IBM DU3 2104 Manuale
Expandable Storage Plus
2104 Model s DU3 and TU3
Hardware Technical Information
SA33-3309-00
Expandable Storage Plus
2104 Model s DU3 and TU3
Hardware Technical Information
SA33-3309-00
First Edition (October 2000)
The following paragraph does not apply to any country where such provisions are inconsistent with local law:
THIS PUBLICATION IS PRINTED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions;
therefore, this statement may not apply to you.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in new editions of the publication.
It is possible that this publication may contain reference to, or information about, products (machines and programs),
programming, or services that are not announced in your country. Such references or information must not be
construed to mean that such products, programming, or services will be offered in your country. Any reference to a
licensed program in this publication is not intended to state or imply that you can use only the licensed program
indicated. You can use any functionally equivalent program instead.
© Copyright International Business Machines Corporation, 2000. All rights reserved.
Note to U.S. Government Users – Documentation related to restricted rights – Use, duplication, or disclosure is subject
to restrictions set forth in the GSA ADP Schedule Contract.
Contents
About This Book .......................v
Related Publications ......................v
Trademarks ........................v
Chapter 1. Introduction .....................1
2104 Model DU3 .......................2
2104 Model TU3........................4
SCSI Disk Drive Modules.....................6
SCSI Interface Cards ......................7
Fan-and-Power-Supply Assemblies .................8
Switch Card .........................9
SCSI Bus Bridge Card .....................10
SCSI Bus Configurations ...................10
Chapter 2. Product Characteristics ................13
Dimensions .........................13
Weight ..........................13
Service Clearances ......................13
Environment ........................14
Temperature and Humidity ...................14
Altitude .........................14
Heat Output, Airflow, and Cooling .................15
Electrical Power .......................16
Input-voltage Requirements ..................16
Power Input ........................16
Power Factor .......................17
Output Protection ......................17
Early Power-Off Warning (EPOW) ................17
Power Control ........................18
Power Sequencing .....................18
Auto Restart .......................18
Safety Approvals .......................19
Electromagnetic Compatibility ...................20
Federal Communications Commission (FCC) Statement .........20
Japanese Voluntary Control Council for Interference (VCCI) Statement ....20
Korean Government Ministry of Communication (MOC) Statement......20
New Zealand Compliance Statement ...............20
International Electrotechnical Commission (IEC) Statement ........20
Avis de conformitéàla réglementation d’Industrie Canada ........20
Industry Canada Compliance Statement ..............21
United Kingdom Telecommunications Requirements ..........21
European Union (EU) Statement .................21
Radio Protection for Germany ..................21
Taiwan Class A Compliance Statement ...............22
Chapter 3. Physical Connections .................23
SCSI Adapters and Cables ....................25
iii
Mainline-Power Connectors ...................26
iv 2104 Models DU3 and TU3 Hardware Technical Information
About This Book
This book is intended for system designers, programmers, engineers, and other
professionals who need to understand the 2104 Models DU3 and TU3.
Chapter 1 contains an introduction and general information about the components of
the 2104 Models DU3 and TU3.
Chapter 2 contains a summary of the physical characteristics of the 2104 Models DU3
and TU3.
Chapter 3 contains information about the external connectors of the 2104 Models DU3
and TU3.
Related Publications
ANSI
1
specification SCSI/2 X3T9.2/86-109 revision 10H
ANSI specification X3.131-199X
Site and Hardware Planning Information, SA38-0508
Adapters, Devices, and Cables Information for Multiple Bus Systems, SA38-0516
Expandable Storage Plus : 2104 Models DU3 and TU3 Operator’s Guide,
SA33-3310
Expandable Storage Plus : 2104 Model DU3 Installation Guide, GA33-3311
Expandable Storage Plus : 2104 Model TU3 Installation Guide, GA33-3312
Expandable Storage Plus : 2104 Models DU3 and TU3 Service Guide, GY33-0198
Trademarks The following items are trademarks of International Business Machines Corporation in
the United States, or other countries, or both:
vAIX
vIBM
vRS/6000
v
TM
1. American National Standards Institute.
v
vi 2104 Models DU3 and TU3 Hardware Technical Information
Chapter 1. Introduction
This section describes the 2104 Models DU3 and TU3 and their components.
Figure 1. 2104 Model TU3 (on the Left) and 2104 Model DU3 (on the Right)
1
2104 Model DU3
The 2104 Model DU3 is a rack-mounted SCSI disk enclosure that can be attached to
any RS/6000 or IBM
™
server
TM
™
pSeries computer that provides support for any of
the Small Computer System Interface (SCSI) adapters listed in “SCSI Adapters and
Cables”on page 25.
A fully configured 2104 Model DU3 looks like this:
At the front of a 2104 Model DU3 there are 14 device slots 1. In a fully configured
2104 Model DU3, each slot contains a SCSI disk drive module. If a 2104 Model DU3 is
not fully configured, each slot that does not contain a SCSI disk drive module must
contain a dummy module.
Note: At least one SCSI disk drive module must be present in each 2104 Model DU3.
Each disk drive module connects to a backplane that is mounted vertically about
halfway between the front and back of the 2104 Model DU3.
The 14 device slots are divided into two groups of seven slots. Between the two groups
of slots there is a SCSI bus bridge card 2. The SCSI bus bridge card assigns the disk
drive modules to a SCSI bus, in accordance with the setting of the SCSI bus split
switch on the switch card.
Figure 2. 2104 Model DU3 from the Front (Top) and Back (Bottom)
22104 Models DU3 and TU3 Hardware Technical Information
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali IBM Hardware di rete
IBM
IBM GX5008C-ROHS Guida
IBM
IBM EtherLink XL Manuale utente
IBM
IBM System Storage N3700 Manuale utente
IBM
IBM 8271 F12 Manuale utente
IBM
IBM 7063-CR2 Manuale utente
IBM
IBM TotalStorage DS300 Manuale utente
IBM
IBM 39Y9314 Manuale
IBM
IBM 360 Manuale utente
IBM
IBM 16/4 Token Ring PCI Special NIC Istruzioni utente
IBM
IBM 3192-G Manuale
IBM
IBM 16/4 Token Ring PCI Special NIC Istruzioni utente
IBM
IBM Gigabit Fibre Channel PCI Adapter 4-S Guida
IBM
IBM 8852 - BladeCenter H Rack-mountable Manuale utente
IBM
IBM NEXUS 5000 - OVERVIEW 19-10-2010 Manuale utente
IBM
IBM Nways 2216 Manuale di installazione e d'uso
IBM
IBM System storage DS6000 Series Manuale tecnico
IBM
IBM 8687-3RY Manuale utente
IBM
IBM Proventia MX3006 Manuale utente
IBM
IBM ioMemory VSL 3.2.6 Manuale
IBM
IBM 8677 - BladeCenter Rack-mountable - Power... Manuale tecnico
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
