ICM Controls SC2201 Istruzioni generali
Manual Changeover
Non-Programmable
Hardwired
SC 2201
Non-Programmable Electronic Thermostat
Installation, Operation & Application Guide
For more information on our complete range of American-made
products – plus wiring diagrams, troubleshooting tips and more,
visit us at www.icmcontrols.com
• For use with Heat Pumps
• Up to 2-Stage Heat, 2-Stage Cool
• 30-Minute Power Loss Memory Retention
• For use with 24 VAC Systems
Table of Contents
CAUTION!
:
Thisthermostatshouldbeinstalledbytrainedtechniciansonly.Adheretoalllocaland
nationalcodes.Disconnectallpowertothesystembeforeinstalling,removing,orcleaning.
PartsDiagram........................................................ 1
Specications........................................................ 2
Features/Benets.................................................. 2
PackageContents/ToolsRequired........................ 2
ImportantSafetyInformation................................. 3
GeneralDescription............................................... 2
ToRemoveExistingThermostat............................ 4
ReplacingWiringLabels........................................ 4
ToInstallThermostat............................................. 5
TestingtheThermostat.......................................... 6
LEDIndicators....................................................... 8
Operation...............................................................9
WiringDiagrams.................................................. 11
CarrierSplitStreamCondensers........................................... 11
Coleman3000Series............................................................12
ComfortmakerCYCSeries....................................................13
Heil-Quaker867.814SeriesandPH50Series...................... 14
PayneReliantandEnduraModel..........................................15
Rheem/Ruud: -PGB,-PFA,-PCB,
-PLA,and-PKASeries.................................16
Goodman,Janitrol,Trane/AmericanStandard......................17
York-E1CS,-E1FB,E1FH.....................................................18
LennoxCB19 ......................................................................19
LennoxHP19andHP20........................................................20
LennoxHP21withCB21PCB...............................................21
LennoxHP22withCB19PCB...............................................22
FHP1Stage..........................................................................23
FHP2Stage..........................................................................24
Troubleshooting................................................... 25
1
Parts Diagram
2
Specifications
Input:
• Voltage:24VAC(18-30VAC)
Output:
• Maximum:1ampmaximumloadperterminal
(4amptotalmaximumloadforallterminals)
Temperature Ranges:
• Temperature control range: 45°Fto90°F(7°Cto32°C)Accuracy:±1°F(±0.5°C)
• Differential range: 1°Fto3°F(0.5°Cto1.5°C)
System configurations:Multi-stageheatpump(two-stageheat,two-stagecool)
Terminations:R,C,E,Y1,Y2,O,B,G,L,W2
Second stage activation in heat mode:2°belowrststage(notadjustable)
Second stage activation in cool mode:2°aboverststage(notadjustable)
SET
ROOM
DIFF
Temperature
differentialsetting
Roomtemperature
Roomtemperature
setpoint
Package Contents/Tools Required
Package includes: SimpleComfort®2201non-programmablethermostatonbase,thermostatcover,wiringlabels,
screwsandwallanchors,Installation,OperationandApplicationGuide.
Tools required for installation:Drillwith3/16”bit,hammer,screwdriver.
Features/Benefits
• Multi-stageheating/coolingcontrol
• Multi-coloredLEDindicatorsforsystemstatus
• Zonesystemcompatibleasamasterthermostat
• Fahrenheitdisplayandoperationcanbechanged
toCelsius
• Adjustabletemperaturedifferential: 1°Fto3°F
(0.5°Cto1.5°C)
• Automaticheatingsystemshutdowniftemperature
exceeds90°F(32°C)
• 30-minutepowerinterruptionmemoryretention
• Resetbuttonfordifferentialtemperatureadjustment
• Independentsetpointsforheatandcool
3
Important Safety Information
General Description
TheSimpleComfort®2201isintendedtooperateandiscompatiblewith24VACresidentialheatpumpswithupto
2-stageheat/2-stagecool.Itwilloperatewithmulti-stageheatpumpsystemsthataremanualchangeoverandhave
auxiliaryoremergencyheating.Therearenooptionalitemsrequiredforstandardinstallations.Thisthermostatisalso
compatibleasamasterthermostatinzonedsystemapplications.
TheSimpleComfort®2201willautomaticallycontroltheheatand/orairconditioningsystem.Whenusedproperly,this
thermostatcanreduceheatingandcoolingcoststhroughouttheyear.
• Alwaysturnoffpoweratthemainpowersourcebyunscrewingfuseorswitchingcircuitbreakertotheoffposition
beforeinstalling,removing,cleaning,orservicingthisthermostat
• Readalloftheinformationinthismanualbeforeinstallingthisthermostat
• Thisthermostatshouldbeinstalledonlybyaprofessionalcontractor
• Thisisa24VAClow-voltagethermostat;donotinstallonvoltageshigherthan30VAC
• Allwiringmustconformtolocalandnationalbuildingandelectricalcodesandordinances
• Donotswitchsystemtocooliftheoutdoortemperatureisbelow50°F(10°C);thiscandamagetheairconditioning
systemandmaycausepersonalinjury
• Thethermostatwillnotcontrolyourheating/airconditioningsystemwithoutpower;itrequiresacontinuous24VAC
circuitforpropersystemcontrol
• Usethisthermostatonlyasdescribedinthismanual
• Whilecleaning,donotgetsoapdirectlyonthermostatswitchesorLCDreadout;onlyusea
dampclothwithamildsoaptowipeoutsideofthermostatcover
4
ELECTRICAL SHOCK HAZARD – Turn off power at the main service panel by removing the fuse
or switching the appropriate circuit breaker to the Off position before removing the existing
thermostat.
1. Turnoffpowertotheheatingandcoolingsystembyremovingthefuseorswitchingofftheappropriatecircuit
breaker.
2. Removecoverofoldthermostat.Thisshouldexposethewires.
3. Label the existing wires with the enclosed wire labels before removing wires.Seetablebelowforoldand
newlabelidentication.
4. Afterlabelingwires,removewiresfromwireterminals.
5. Removeexistingthermostatbasefromwall.
6. Refertothefollowingsectionforinstructionsonhowtoinstallthisthermostat.
Replacetheoldlabelswiththeenclosednewlabels:
Old New Type
R,V-VRorVR-R R 24VAC,return
Y,Y1orM Y1 Stage1cooling/heatingcircuit
OorR O Reversingvalve(coolingmode)
B B Reversingvalve(heatmode)
GorF G Fancontactorcircuit
Y2 Y2 2ndstagecoolingcircuit
W1,W2orW-U W2 2ndstageheatingcircuit
LorX L SystemmonitorLED
E E Emergencyheatingcircuit
C,XorB C 24VAC,transformercommonside
Replacing Wiring Labels
To Remove Existing Thermostat
5
ELECTRICAL SHOCK HAZARD – Turn off power at the main service panel by removing the fuse
or switching the appropriate circuit breaker to the Off position before removing the existing
thermostat.
IMPORTANT: Thermostatinstallationmustconformtolocalandnationalbuildingandelectricalcodesand
ordinances.
IMPORTANT: Thisthermostatiscompatiblewith100%lockoutsystems.Toresetthesystem,turnthermostat
toOffpositionforatleast60seconds.
Note:
Mountthethermostataboutvefeetabovetheoor.Donotmountthethermostatonanoutsidewall,
indirectsunlight,behindadoor,orinanareaaffectedbyaventorduct.
1. Turnoffpowertotheheatingandcoolingsystembyremovingthefuseorswitchingofftheappropriatecircuit
breaker.
2. PutMode switchinOffposition.
3. PutFan switchinAutoposition.
4. Toremovecover,insertandtwistacoinorscrewdriver
intheslotsonthesidesofthethermostat.
5. Putthermostatbaseagainstthewallwhereyouplantomountit(Besurewireswillfeedthroughthewireopening
inthebaseofthethermostat).
6. Marktheplacementofthemountingholes.
7. Setthermostatbaseandcoverawayfromworkingarea.
8. Usinga3/16”drillbit,drillholesintheplacesyouhavemarkedformounting.
9. Useahammertotapsuppliedanchorsinmountingholes.
10. Alignthermostatbasewithmountingholesandfeedthecontrolwiresthroughwireopening.
11. Usesuppliedscrewstomountthermostatbasetowall.
Cool Off Heat Emer Auto On
Mode Fan
To Install Thermostat
6
12. Insertstripped,labeledwiresinmatchingwireterminals.SeeWiringDiagramssectionofthismanual(Pages11-
24).
CAUTION!
:
Besureexposedportionofwiresdoesnottouchotherwires.
13. Tightenscrewsonterminalblock.Gentlytugwiretobesureofproperconnection.Doublecheckthateachwireis
connectedtotheproperterminal.
14. Sealholeforwireswithnon-ammableputtyorinsulation.
15. Replacecoveronthermostatbysnappingitinplace.
16. Turnonpowertothesystematthemainservicepanel.
17. Testthermostatoperationasdescribedinthefollowingsection.
CAUTION!
:
Donotswitchsystemtocooliftheoutdoortemperatureisbelow50°F(10°C).Thiscandamage
theairconditioningsystemandmaycausepersonalinjury.
1. PuttheMode switchtoCoolposition.
2. Pressthe buttonuntilthetemperaturesettingisatleast3degreesbelowtheroom
temperature.Theairconditioningsystemandfanshouldturnonwithinafewseconds.
3. PuttheMode switchintheOffposition.Theairconditioningsystemshouldturnoff.
Thefanmayhaveadelay.
Note:
PressingtheResetbuttonwillbypassthe5-minuteanti-shortcycle
compressorprotection.
Cool Off Heat Emer
Cool Off Heat Emer
Mode
Mode
Testing the Thermostat
7
Note:
WhileinCoolorHeatmode,oncethethermostatturnsthesystemoff,abuilt-indelaykeepsthe
compressorfromturningonforabout5minutes.Thisprotectsthecompressor.
4. PuttheMode switchtotheHeatposition.
5. Pressthe buttonuntilthetemperaturesettingisatleast3degreesaboveroom
temperature.Theheatingsystemshouldturnon.
Note:
Thecompressormaynotturnonagainfor5minutes.
6. PuttheMode switchtotheOffposition.Theheatingsystemshouldturnoff.Onceagain
thefanmayhaveadelay.
7. PuttheFan switchtotheOnposition.Theblowerfanshouldturnon.
8. PuttheFan switchtotheAutoposition.Theblowerfanshouldturnoff.
Ifallfunctionsoperateproperly,thethermostatisinstalledcorrectly.
If the thermostat does not operate properly:
• Checkallwiringconnections
• SeeTroubleshooting(Page25)
Cool Off Heat Emer
Auto On
Auto On
Cool Off Heat Emer
Mode
Mode
Fan
Fan
8
TherearethreeLEDindicatorslocatedonthefrontofthethermostat.Theyaredesignedtoinformyouofthefollowing:
AUX (GREEN): Thisturnsonwhentheauxiliary(back-up)heatingisinoperation.Thisisthesecond(non-economy)
stageofheat.Itturnson2degreesbelowrststageandisnotadjustable.
CHECK (RED): Whenthisturnson,amalfunctionhasoccurredsomewhereintheheatpumpsystem.Pleasecontact
aqualiedservicetechnicianassoonaspossibletocheckyoursystem.
EMER (RED):This light turns on whenever the emergency heat is manually selected (system switch is in
the EMER position). While in the emergency heat mode, the heat pump compressor is off,
and the emergency heat (same as the auxiliary heat) maintains the setpoint temperature.
Cool Off Heat Emer OnAuto
Aux Check Emer
EMER (RED)
CHECK (RED)
AUX (GREEN)
LED Indicators
Altri manuali per SC2201
2
Indice
Altri manuali ICM Controls Termostato
ICM Controls
ICM Controls SC900V Istruzioni generali
ICM Controls
ICM Controls ICM I3 Istruzioni per l'installazione e il funzionamento
ICM Controls
ICM Controls SC3000L Manuale utente
ICM Controls
ICM Controls SC1600L/VL Manuale utente
ICM Controls
ICM Controls SimpleComfort PRO SC5812 Manuale utente
ICM Controls
ICM Controls SC 2000 Istruzioni generali
ICM Controls
ICM Controls SC 4811 Istruzioni generali
ICM Controls
ICM Controls SimpleComfort SC2211L Manuale utente
ICM Controls
ICM Controls SC 5811 Manuale utente
ICM Controls
ICM Controls SC710 Istruzioni generali
ICM Controls
ICM Controls SC710LV Istruzioni generali
ICM Controls
ICM Controls SC 2000 Manuale di istruzioni
ICM Controls
ICM Controls MP2211L Manuale utente
ICM Controls
ICM Controls MP2010L Istruzioni generali
ICM Controls
ICM Controls SC 4211 Istruzioni generali
ICM Controls
ICM Controls SC 3801 Manuale utente
ICM Controls
ICM Controls SC1800L Manuale utente
ICM Controls
ICM Controls SC1001 Istruzioni generali
ICM Controls
ICM Controls SC 2300 Istruzioni generali
ICM Controls
ICM Controls SC 2210 Istruzioni generali
