IBM LB20 Manuale utente
Basic Purpose Printer
LB20
User’s Guide
Part number: EK-LB20A-UG.001
ACKNOWLEDGMENT
IBM, PC, XT, AT, PS/2, Proprinter and 4722 are
registered trademarks of International Business
Machines Corporation
MS-DOS, Windows 3.1x, Windows 95 and
WindowsNT are trademarks of Microsoft
Corporation.
A publication of:
DIGITAL EQUIPMENT BCFI AB
P.O. Box 904
S-175 29 Järfälla, Sweden
Printed in Sweden, March, 1997
© Digital Equipment Corporation, 1997.
All rights reserved
The information in this document is subject to change
without notice and should not be construed as a
commitment by Digital Equipment Corporation.
Digital Equipment Corporation assumes no
responsibility for any error which may appear in this
document.
Digital conducts its business in a manner that
conserves the environment and protects the safety and
health of its employees, customers, and the
community.
Digital, the Digital logo, DECbank and FBS are
trademarks of Digital Equipment Corporation.
Part number: EK-LB20A-UG.001
CONTENTS
1 INTRODUCTION 1-1
1.1 Scope 1-1
1.2 Related Documentation 1-1
1.3 Order Process 1-2
1.4 Warnings, Cautions and Notes 1-2
1.5 Manufacturers Declaration 1-3
2 INSTALLATION 2-1
2.1 Preparation 2-1
2.2 Operating Space 2-2
2.3 Removal of transport locks 2-3
2.4 Trapdoor, Lid and Document Guide 2-4
2.5 Connections and Settings 2-5
2.6 Ink Ribbon Cassette 2-6
2.6.1 Power On 2-6
2.6.2 Unpacking the Ink Ribbon Cassette 2-7
2.6.3 Centering the Skid 2-7
2.6.4 Raising the Carrier 2-8
2.6.5 Positioning the Ink Ribbon Cassette 2-8
2.6.6 Installing the Ink Ribbon Cassette 2-9
2.6.7 Installing the Skid 2-9
2.6.8 Removing Slack Ribbon 2-10
2.6.9 Ready to Print 2-10
3 SETUP 3-1
3.1 Introduction 3-1
3.1.1 Setup Functions 3-1
3.1.2 Setup Controls 3-2
3.1.3 Menu’s and Parameters 3-2
3.1.4 Changing or Viewing the Setup 3-3
3.2 Setup Example 3-4
3.2.1 Entering Setup 3-5
3.2.2 Loading a Document 3-6
3.2.3 Moving to VIEW or a Menu 3-7
3.2.4 Printing the Current Settings 3-8
3.2.5 Changing a Setting 3-8
3.2.6 Validating 3-9
3.2.7 Quitting 3-9
3.3 Setup Check 3-9
3.4 Performing a Setup 3-10
3.4.1 COM Menu 3-10
3.4.2 IBM Menu 3-10
3.4.3 DOC Menu 3-12
3.4.4 <>DFT Menu 3-18
3.4.5 <>HQD Menu 3-18
4 OPERATION 4-1
4.1 Controls and Indications 4-1
4.1.1 Confidence Test Routine 4-2
4.2 Documents 4-2
4.2.1 New Pages 4-2
4.2.2 Loading a Document 4-3
4.2.3 Stop while printing 4-4
4.2.4 Clearing Document Jams 4-4
5 MAINTENANCE 5-1
5.1 Ink Ribbon Cassette 5-2
5.1.1 Centering the Skid 5-2
5.1.2 Raising the Carrier 5-3
5.1.3 Removing the Skid 5-3
5.1.4 Removing the Old Ink Ribbon Cassette 5-4
5.1.5 Cleaning 5-4
5.1.6 Unpacking the New Ink Ribbon Cassette 5-4
5.1.7 Positioning the New Ink Ribbon Cassette 5-5
5.1.8 Installing the New Ink Ribbon Cassette 5-5
5.1.9 Reinstalling the Skid 5-6
5.1.10 Removing Slack Ribbon 5-6
5.2 Mylar Cassette 5-7
5.2.1 Centering the Skid 5-7
5.2.2 Raising the Carrier 5-8
5.2.3 Removing the Mylar Cassette 5-8
5.2.4 Inspecting the Mylar Edges (Bottom View) 5-9
5.2.5 Checking for Free Movement (Top View) 5-10
5.2.6 Reinstalling the Mylar Cassette 5-10
5.2.7 Positioning the Slider 5-11
5.3 Printhead 5-12
5.3.1 Preparation 5-12
5.3.2 Removing the Trapdoor 5-13
5.3.3 Releasing the Printhead 5-13
5.3.4 Lowering the Carrier 5-14
5.3.5 Removing the Printhead 5-14
5.3.6Reinstalling the Printhead 5-15
5.4 Cleaning of Edge Detection Sensor and Mylar Slide Hole 5-16
5.5 Cleaning the Feed Rollers 5-17
5.6 Ready to Print 5-18
6 SPECIFICATIONS 6-1
6.1 Printer Characteristics 6-1
6.2 Serial Interface - RS232C 6-2
6.2.1 Configurable Parameters 6-2
6.2.2 Serial Connector 6-2
6.2.3 Handshaking 6-3
6.3 Parallel Interface - Centronics 6-4
6.4 Documents 6-5
6.4.1 Recommendations and Restrictions 6-7
6.4.2 Passbook Thickness 6-7
6.4.3 Center Outfold Bulge 6-8
6.4.4 Passbook Squareness 6-8
7 GLOSSARY 7-1
Introduction 1-1
1 INTRODUCTION
The LB20 Printer is delivered as one of the following:
• 9 pin dot matrix Serial printer (Model: LB20A-AA)
OR
• 9 pin dot matrix Parallel printer (Model: LB20B-AA)
When installed the printer forms an integrated part of a User’s Information System
and provides a printing function in IBM ProprinterIII emulation for the following
types of document:
• Passbooks - vertical or horizontal seam
• Envelopes
• Forms
The printer is simple to install, operate and maintain and provides a guaranteed
Print Quality for documents of thickness 0.0787 in (2 mm) or less.
1.1 Scope
This User Guide contains the following chapters:
• Introduction
• Installation
• Setup
• Operation
• Maintenance
• Specifications
• Glossary
1.2 Related Documentation
• Programmers Reference Guide (EK-LB20A-RG)
• Field Support Manual (EK-LB20A-SM)
• Spare Part Guide (EK-LB20A-PG)
Introduction 1-2
1.3 Order Process
Documentation, Accessories and Spare Parts shall be ordered from:
Digital Equipment BCFI AB, Attn. Orderdesk
P.O.Box 904
175 29 Järfälla, Sweden
Telephone: +46 8 759 4600
Facsimile: +46 8 621 1718
1.4 Warnings, Cautions and Notes
WARNING!
This type of safety instruction is used where there is a danger of injury to persons
and/or damage to the equipment or the environment. The symbol inside the triangle
indicates type of danger.
CAUTION!
This type of safety instruction is used where danger of injury to persons and/or
damage to the equipment or the environment can occur, if the instruction is not
followed.
NOTE!
Notes are used to provide important or explanatory information.
Introduction 1-3
1.5 Manufacturers Declaration
Document Number: S960242-1
This is to certify that the Digital Equipment BCFI AB, product indicated below
complies with the requirements on the EEC-Directives and/or other Standards as
indicated below and has been officially released for normal delivery to customers
and equipped with the CE-mark.
PRODUCT DESCRIPTION: Terminal Printer
DIGITAL MODEL NUMBER: LB20A-AA, LB20B-AA
This certificate is a confirmation of full compliance with the following regulations:
EEC-directive 89/336/EEC: "Electromagnetic Compatibility"
*EN 50081-1 (Emission EN 55022/1985)
*EN 50082-1 (Emission IEC 801-2, -3, -4)
EEC-Low Voltage Directive (LVD) 73/23/EEC of February 19, 1973
"Safety of Information technology equipment including electrical business
equipment"
*EN60950, 1992 + A1 + A2 + A3
Järfälla, 1996-12-19
Lars-Erik Högquist
Product Safety Manager
Installation 2-1
2 INSTALLATION
Perform the actions described and illustrated under the headings:
2.1 Preparation
Open the packing carton at one end, pull out the two foam sections and unpack the
following:
1. Mains Power Cable
2. Printer
3. User’s Guide
4. Ribbon Cartridge Box
5. Document Guide
6. Trapdoor
Note: If possible store the packing carton for future use
WARNING !
Make sure that the mains outlet connector in the building is a
Class-1 outlet with protective earth, easily accessible and the fuse
in the building protects against earth fault.
Installation 2-2
2.2 Operating Space
Place the printer on a flat, horizontal surface in a clear area as follows:
1. Back - 8in (203 mm) for document removal.
2. Sides - 4in (101mm) for air cooling.
3. Front - 10in (254 mm)for document loading.
Note: If necessary, allow further space for power and communication cable routing.
2
3
1
Indice
Altri manuali IBM Stampante
IBM
IBM 4332-004 - InfoPrint 40 B/W Laser Printer Manuale utente
IBM
IBM 6400 Series Manuale utente
IBM
IBM 1220 Manuale di servizio
IBM
IBM Infoprint 1422 Manuale utente
IBM
IBM 6400 Series Manuale utente
IBM
IBM Network Color Printer Manuale di servizio
IBM
IBM InfoPrint 1585n Manuale utente
IBM
IBM 5225 1 Manuale
IBM
IBM 17 S544-5343-03 Manuale utente
IBM
IBM INFOPRINT 1116 Manuale di servizio
IBM
IBM 3852-2 Guida all'applicazione
IBM
IBM 6400 - Model 008 B/W Line-matrix Printer Manuale
IBM
IBM 1352 - InfoPrint B/W Laser Printer Manuale utente
IBM
IBM 1585 (MT 4539) Manuale utente
IBM
IBM 6400 Series Istruzioni originali
IBM
IBM InfoPrint 1532 Express Manuale utente
IBM
IBM INFOPRINT COLOUR 1767 Manuale utente
IBM
IBM 4247 - Model 001 B/W Dot-matrix Printer Manuale utente
IBM
IBM InfoPrint 1634 Manuale utente
IBM
IBM 6400 Series Manuale utente
