Manuale utente
I-Tech
I-Tech KKF1040B-TR Manuale utente
I-Tech
I-Tech UltraView iAP1700 Manuale utente
I-Tech
I-Tech DA011 Manuale di istruzioni
I-Tech
I-Tech UltraView iDP1200 Manuale utente
I-Tech
I-Tech HAP-19AV Series Manuale utente
I-Tech
I-Tech UltraView iDP-1000AV Manuale utente
I-Tech
I-Tech NQW819 Manuale utente
I-Tech
I-Tech LCHH1001 Manuale utente
I-Tech
I-Tech HNPW719 Manuale utente
I-Tech
I-Tech UltraView iAP1700 Manuale utente
I-Tech
I-Tech UltraView iDP1900 Manuale utente
I-Tech
I-Tech UltraView iAP17W Manuale utente
I-Tech
I-Tech UltraView iDP600AV Manuale utente
I-Tech
I-Tech HNP819 Manuale utente
I-Tech
I-Tech KK1500-TR Istruzioni per l'installazione e il funzionamento
