ICI FM PLUS P Series Manuale utente
FM PLUS P SERIES IR CAMERA
USER MANUAL
PLEASE READ THIS MANUAL BEFORE SWITCHING THE UNIT ON.
IMPORTANT SAFETY INFORMATION INSIDE.
2105 W. Cardinal Dr. Beaumont, TX 77705
ICI cameras fall under US Federal Law and Export Control.
THIS DEVICE IS INTENDED FOR ADJUNCTIVE USE WITH OTHER CLINICAL DIAGNOSTIC
PROCEDURES
MEASUREMENTS VISUALIZED FROM THE HUMAN FACE. NOT MEANT FOR STANDALONE
CLINICAL DIAGNOSTIC PROCEDURES OR TO TREAT OR DIAGNOSE PATIENTS.
MedicalMedical
Edit Text Outlines
FM PLUS P SERIES IR CAMERA USER MANUAL
2
©Copyright 2021, Infrared Cameras, Inc. - All rights reserved. The
contents of this document may not be reproduced in whole or in parts
without the written consent of the copyright owner.
Printed in the United States of America.
2105 W. Cardinal Dr.
Beaumont, TX 77705
(866) 861-0788
www.infraredcameras.com
THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE
SPECIFICATIONS OF THE PRODUCT WITHOUT PRIOR NOTIFICATION. THE
MANUFACTURER ALLOWS HIMSELF THE RIGHT TO MODIFY WITHOUT
ANY PRELIMINARY OPINION THE TECHNICAL SPECIFICATIONS OF THE
PRODUCT. THIS MANUAL MAY CONTAIN TECHNICAL INACCURACIES OR
TYPOGRAPHICAL ERRORS.
NOTICE ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN
THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED
WITHOUT WARRANTY OF ANY KIND. NOTWITHSTANDING ANY OTHER
WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE ARE
PROVIDED “AS IS” WITH ALL FAULTS. ICI DISCLAIMS ALL WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE,
OR TRADE PRACTICE.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE
ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION
PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED
HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE
SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR ICI
REPRESENTATIVE FOR A COPY.
IN NO EVENT SHALL ICI BE LIABLE FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING
OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF ICI HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
FM PLUS P SERIES IR CAMERA USER MANUAL
3
1. General Description
2. Safety Information
3. Intended Use
4. Technical Specifications
5. Structure
6. Package Contents
7. Installation Instructions
8. Computer Setup
9. Cleaning and Maintenance
10. Site and System Validation Checklist
11. Troubleshooting
12. About ICI
Contents
4
4
4
5
6
7
8
13
16
17
18
22
FM PLUS P SERIES IR CAMERA USER MANUAL
4
1. General Description
FM Plus Series IR cameras are specially designed to take the body temperature
of a person and to report the total number of persons scanned. Depending on
various skin types and thickness, there may be temperature differences. The
system is designed and most used for adjunctive temperature screening.
2. Safety Information
• This device must be installed by qualified service personnel or system installation
personnel.
• Do take precautions to prevent the lens from being worn, scratched or broken. Avoid
touching the lens to prevent it from being damaged or getting dirty.
• Given that the uncooled thermal infrared image camera uses a very sensitive thermal
sensor, under no circumstances (powered on or off) should the lens be pointed directly
at a strong radiation source (such as sun, direct or reflected laser beam, etc.), otherwise
permanent damage will be caused to the uncooled thermal imager.
• This product is a precise electronic device that must be handled with care during use,
storage, and transportation to prevent dangerous actions such as the device being hit
by external force, or falling from heights.
• During transportation and storage the original packaging box must be used.
• Prior to start of the device, make sure that the power supply is properly connected. If
the power supply is connected incorrectly, the device may be damaged.
• Do not place any objects on the power cord, and do not place the device where the
power cord can be easily touched.
• Do not submerge the device in water. Protect the device from heavy seas and projecting
jets of water. Rated for environments of 5% to 95% non-condensing humidity.
• Do not drop or throw the device.
• Do not put the product into a fire.
• It is recommended to calibrate the device(s) annually.
• If the device operates abnormally, please contact the supplier and do not dismantle the
device on your own.
3. Intended Use
FM Plus Series IR Cameras are used as an adjunct to other clinical diagnostic procedures
for elevated body temperature screening based on the skin surface temperature visualized
from the human face.
Patient population: All age groups
Environment of use: hospitals, sub-acute healthcare settings, public areas, i.e., airports.
FM PLUS P SERIES IR CAMERA USER MANUAL
5
4. Technical Specifications
Detector Array UFPA
FOV 20° x 17° 34° x 26°
Measurement Distance Lens dependent
384 x 288
< (50 mK) 0.05 °C at 30 °C (86°F)
50 Hz 30 Hz
H 264
20 °C to 50 °C (68 °F to 122 °F)
0 °C to 50 °C (32 °F to 122 °F)
-40 °C to 60 °C (-40 °F to 140 °F)
5% to 95% non-condensing
Accuracy ± 0.3 °C (0.54°F)
> 99 %
232 mm x 145 mm x 85 mm (L x W x H ± 0.5 mm)
(9.13” x 5.71” x 3.35” (L x W x H ± 0.02”))
12 V DC 1 A, < 15 Watts
< 1220 g (2.69 lbs)
Interface RJ-45 Ethernet
H.264 for IR and Visible
0.01 to 1.0
IP 54
Built-in shutter
1920 x 1080
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
FM PLUS P SERIES IR CAMERA USER MANUAL
6
1.
2.
1. RS485 output - reserved
2. COM port - reserved
3. CVBS_OUT output - reserved
4. DC 12V power supply
5.
3.
4.
5.
5. Structure
FM PLUS P SERIES IR CAMERA USER MANUAL
7
6. Package Contents
ENSURE ALL SYSTEM EQUIPMENT AND COMPONENT ITEMS ARE
PRESENT BEFORE BEGINNING INSTALLATION
Temperature Reference
Ethernet Cable
FM Series IR Camera
Power Cord x2
Software USB Drive
Power Adapter
FM PLUS P SERIES IR CAMERA USER MANUAL
8
7. Installation Instructions
SELECT AN APPROPRIATE AREA FREE OF IMMEDIATE AIRFLOW
FROM DOORWAYS AND AIR CONDITIONING/VENTILATION
SYSTEMS. THE SELECTED AREA SHOULD HAVE A STABLE
A. B.
Mount the Temperature Reference to a
tripod using the ¼-20 mount.
Plug power cord into Temperature Reference.
FM PLUS P SERIES IR CAMERA USER MANUAL
9
D.
Mount the FM+ Series IR Camera to a
tripod using the ¼-20 mount.
C.
Plug power cord into a
110/120V electrical outlet.
FM PLUS P SERIES IR CAMERA USER MANUAL
10
E. F.
Plug one end of the Ethernet
cable into the FM+ Series IR
Camera Ethernet port cable.
Plug the other end of the Ethernet
cable into a computer Ethernet port.
G. H.
Plug power cord into the
power adapter.
Plug the power adapter into FM+
Series IR Camera barrel connector.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali ICI Telecamera IP
ICI
ICI FM 384 P Series Manuale utente
ICI
ICI 9320 Series Manuale utente
ICI
ICI 8000 Series Manuale utente
ICI
ICI SOUND DETECTAI Manuale utente
ICI
ICI FMX 400 P Series Manuale utente
ICI
ICI FM 384 P Series Manuale utente
ICI
ICI T-CAM 160 XT P Series Manuale utente
ICI
ICI FMX 320 Series Manuale utente
ICI
ICI GAS DETECTIR Series Manuale utente
