ICP DAS USA WISE-52 Series Manuale utente
WISE-5231M / WISE-5236M
Quick Start
v1.0, March 2020
Technical Support
WISE-5231M / WISE-5236M User Manual:
http://wise.icpdas.com/Download.html
ftp://ftp.icpdas.com/pub/cd/wise_cd/
WISE-5231M / WISE-5236M Website:
http://wise.icpdas.com
What’s In the Box?
In addition to this document, the package includes the following
items:
WISE-5231M
or
WISE-5236M
microSD card and
micro SD/SD
adapter
Screw Driver
2.4mm (1C016)
44 mm DIN-Rail
Clip
M3x6L Screw * 4
Pin Terminal * 16
1 Configuring the boot mode
Before starting WISE-5231M / WISE-5236M
at the first time, be sure that the switch is
placed in the “0” position.
2 Connect to PC, Network and Power
The WISE-5231M / WISE-5236M is equipped with an RJ-45 Ethernet port
for connection to an Ethernet hub/switch and PC. You can also link
directly the WISE-5231M / WISE-5236M to PC with an Ethernet cable.
After power is connected, please wait one minute for WISE-5231M /
WISE-5236M start-up procedure. When the "RUN/PWR" light starts
flashing, it represents the boot is complete.
3 Using Browser to Assign a New IP
The WISE-5231M / WISE-5236M is an Ethernet controller, which comes
with a default IP setting; therefore, you must first assign a new IP setting
to the LAN1 port of WISE-5231M / WISE-5236M. The factory default IP
settings of WISE-5231M / WISE-5236M are as follows:
Item
Default
IP Address
192.168.255.1
Subnet Mask
255.255.0.0
Gateway
192.168.0.1
DNS Server
8.8.8.8(Default: Google DNS Server)
Follow the following steps for WISE-5231M/WISE-5236M new IP setting:
Step1: Change the PC’s IP setting same as WISE-5231M/WISE-5236M’s
IP domain. For example, set PC's IP as 192.168.255.10.
Step2: Make sure the PC and WISE-5231M / WISE-5236M is connecting
through Ethernet.
Step3: Open a PC side browser, and type in the URL address
(http://192.168.255.1) of the WISE-5231M / WISE-5236M to
connect the Web Server in WISE-5231M / WISE-5236M.
Step4: Use default Administrator password “Admin” to login the system.
Step5: Please follow the sequence【System Setting】【Network Setting】
【Network Setting(LAN1)】to change the IP setting of
WISE-5231M / WISE-5236M.
Step6: After complete the IP setting, please save it, and then the new IP
setting will take effect.
4 Go to WISE-5231M / WISE-5236M Web
Please follow the steps below to implement IF-THEN-ELSE control logic
on ICP DAS WISE-5231M / WISE-5236M controllers:
Step1: Open a browser, and type in the URL address of the
WISE-5231M / WISE-5236M
Open a browser and type in the URL address(The new IP setting) of
the WISE-5231M / WISE-5236M in the address bar. Make sure the IP
address is accurate.
Step2: Get on the WISE-5231M / WISE-5236M web site
Get on the WISE-5231M / WISE-5236M web site. Login with the
default password “Admin”. Implement the control logic configuration in
the order:【Module Setting】【Advanced Setting】【Rule Setting】
【Save】, then complete the IF-THEN-ELSE rule editing.
Step3: For more detail information, please refer to WISE-5231M /
WISE-5236M User Manual
Site to edit Control Logic
技術支援: servic[email protected] P1
WISE-5231M / WISE-5236M
快速上手指南
v1.0, March 2020
技術支援
WISE-5231M / WISE-5236M使用手冊：
http://wise.icpdas.com/Download.html
ftp://ftp.icpdas.com/pub/cd/wise_cd/
WISE-5231M / WISE-5236M 產品網頁：
http://wise.icpdas.com
產品內容
除了本『快速上手指南』外，此產品內容還包括以下配件：
WISE-5231M
或
WISE-5236M
microSD 卡及
micro SD/SD轉接卡
螺絲起子 2.4mm
(1C016)
44 mm DIN-Rail
導軌固定架
M3x6L 螺絲 * 4
歐式壓著端子 * 16
技術支援: servic[email protected] P2
1 檢視啟動模式
在第一次啟動 WISE-5231M / WISE-5236M
前，請先確認旋轉式開關的位置在“0”。
2 連接 PC 主機、網路及電源
WISE-5231M / WISE-5236M配有標準的網路接口 RJ-45，可透過網路集
線器/交換器與 PC 連接，也可直接連到 PC 的網路接口。接上電源後，
WISE-5231M / WISE-5236M 開機程序須等待約一分鐘，待"RUN/PWR"燈
開始閃爍則代表開機完成，可進行連線與設定。
技術支援: servic[email protected] P3
3 設定 WISE-5231M / WISE-5236M 的IP 位址
WISE-5231M / WISE-5236M 在出廠時會統一預設網路設定值，使用者可
以依照下列步驟自行變更網路設定。網路出廠預設值為：
項目
預設值
IP 位址
192.168.255.1
子網路遮罩 (Subnet Mask)
255.255.0.0
通訊閘道 (Gateway)
192.168.0.1
DNS Server
8.8.8.8(預設為 Google DNS Server)
步驟 1：將PC 的網路設定更改為與 WISE-5231M / WISE-5236M 相同網
路區段。例如 IP：192.168.255.10
步驟 2：確認 WISE-5231M / WISE-5236M 與PC 已透過網路正確連接。
步驟 3：開啟 PC 端的瀏覽器並於網址列輸入 http://192.168.255.1。
步驟 4：輸入管理者預設密碼“Admin”進行登入。
步驟 5：登入成功後至【系統參數設定】【網路設定】【網路設定(LAN1)】，
根據實際網路環境更改網路設定。
步驟 6：儲存成功後將 WISE-5231M/WISE-5236M 連接至實際網路環境。
技術支援: servic[email protected] P4
4 前往 WISE-5231M / WISE-5236M 網頁進行邏輯規則
使用者透過 WISE-5231M / WISE-5236M 所提供的網頁，只需使用滑鼠點
選設定，即可完成控制器上的 I/O 模組連接與工作邏輯的規劃。
步驟 1：開啟瀏覽器，填入 WISE 模組 IP 作為瀏覽器的 URL 位址
開啟電腦上的瀏覽器，輸入 WISE-5231M / WISE-5236M 的IP 作
為URL 位址(如有重新設定 IP，請確認所輸入 IP 是否正確)。
步驟 2：進入 WISE-5231M / WISE-5236M 的設定頁面
進入 WISE-5231M / WISE-5236M 所提供的參數設定頁面，使用
預設密碼“Admin”登入後，僅需依照首頁上的設定流程：【模組設
定】【進階功能設定】【邏輯規則設定】【寫入設定】，即
可完成 WISE 控制器的邏輯規則編排。
步驟 3：設定流程中的細節，請參照 WISE-5231M / WISE-5236M 操作手
冊
設定
Questo manuale è adatto per i seguenti modelli
9
Indice
Altri manuali ICP DAS USA Controllori
ICP DAS USA
ICP DAS USA SMS-531 Manuale utente
ICP DAS USA
ICP DAS USA GRP-2841M-5GE Manuale utente
ICP DAS USA
ICP DAS USA ALM-04-MRTU Manuale utente
ICP DAS USA
ICP DAS USA ISaGRAF PAC Series Manuale utente
ICP DAS USA
ICP DAS USA WinPAC-8000 Series Manuale utente
ICP DAS USA
ICP DAS USA MP-8 43 Series Manuale utente
ICP DAS USA
ICP DAS USA I-8431 Manuale utente
ICP DAS USA
ICP DAS USA TPD-283U-M1 Manuale utente
ICP DAS USA
ICP DAS USA LX-8131 Manuale utente
ICP DAS USA
ICP DAS USA ISaGRAF mPAC Series Manuale utente
ICP DAS USA
ICP DAS USA ISaGRAF WinCE ViewPAC Manuale utente
ICP DAS USA
ICP DAS USA TPD-280-H Manuale utente
ICP DAS USA
ICP DAS USA CAN-8124 Manuale utente
ICP DAS USA
ICP DAS USA I-8411 Manuale utente
ICP DAS USA
ICP DAS USA TPD-283U-H Manuale utente
ICP DAS USA
ICP DAS USA GT-530 Manuale utente
ICP DAS USA
ICP DAS USA 7188E Istruzioni per l’uso
ICP DAS USA
ICP DAS USA WP-2641M-CE7 Manuale utente
ICP DAS USA
ICP DAS USA I-7188XG Manuale utente
ICP DAS USA
ICP DAS USA LP-8x4x Manuale utente
