ICON PFIVEX73313.0 Manuale utente
USERʼS MANUAL
Visit our website
www.iconsupport.eu
Model No. PFIVEX73313.0
Serial No. :
___________
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
QUESTIONS ?
If you have questions, or if there are
missing parts, please contact us:
UK
Call: 08457 089 009
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5QJ
UK
Write the serial number in the
space above for reference.
Serial No Decal
2
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . .
. . . . . . . .
. .
. . . . . . . .
. .
. . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
IMPORTANT PRECAUTIONS
. . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
MAINTENANCE AND TROUBLESHOOTING
.
. . . . . . . . . . . . . . . . . . . .
.
. . . . . . . . . . . . . . . . . . . . 7
HOW TO OPERATE THE BIKE . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
HOW TO MEASURE YOUR PULSE .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
.
. . . . . . . . . . . . . . . . . . . . 8
CONSOLE FEATURES. . . . . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
EXERCISE GUIDELINES. . . . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
EXPLODED DRAWINGS. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PART LIST . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Last page
115 Kg
115 Kg
115 Kg
ENGLISH
115 Kg
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the
warning decal(s). If a decal is missing or
illegible, call the telephone number on the
front cover of this manual and request a free
replacement decal. Apply the decal in the
location shown.
Note: The decal(s) may not be shown at
actual size.
3
IMPORTANT PRECAUTIONS
WARNING : To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your bike before using it. ICON assumes no
responsibility for personal injury or property damage sustained by or through the use of this
product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or
persons with pre-existing health problems.
2. Use this bike only as described in this
manual.
3. It is the responsibility of the owner to ensure
that all users of the bike are adequately
informed of all precautions.
4. The bike is intended for home use only.
Do not use the bike in a commercial,
rental, or institutional setting.
5. Keep the bike indoors, away from
moisture and dust. Place the bike on a
level surface, with a mat beneath it to protect
the oor or carpet. Make sure that there is at
least 3 ft. (0.9 m) of clearance in the front and
rear of the bike and 2 ft. (0.6 m) on each
side.
6. Inspect and properly tighten all parts
regularly. Replace any worn parts
immediately.
7. Keep children under age 12 and pets away
from the bike at all times.
8.The bike should not be used by persons
weighing more than 250 lbs. (115 kg).
9. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the bike. Always wear athletic
shoes for foot protection while exercising.
10. Hold the handlebars or the upper body arms
when mounting, dismounting, or using the
bike.
11. The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in
determining heart rate trends in general.
12. Keep your back straight while using the
bike; do not arch your back.
13. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
4
BEFORE YOU BEGIN
Thank you for purchasing the ProForm® Saturn.
The bike provides an array of features designed to
make your workouts at home more effective and
enjoyable.
For your benet, read this manual carefully be-
fore you use the bike. If you have questions after
reading this manual, please see the front cover of
this manual. To help us assist you, note the prod-
uct model
number and serial number before contacting us.
The model number is PFIVEX73313.0 and the lo-
cation of the serial number decal are shown on the
front cover of this manual.
5
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and re-
move the packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver and
an adjustable wrench.
As you assemble the exercice bike, use the drawings below to identify small parts. The number in
parentheses below each drawing is the key number of the part, from the PART LIST near the end of
this manual. The number following the parentheses is the quantity needed for assembly.
Note: If a part is not in the hardware kit, check to see if it has been preassembled.
6
STEP 1
Attach front stabilizer (2) and rear stabilizer (4) to
main frame (1) by xing Carriage bolt(6), Arc wash-
ers(8) and cap nut (9)
STEP 2
Thread the right pedal (11R)which marked “R” onto
the right side of the crank(10) , then circumvolved
easilly and tighten; Do the same way to thread the
left pedal (11L) which marked “L” onto the left side of
the crank (10), then circumvolve anticlockwise and
tighten
STEP 3
While another person holds the Upright (17) near the
Frame (1), connect the Extension Wire (15) to the
sensor Wire (13). Next, connect the Resistance Ca-
ble (14) to the Lower Cable (12) in the following way:
• See drawing A. Pull upward on the metal bracket
on the Lower Cable (12), and insert the tip of the Re-
sistance Cable (14) into the wire clip inside the metal
bracket as shown.
• See drawing B. Firmly pull the Resistance Cable
(14) upward and slide it into the top of the metal
bracket as shown.
• See drawing C. Using pliers, squeeze the prongs
on the upper end of the metal bracket together.
Push the Wires (13,15) and the Cables (12,14)
downward into the Frame (1).
Tip: Do not pinch the wires and cables. Insert the
Upright (17) into the Frame (1). Attach the Upright
with four Screws (16) and four Curved washer (8).
ABC
9
6
6
9
12 12
14 Metallic
support
Metallic
support
14
7
STEP 4
Pull the handlebar wire(25) out of the hole of upright post
post (17) ,then Put the handlebar (24) onto the upright post
(17) by using washer (23) and inner hex bolt(21)&spring
washer(22) , then cover with the handlebar chuck cover
(20).
STEP 5
Connect the Handlebar wire (25) and the Extended Wire(15)
to the wires of the computer(29), then attach the computer
(29) onto the computer bracket of the upright post (17)with
the screw (27).
STEP 6
Assemble the horizontal post(36) to the saddle post (31)
and fasten the at washer (33) & pop pin nut(32), and then
insert the saddle (37) to the post of the horizontal post(36)
and fasten it .
Insert the saddle post(31) which xed with the saddle (37)
into the post of the main frame(1), and adjust the length
then tighten them with the pop pin knob(30).
Now, your machine is ready for use.
8
HOW TO ADJUST THE HEIGHT AND THE LATERAL
POSITION OF THE SEAT
For effective exercise,
the seat should be at the
proper height. As you
pedal, there should be a
slight bend in your knees
when the pedals are in
the lowest position. To
adjust the height of the
seat, rst loosen the seat
post knob. Next, pull the
knob, slide the seat post
upward or downward to the desired position, and
then release the knob. Move the seat post upward
or downward slightly to make sure that the knob is
engaged in one of the adjustment holes in the seat
post. Then, tighten the knob.
To adjust the lateral position of the seat, rst loosen
the seat knob a few turns. Then, move the seat
forward or backward to the desired position, and
rmly tighten the seat knob
HOW TO ADJUST THE PEDAL STRAPS
To adjust the pedal straps, rst pull the ends of the
pedal straps off the tabs on the pedals.
Adjust the pedal
straps to the desired
position, and then
press the ends of the
pedal straps onto the
tabs.
HOW TO OPERATE THE BIKE
Pedal
Strap
9
MEASURE YOUR HEART RATE IF DESIRED
You can measure you heart rate using either the
handgrip pulse sensor or the optional chest pulse
sensor.
Note: If you hold the handgrip pulse sensor and
wear the chest pulse sensor at the same time, the
console will not display your heart rate accurately.
If there are sheets of clear plastic on the metal
contacts on the handgrip pulse sensor, remove
the plastic. In addition, make sure that your hands
are clean. To measure your heart rate, hold the
handgrip pulse sensor with your palms resting
against the metal contacts. Avoid moving your
hands or gripping the contacts tightly.
When you are nished exercising
If the pedals do not move for several minutes and
the buttons are not pressed, the console will turn
off and the display will be reset.
MEASURE YOUR HEART RATE IF DESIRED
Contact
10
IInspect and tighten all parts of the exercise cycle
regularly.
Replace any worn parts immediately.
To clean the exercise cycle, use a damp cloth and a
small amount of mild detergent.
Important: To avoid damaging the console, keep
liquids away from the console and keep the console
out of direct sunlight.
BATTERY REPLACEMENT
If the console display becomes dim, the batteries
should be replaced; most console problems are the
result of low batteries.
The console requires two 1,5V AA batteries; alkaline
batteries are recommended. Remove the battery
cover from the console. Insert two batteries into the
console.
Make sure that the batteries are oriented as shown
by the diagram inside the console. Then, reattach
the battery cover.
MAINTENANCE AND TROUBLESHOOTING
Indice
Altri manuali ICON Cyclette
ICON
ICON PRO-FORM ZR3 Manuale utente
ICON
ICON pro-form 250 cx Manuale utente
ICON
ICON PRO-FORM CYCLE TRAINER 400 Ri Manuale utente
ICON
ICON HEALTHRIDER H25X Manuale utente
ICON
ICON NordicTrack GX2 Manuale utente
ICON
ICON PRO-FORM PRO C22 Manuale utente
ICON
ICON NordicTrack VU29 Manuale utente
ICON
ICON PRO-FORM 300 CR Manuale utente
ICON
ICON NordicTrack GX4.7R Manuale utente
ICON
ICON Pro-Form 425 ZLX PFEVEX74012.0 Manuale utente
ICON
ICON PRO-FORM 480 CSX Manuale utente
ICON
ICON PRO-FORM PRO 1500 Manuale utente
ICON
ICON NordicTrack u8.9b Manuale utente
ICON
ICON NordicTrack S27i Manuale utente
ICON
ICON PRO-FORM X-BIKE DUO Manuale utente
ICON
ICON STAMINA X AIR BIKE Manuale utente
ICON
ICON PRO-FORM le de TOUR France Manuale utente
ICON
ICON NordicTrack COMMERCIAL S10i STUDIO CYCLE Manuale utente
ICON
ICON NTEX12921.4 Manuale utente
ICON
ICON PRO-FORM SPORT CX Manuale utente
