Icop VSX-6114-V2 Manuale utente
VSX-6114-V2 / VSX-6114-V2-AU
DM&P Vortex86SX 300MHz
Tiny CPU Module
with 4S/2USB/VGA/LVDS/LAN/GPIO
128MB DDR2 Onboard
User’s Manual
(Revision 1.0A)
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc..
Copyright 2007 ICOPTechnology Inc.
Manual No. IUM6114-V2000-01 Ver.1.0A October, 2009
Trademarks Acknowledgment
Vortex86SXis the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.
T a b l e o f C o n t e n t s
T ab l e o f C o n t e nt s.............................................................iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List............................................................1
1.2 Product Description................................................1
1.3 Specifications.........................................................3
1.4 Board Dimension....................................................5
C h a p t e r 2 Installation……………………………………………..6
2.1 Board Outline.........................................................6
2.2 Connectors & Jumpers Location............................7
2.3 Connectors & Jumpers Summary...........................9
2.4 PinAssignments & Jumper Settings.....................10
2.5 System Mapping...................................................16
2.6 Watchdog Timer...................................................19
2.7 GPIO....................................................................20
2.8 SPI flash...............................................................21
C h a p t e r 3 Driver Installation……………………………………22
Appendix ………………………………………………………………..23
A. LVDS Flat Panel Support List....................................23
B. Flat Panel Wiring and Lighting..................................24
C. TCP/IPlibrary forDOS real mode.............................25
D. BIOS Default Setting.................................................26
Warranty............................................................................................27
Vortex86SX-6114-V2 Vortex86SXTiny CPU Module
1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
VSX-6114-V2
&
VSX-6114-V2-AU
Embedded Vortex86SX CPU All-in-One Board
Manual & Drivers CD x 1
RS232 cable x 4
IDE cable x 1
USB cable x 1 (USB port x 2)
VGA cable x 1
GPIO cable x 1
PS/2 Mouse cable x 1
PS/2 Keyboard cable x 1
Vortex86SX-6114-V2 Vortex86SXTinyCPUModule 2
1.2 Product Description
The VSX-6114-V2 family of low-power x86 embedded controller is designed to meet Tiny
specification, and integrated with the following features.
300 MHz Vortex86SX System-On-Chip
128MB DDR2 system memory
VGA, LVDS LCD support up to
1280x1024 resolution
Enhanced IDE (UltraDMA-100/66/33)
10/100Mbps Ethernet
2 USB 2.0 (host)
Up to 4 serial ports
16-bit GPIO x1
x-ISAbus
RS-485 withAuto Direction
2 watchdog timer
Audio (Optional)
JTAG interface
AMI BIOS
2MB SPI flash
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
The VSX-6114-V2Tiny family of embedded controller is designed with backward compatibility in
mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based Tiny controller. The VSX-6114-V2 family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VSX-6114-V2 is suitable for broad range of data-acquisition, Industrial automation, Process
control,Automotive controller,AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery controlAnd more…application that required
small footprint, low-power and low-cost hardware with open industry standard such asTiny.
Vortex86SX-6114-V2 Vortex86SXTinyCPUModule 3
1.3 Specifications
Features VSX-6114-V2
CPU DM&P SoC CPU Vortex86SX- 300MHz
Real Time Clock with Lithium Battery Backup
Cache L1:16K I-Cache, 16K D-Cache
BIOS AMI BIOS
Bus Interface 16-bit x-ISA interface
System Memory 128 / 256MB DDR2 Onboard
Watchdog Timer Software programmable from 30.5 us to 512 seconds x2
sets(Watchdog 1 fully compatible with M6117D)
VGA XGI Volari Z9s Chipset
VGA and LVDS Flat Panel Interface Support
Onboard 32MB VGA Memory
Support resolution up to 1280 x 1024,16MB colors
LAN Integrated 10/100M Ethernet
Audio CM119 USB Audio Controller (Optional)
I /O Interface Enhanced IDE port (UltraDMA-100/66/33) x1
RS-232 port x3
RS-232/422/485 port x1(RS485 with Auto Direction)
USB port x2 (USB 2.0 version)
16-bit GPIO port x1
10/100Mbps Ethernet port x1
Connectors
2.00 mm 44-pin box header for IDE x1
2.00 mm 20-pin box header for 16-bit GPIO x1
2.00 mm 10-pin box header for RS-232 x4
2.00 mm 10-pin box header for USB x1
2.00 mm 10-pin box header for VGA x1
2.00 mm 16-pin header for LVDS x 1
2.54 mm 3-pin header for RS-485 x1
2.54 mm 5-pin header for keyboard x1
2.54 mm 5-pin header for Mouse x1
2.54 mm 2-pin header for Reset x1
1.25 mm 6-pin wafer for JTAG x1
1.25 mm 4-pin wafer for Line-out/MIC-in x2 (Opt.)
External RJ-45 connector for Ethernet x1
Flash Disk Support
Onboard 2MB SPI Flash Disk (Driver: A)
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
Vortex86SX-6114-V2 Vortex86SXTinyCPUModule 4
Power Requirement Single Voltage +5V @ 620mA
Dimension 100mm X 66mm (3.94 x2.6 inches)
Weight 65g
Operating
Temperature -20oC ~ +70oC
-40°C ~ +85°C (Optional)
Vortex86SX-6114-V2 Vortex86SXTinyCPUModule 5
1.4 Board Dimension
Vortex86SX-6114-V2 Vortex86SXTinyCPUModule 6
C h a p t e r 2
Installation
2.1 Board Outline
(Note1: COM2 RS232/422/485 is selected by BIOS setting)
(Note2:Audio is optional)
Vortex86SX-6114-V2 Vortex86SXTinyCPUModule 7
2.2 Connectors & Jumpers Location
Connectors
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Icop Hardware per computer
Icop
Icop QEC-M-01 Manuale utente
Icop
Icop VEX-6254 Manuale utente
Icop
Icop VEX2-6454 Manuale utente
Icop
Icop VDX-6329 Manuale utente
Icop
Icop QEC-M-070T Manuale utente
Icop
Icop QEC-M-090T Manuale utente
Icop
Icop VSX-6115-V2 Manuale utente
Icop
Icop VDX-6326RD-NF Manuale utente
Icop
Icop VEX2-6415 Manuale utente
Icop
Icop VEX-SOM Manuale utente
Icop
Icop IBW-6954 Manuale utente
Icop
Icop VDX-6328RD Manuale utente
Icop
Icop VDX3-6726-V2 Manuale utente
Icop
Icop VDX-6318RD Manuale utente
Icop
Icop VSX-6124 Manuale utente
Icop
Icop VSX-6116-V2 Manuale utente
Icop
Icop VDX2-6526 Manuale utente
Icop
Icop VSX-6154 Manuale utente
Icop
Icop SOM304D3 Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
