Icop VDX-6326RD-NF Manuale utente
User Manual
VDX-6326RD-NF
with
DM&P Vortex86DX
800MHz processor
Version 1.1
VDX-6326RD-NF User Manual
ICOP Technology Inc. I
Copyright
The information in this manual is subject to change without notice for continues
improvement in the product. All rights are reserved. The manufacturer assumes no
reasonability for any inaccuracies that may be contained in this document and
makes no commitment to update or to keep current the information contained in
this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in
whole or in part, in any form or by any means without the prior to written
permission of ICOP Technology Inc.
ⓒ Copyright 2018 ICOP Technology Inc
Trademarks Acknowledgement
Vortex86DXTM is the registered trademark of DM&P Electronics Inc.
Other brand names and product names that appear in this document are the
properties and registered trademarks of their respective owners. All names
mentioned herewith are served for identification purpose only.
VDX-6326RD-NF User Manual
ICOP Technology Inc. II
Revision History
Revision Date Remark
1.0 May 7, 2017 First version released
1.1 Feb 7, 2020 Remove Y cable from cable list
VDX-6326RD-NF User Manual
ICOP Technology Inc. III
Table of Contents
General Information................................................................................................................................... 1
1.1 Packing List ....................................................................................................................................... 1
1.2 Block diagram ................................................................................................................................... 1
1.3 Specifications .................................................................................................................................... 2
1.4 Ordering Information ..................................................................................................................... 3
2 Hardware Information ..................................................................................................................... 4
2.1 Dimension ......................................................................................................................................... 4
2.2 Board Outline and Connector Location ....................................................................................... 5
2.3 Connector and Jumper Summary .................................................................................................. 6
2.4 Pin Assignments & Jumper Settings ............................................................................................. 8
J1: IDE ................................................................................................................................................. 8
J2: Jumper Switch for CF Mater/Slave ........................................................................................... 8
J4: USB1 ............................................................................................................................................... 9
J6: LAN ................................................................................................................................................ 9
J8: Reset................................................................................................................................................ 9
J9: PS/2 Connector (for Keyboard/Mouse) .................................................................................. 9
J10: COM1 (Optional: TTL/GPIO-P4/PWM x8) ..................................................................... 10
J11: GPIO (Port0/1 or PWM x16) ................................................................................................ 10
J12: COM2 RS232/433/485 (Optional: TTL) ............................................................................. 10
J15: RS485 (Auto direction) ............................................................................................................ 11
J16: Power Connector (Terminal Block: 5.0mm) ........................................................................ 11
J17: COM3 (Optional: TTL) ........................................................................................................... 11
J18: Parallel ........................................................................................................................................ 12
J19: COM4 (Optional: TTL) ........................................................................................................... 12
VDX-6326RD-NF User Manual
ICOP Technology Inc. IV
J25: PC/104 Connector (64pins) .................................................................................................... 13
J26: PC/104 Connector (40pins) .................................................................................................... 14
J27: 4P Power Source (Interconnect to PC/104 – J25) .............................................................. 14
J29: PC/104 (Optional: TTL) ......................................................................................................... 15
J30: VGA ........................................................................................................................................... 17
J31: LVDS .......................................................................................................................................... 17
J32 to J38: Display Type Setup (CRT/LCD) ............................................................................... 18
J33: LCD (DVO) Connector .......................................................................................................... 19
J40: Lint-out ...................................................................................................................................... 19
J41: MIC-in ........................................................................................................................................ 19
J42: LAN2 .......................................................................................................................................... 20
J43: LAN3 .......................................................................................................................................... 20
J44: Jumper Switch for LAN2 ........................................................................................................ 20
J45: Jumper Switch for LAN3 ........................................................................................................ 20
2.5 System Mapping ............................................................................................................................. 21
2.6 Watchdog Timer ............................................................................................................................ 24
2.7 GPIO ............................................................................................................................................... 24
2.8 SPI Flash ......................................................................................................................................... 24
2.9 PWM ................................................................................................................................................ 25
2.10IDE to Micro SD .......................................................................................................................... 26
3 Driver Installation ........................................................................................................................... 27
4 Software Resources......................................................................................................................... 28
4.1 ICOP Technical Resource Website ............................................................................................. 28
Technical Support Directly from ICOP ................................................................................................ 29
User Manual Feedback ............................................................................................................................. 29
Appendix .................................................................................................................................................... 30
TFT Flash Panel Data Output ............................................................................................................ 30
VDX-6326RD-NF User Manual
ICOP Technology Inc. V
TFT Flash Panel Support List ............................................................................................................ 31
Flat Panel Hardware Setting ................................................................................................................ 33
Flat Panel Wiring and Lighting ........................................................................................................... 34
TCP/IP Library for DOS Real Mode................................................................................................ 34
BIOS Default Setting ........................................................................................................................... 35
Warranty ..................................................................................................................................................... 36
VDX-6326RD-NF User Manual
ICOP Technology Inc. 1
General Information
1.1 Packing List
Product Name Package
VDX-6326RD-NF
VDX-6326RD-NF-512
VDX-6326RD-NF board x1
RS232 cable x3
Parallel cable x1
IDE cable x1
LAN cable x2
GPIO cable x1
Audio line x2
USB cable x1
1.2 Block diagram
VDX-6326RD-NF Series
IDM x1
CF x1
SPI Disk x1
COM x4
USB x3 Line-in & MIC-out x1
Keyboard/Mouse x1
Parallel x1
16-bit GPIO x1
VGA x1
LVDS x1
LAN x3
PC/104 x1
LCD x1
Mini PCI x1
PCI-104 x1 (Optional)
VDX-6326RD-NF User Manual
ICOP Technology Inc. 2
1.3 Specifications
CPU Vortex86DX 800MHz
RMA 256/512MB DDR2 Onboard
BIOS AMI BIOS
Bus PC/104 standard compliant Mini PCI standard compliant
Display XGI Volari Z9s Chipset with VGA, TFT-LCD, and 18-bit LVDS Flat Panel
Interface Support and onboard 32MB VGA memory
VGA: Maximum resolution up to 1280 x 1024 @ 60Hz
LVDS/TFT-LCD: Maximum resolution up to 1024 x 768 @ 60Hz
LAN Integrated 10/100Mbps Ethernet x1
Realtek 8100B 10/100Mbps Ethernet x2
Disk Support IDE DoM Compact Flash Onboard 4MB SPI Flash
SRAM Support
512KB (Optional)
I/O Interface RS232 x3
USB (Ver. 2.0) x3
16-bit GPIO x1
RS232/422/485 x1
Parallel x1
Audio
Connectors 2.54mm 4-pin pin header for +12V, -12V, -5V, GND x1
2.54mm 2-pin pin header for Reset x1
2.54mm 3-pin pin header for RS485 x1
2.54mm 104-pin PC/104 connector x1
2.0mm 8-pin header for Ethernet x2
2.0mm 16-pin pin header for LVDS x1
2.0mm 44-pin box header for IDE x1
2.0mm 44-pin box header for LCD x1
2.0mm 26-pin box header for Parallel x1
2.0mm 20-pin box header for 16-bit GPIO x1
2.0mm 10-pin box header for RS232 x3
2.0mm 10-pin box header for USB x1
1.25mm 4-pin wafer for Line-in/MIC-out x2
0.8mm 124-pin Mini PCI connector x1
9-pin D-Sub male connector for RS232 x1
15-pin D-Sub female connector for VGA x1
RJ45 connector for Ethernet x1
USB connector x1
Mini DIN connector for Keyboard/Mouse x1
Type I/II Compact Flash Slot x1
PCI-104 connector x1 (Optional)
VDX-6326RD-NF User Manual
ICOP Technology Inc. 3
Power
Requirement DC +5V @ 880mA
Operating
Temperature
-20°C - +70°C
-40°C - +85°C (Optional)
Dimension 102 x 146mm
Weight 150g
O/S Support Windows Embedded 2009
Windows Embedded CE6.0
Windows Embedded CE5.0
Linux
Free BSD
DOS
POS Ready (WePOS)
VxWorks
1.4 Ordering Information
PART NO. VDX-6326RD-NF VDX-6326RD-NF-512
CPU (MHz) 800MHz
DRAM (DDR3) 256MB 512MB
Storage
IDE DoM
Compact Flash
SPI Flash
Display VGA, LVDS, TFT-LCD
Bus PC/104, PCI-104 (Optional)
LAN 3
RS232 3
RS485 1
USB 3
Parallel 1
Audio Line-out, MIC-in
Keyboard 1
Mouse 1
VDX-6326RD-NF User Manual
ICOP Technology Inc. 4
2 Hardware Information
2.1 Dimension
Indice
Altri manuali Icop Hardware per computer
Icop
Icop VEX2-6454 Manuale utente
Icop
Icop IBW-6954 Manuale utente
Icop
Icop SOM304D3 Manuale utente
Icop
Icop VSX-6116-V2 Manuale utente
Icop
Icop VDX2-6526 Manuale utente
Icop
Icop VDX-6329 Manuale utente
Icop
Icop VDX-6328RD Manuale utente
Icop
Icop VSX-6114-V2 Manuale utente
Icop
Icop VDX-6318RD Manuale utente
Icop
Icop QEC-M-090T Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
