IBM System x Education M5000 Series Manuale utente

Thank you for purchasing the ServeRAID M5000 Series

Performance Accelerator Key for System x®. The

ServeRAID M5000 Series Performance Accelerator Key

enables support for the following features:

– RAID 6 configurations

– RAID 60 configurations

– CacheCade™

– FastPath™

– Recovery™

– SafeStore™ Encryption Services

on the following ServeRAID SAS/SATA controllers:

– ServeRAID M5014 SAS/SATA controller

– ServeRAID M5015 SAS/SATA controller

– ServeRAID M5025 SAS/SATA controller

Figure 1 shows the ServeRAID M5000 Series Performance

Accelerator Key. The ServeRAID M5000 Series

Performance Accelerator Key mounts directly to the

controller using the J1 2-pin connector.

Figure 1 ServeRAID M5000 Series Performance

Accelerator Key

Please take a few minutes to read this Quick Install Guide.

If you need more information about any topic covered in this

guide, refer to the documents on your ServeRAID M

Documentation CD.

INSTALLING THE SERVERAID M5000

SERIES PERFORMANCE ACCELERATOR

KEY ON THE SERVERAID M5014/M5015

SAS/SATA CONTROLLERS

Perform the following steps to install the ServeRAID M5000

Series Performance Accelerator Key directly to the

ServeRAID M5014/M5015 SAS/SATA controllers.

1. Turn off the computer and unplug the power cords from

the rear of the power supply.

2. Remove the cover from the computer according to the

instructions in the system user’s manual so you can

access the controller.

Note:When handling static sensitive devices, take

precautions to avoid damage from static

electricity.

3. Ground yourself before you touch the controller or the

key.

4. Remove the key from the package.

5. Hold the key so that the J1 connector is facing upward

and the connector lines up with the JT8 header on the

controller, as shown in Figure 2.

6. Insert the J1 connector into the JT8 header so that the

two connectors are firmly joined.

Figure 2 Installing the ServeRAID M5000 Series

Performance Accelerator Key on the

ServeRAID M5014/M5015 SAS/SATA

Controllers

7. Reinstall the computer cover and reconnect the power

cords.

Attention: It is important to back up any data before you

make a change in system configuration. Failure

to do this could result in data loss.

85060-00

ServeRAID M5000 Series

PerformanceAccelerator Key

for System x

Quick Install Guide

IBM P/N: 60Y0041

First Edition (October 2010)

US Government Users Restricted Rights – Use, duplication or disclosure restricted

by GSA ADP Schedule Contract with IBM Corp.

IBM, the IBM logo, and System x are trademarks or registered trademarks of

International Business Machines Corporation in the United States, other countries,

or both.

LSI and the LSI logo design are trademarks or registered trademarks of LSI

Corporation. All other brand and product names may be trademarks of their

respective companies.

8. Turn on the power to the computer, making sure that

the power is turned on to the SAS devices and the

SATA II devices before or at the same time as the host

computer. If the power is turned on to the computer

before it is turned on to the devices, the computer might

not recognize the devices.

INSTALLING THE SERVERAID M5000

SERIES PERFORMANCE ACCELERATOR

KEY ON THE SERVERAID M5025 SAS/

SATA CONTROLLER

Perform the following steps to install the ServeRAID M5000

Series Performance Accelerator Key directly to the

ServeRAID M5025 SAS/SATA controller.

Step 1 Turn off the computer and unplug the power

cords from the rear of the power supply.

Step 2 Remove the cover from the computer according

to the instructions in the system user’s manual so

you can access the controller.

Step 3 Ground yourself before you touch the controller

or the key.

Step 4 Remove the key from the package.

Step 5 Hold the key so that the J1 connector is up and

the connector lines up with the J1A2 shielded

header on the controller, as shown in Figure 3.

Step 6 Insert the J1 connector into the J1A2 header so

that the two connectors are firmly joined.

Figure 3 Installing the ServeRAID M5000 Series

Performance Accelerator Key on the

ServeRAID M5025 SAS/SATA Controller

Step 7 Reinstall the computer cover and reconnect the

power cords.

Step 8 Turn on the power to the computer, making sure

that the power is turned on to the SAS devices

and the SATA II devices before or at the same

time as the host computer. If the power is turned

on to the computer before it is turned on to the

devices, the computer might not recognize the

devices.

TECHNICAL SUPPORT

Refer to the Important Notices document for information

about the technical support available for this product.

Attention: When handling static sensitive devices, take

precautions to avoid damage from static

electricity.

85048-15

Altri manuali per System x Education M5000 Series

Altri manuali IBM Hardware per computer

IBM

IBM 09N4076 Manuale utente

IBM

IBM eserver 7210 Manuale

IBM

IBM 3270 Manuale utente

IBM

IBM QLogic 4Gb Fibre Channel Expansion Card Manuale utente

IBM

IBM PowerPC 604 Manuale utente

IBM

IBM PPC440X5 CPU Core Manuale utente

IBM

IBM 5280 Manuale

IBM

IBM Redbooks 2/4 Port Ethernet Expansion Card Manuale utente

IBM

IBM 9125-F2C Manuale utente

IBM

IBM 4764 Manuale utente

IBM

IBM LS42 - BladeCenter - 7902 Manuale utente

IBM

IBM 3290 T Manuale di istruzioni

IBM

IBM 1620 1 Manuale utente

IBM

IBM Power Systems 9223-22S Manuale utente

IBM

IBM WD1003-WA2 Manuale utente

IBM

IBM SAN Volume Controller 2145-CF8 Manuale

IBM

IBM 3745 Series Manuale di istruzioni

IBM

IBM 0367 Manuale utente

IBM

IBM TSO/E REXX Manuale utente

IBM

IBM eserver 225 Series Manuale utente

IBM

IBM Netfinity FASt T500 Manuale di servizio

IBM

IBM M791 Series Manuale utente

IBM

IBM 55PUS8118 SCSI-2 Manuale utente

IBM

IBM System x3630 M4 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente