IDENTEC SOLUTIONS IPOINT X Istruzioni per l’uso

IDENTEC SOLUTIONS

Model IDS1002

iPOINT X (ATEX)

HARDWARE USER MANUAL

iPOINT X – Hardware User Manual | 18.06.2020

Proprietary Notice

This document contains confidential information proprietary to IDENTEC SOLUTIONS and may not be used or

disclosed to other parties in whole or in part without the prior written authorization from IDENTEC SOLUTIONS.

Disclaimer and Limitation of Liability

IDENTEC SOLUTIONS AG and its affiliates, subsidiaries, officers, directors, employees and agents do not make

any express or implied warranties or representations with respect to such information including, without limitation,

warranties as to non-infringement, reliability, suitability for a particular purpose and accuracy. IDENTEC

SOLUTIONS shall not under any circumstances be liable to any person for any special, incidental, indirect or

consequential damages, including without limitation, damages resulting from use of or reliance on information

presented herein, or loss of profits or revenues or costs of replacement goods, even if informed in advance of the

possibility of such damages.

Trademarks

“IDENTEC SOLUTIONS”, “Intelligent Long Range”, “ILR” and the stylized “i” are registered trademarks.

“i-PORT”. “iPOINT” and “Visibility Delivered.” are trademarks of IDENTEC SOLUTIONS, Inc. and/or IDENTEC

SOLUTIONS AG.

No part of this document may be reproduced or transmitted in any form by any means, photographic, electronic,

mechanical or otherwise, or used in any information storage and retrieval system, without the prior written

permission of IDENTEC SOLUTIONS.

Issue 1.5 / 18. June 2020 (MOM/FEK/SMEE)

Subject to alteration without prior notice.

Printed in Austria

iPOINT X – Hardware User Manual | 18.06.2020

Radio Frequency Compliance Statement

IDENTEC SOLUTIONS is the responsible party for the compliance of the following devices:

MODEL: IDS1002 iPOINT X

Region/Country Organization Marking

EUROPE: EU CE

USA: FCC FCC ID OO4-IDS1002

CANADA: IC 3538A-IDS1002

The user(s) of these products are cautioned to only use accessories and peripherals approved, in advance, by

IDENTEC SOLUTIONS. The use of accessories and peripherals, other than those approved by IDENTEC

SOLUTIONS, or unauthorized changes to approved products, may void the compliance of these products and result in

the loss of the user(s) authority to operate the equipment.

European Declaration of Conformity according to RED Directive

IDENTEC SOLUTIONS AG hereby declares that the device iPOINT X is in conformity with the essential

requirements of Directive 2014/53/EU. The declaration of conformity can be found at: www.identecsolutions.com

Radio Frequency (RF) Exposure Compliance of Radio Communication Apparatus

To satisfy FCC and ISED RF Exposure requirements for mobile devices, a separation distance of 20 cm or more should be

maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than

this distance is not recommended. This transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

Conformité à l’exposition aux champs RF des équipements radio

Pour satisfaire aux exigences FCC et ISED concernant l'exposition aux champs RF pour les appareils mobile, une distance

de séparation de 20 cm ou plus doit être maintenu entre l'antenne de ce dispositif et les personnes pendant le

fonctionnement. Pour assurer la conformité, il est déconseillé d'utiliser cet équipement à une distance inférieure. Cet émetteur

ne doit pas être co-situé ou fonctionner conjointement avec une autre antenne ou un autre émetteur.

Canada Certification

Licence-Exempt Radio Apparatus (ISED)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1.This device may not cause interference.

2.This device must accept any interference, including interference that may cause undesired operation of the device.

Appareils radio exempts de licence (ISDE)

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,

Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes :

1.L’appareil ne doit pas produire de brouillage;

2.L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre

le fonctionnement.

iPOINT X – Hardware User Manual | 18.06.2020

ATEX Certification

Equipment or protected system intended for use in potentially explosive atmosphere directive 2014/53/EU.

Compliance with the essential health and safety Requirements has been assured by compliance with the following

standards:

EN 60079-0, EN 60079-11

IECEx Certification

The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the

identified documents, was found to comply with the following standards:

IEC 60079-0:2017, IEC 60079-11:2011

Special conditions for safe use – ATEX and IECEx

WARNING – Maintenance under voltage is not permitted.

WARNING – Electrostatic Hazard: Clean only with a damp cloth.

WARNING - Electrostatic Hazard: Do not install in locations with increased electrostatic

charge such as close to ventilations systems or electric drives.

WARNING - This product should be installed by personnel trained in installation of equipment

in Hazardous Locations and meet the representative country’s National Electrical Code.

WARNING - Not to be connected to equipment that uses or generates more than 250V with

respect to earth ground

WARNING - This product contains components that are sensitive to electrostatic discharges.

Please observe the special instructions for their protection. Incorrect handling can damage

the unit and cause the invalidation of the warranty.

Minimum safety precautions against electrostatic discharge:

 Establish earth contact before you touch the unit. (For example, touch the earthing screw on the unit.) Best

practice is to use an antistatic ribbon and earth yourself permanently for the time you handle the unit.

 Avoid unnecessary contact with the unit connectors and assemblies inside the unit.

 Only open the unit if the operational settings (as described in the manual) expressly requires it.

 Use antistatic tools for the setting of the unit. (Warning: Do not touch life-threatening voltages with these tools).

 Do not store unit and components without protective packaging.

 Remove unit and components from the packaging only prior to installation.

EPS 19 ATEX 1 019 X iPOINT X

II 2G Ex ib IIC T4 Gb

-40°C ≤ Ta ≤ +70°C

Gas

I M2 Ex ib I Mb

-40°C ≤ Ta ≤ +70°C

Mining

IECEx EPS 19.0010X iPOINT X

Type of Protection Ex i

Marking Ex ib IIC T4 Gb Gas

Ex ib I Mb Mining

iPOINT X – Hardware User Manual | 18.06.2020

These notes are not sufficient to guarantee complete protection from electrostatic discharges! We

recommend the use of suitable protective equipment.

IDENTEC SOLUTIONS does not accept the return of products where the regulations concerning the ESD

precautions and protective packaging materials were not followed.

Safety Instructions

The equipment can be installed in restricted areas.

The system described in this manual is for exclusive operation of trained employees. Only qualified personnel that

have knowledge of the potential dangers involved should perform the installation, settings, maintenance and repair

of the units used.

Operational Safety

The correct and safe use of these systems assumes that operating and service personnel follow the safety

measures described in the manual alongside the generally acceptable safety procedures.

If there is a possibility that safe operations cannot be guaranteed, the system must be switched off, secured against

accidental use and the service unit responsible immediately informed.

Safety Documents

The iPOINT X was designed, tested and supplied in perfect condition according to document EN 62368-1:2014 and

EN60950-22 Safety Requirements.

Condensate / Change of Temperature

To avoid condensation in the system, the unit must be allowed to slowly adjust itself to warmer temperatures after

removal from cold and cool environments.

Do not open the Main housing

The Connection Chamber can be opened for required cabling needs, but there is no need to open the main

housing (crews from bottom side) in order to set the iPOINT X unit. The unit does not have any internal setting

elements or displays.

Connections / Power Supply

Use shielded cables for the RS422 / RS 485 cables. This is the only way to achieve the prescribed EMC.

During maintenance damage could occur if printed circuit boards or cables are connected or disconnected whilst

the power supply is still on. Therefore, only work on the connection and the components when they are not live.

Spare Parts

We recommend that only personnel, original products, spare and replacement parts authorized by IDENTEC

SOLUTIONS be used for installation, service and repair. IDENTEC SOLUTIONS does not accept any responsibility

for materials used, work carried out or possible consequences from unauthorized third party vendors.

Glossary

 EMC Electromagnetic Compatibility

 PoE Power Over Ethernet

iPOINT X – Hardware User Manual | 18.06.2020

Contents

1. Preface .................................................................................................................................................................... 7

2. Introduction .............................................................................................................................................................. 8

2.1 iPOINT X and System Description ................................................................................................................... 8

2.1.1 UHF Interface ...................................................................................................................................... 9

2.1.2 LF Interface ......................................................................................................................................... 9

2.1.1 LF Limitations for ATEX .................................................................................................................... 10

2.1.2 NFC Interface .................................................................................................................................... 11

2.2 System Components – Tags.......................................................................................................................... 12

2.3 Ports Overview & Topologies......................................................................................................................... 13

2.3.1 RS422 MASTER Connectors & Pinout ............................................................................................. 15

2.3.2 RS485 MASTER Connectors & Pinout ............................................................................................. 15

2.3.3 RS422 HOST Connectors & Pinout .................................................................................................. 15

2.3.4 RS485 HOST Connectors & Pinout .................................................................................................. 15

2.3.5 Connector coding .............................................................................................................................. 16

2.4 Cabling Hints .................................................................................................................................................. 16

2.5 Lid Open Detection ........................................................................................................................................ 16

3. Initial Operation / Configuration ............................................................................................................................. 17

3.1 Status LEDs ................................................................................................................................................... 17

4. Mechanical Information & Installation .................................................................................................................... 18

4.1 Opening the connection Chamber ................................................................................................................. 18

4.2 Mounting Options ........................................................................................................................................... 19

4.2.1 Optional Extra: Pole Mount Bracket Kit ............................................................................................. 20

4.2.2 Optional Extra: Extension Bracket Kit ............................................................................................... 21

5. Troubleshooting ..................................................................................................................................................... 23

6. Maintenance .......................................................................................................................................................... 23

6.1 Firmware Update ........................................................................................................................................... 23

6.2 Spare Parts .................................................................................................................................................... 24

6.3 Returns ........................................................................................................................................................... 24

7. Technical Specifications ........................................................................................................................................ 25

iPOINT X – Hardware User Manual | 18.06.2020

1. Preface

This installation manual must be read carefully prior to starting the installation. The described installation works

assuming that installation materials like cables, antennas and any mechanical parts are available.

This document is the hardware description of the iPOINT X. This document is intended only for mechanical and

electrical installation of these central units.

IDENTEC SOLUTIONS reserves the right to make changes and updates to the content contained herein. It is the

user’s responsibility to contact the service department for any possible changes or updates to operating and

maintenance procedures.

Updates will be provided upon request. The information in this document may be subjected to changes without

prior notice.

Check whether delivery is complete and for any damages. If the delivery is not complete or damaged

immediately inform the carrier. The dispatch and service organization of IDENTEC SOLUTIONS should also

be informed to facilitate the repair or exchange of the system.

Product Contents (deliverables):

 iPOINT X Device

 Mounting Plate

 Cable glands and blind plugs

 Hardware User Manual

Associated Documents

 SDK Online Help

 i-SHARE Manual

 Specific tag manuals

iPOINT X – Hardware User Manual | 18.06.2020

2. Introduction

2.1 iPOINT X and System Description

The iPOINT X device provides a functional ATEX/IECEx certified combination of: The “zone location” system of an

i-MARK, the long-range Reader functionality of an i-PORT as well as close proximity NFC functionality, encased in

an attractive, rugged, IP67 housing.

The Housing contains:

- 5 Status LEDs (see Section 3.1)

- a Connection Chamber where the wired interfaces can be accessed

- Relevant cable glands, as wired access points, depending on the device setup

- Mounting Plate and securing screw (see Section 4)

For a detailed description of how to correctly open the connection chamber and other mechanical information,

please refer to Section 4.1.

The iPOINT X can used as a standalone device or with an interface to an access controller. See Section 2.3 for

more details.

Following is a description of the wireless technologies that are available within the iPOINT X Device.

iPOINT X – Hardware User Manual | 18.06.2020

2.1.1 UHF Interface

The UHF interface is a wireless communication interface using the UHF ISM frequency band and IDENTEC’s

protocols.

The iPOINT X has two internal UHF antennas built in and can communicate up to a range of 500 meters with its

Tags.

The main benefit of two antennas is the elimination of RF dead spots in static systems.

2.1.2 LF Interface

The LF Interface uses IDENTEC’s LFBOOST Marker technology. Zone location at Low Frequency can be achieved

with a configurable field range up to 5 Meters. This allows Tag detection in a specific area.

iPOINT X – Hardware User Manual | 18.06.2020

2.1.1 LF Limitations for ATEX

Due to Barrier (VCL1520) and cable series resistance, it is not possible to operate LF with full power and 12 slots

all the time. Therefore, LF operation is limited by firmware according to the slot scheme and the restrictions below.

LF slot settings depending on configured LF power:

Configured LF

power

Minimum Delay

between LF

Minimum

Cycle delay

Description

0 to 39% 0 ms 10 ms All slots active

40% to 59% 40 ms 10 ms Only 6 slots per frame are active

(1 slot inactive between 2 actives slots)

60% to 79% 100ms 10 ms Only 2 slots actives per frame

(5 slots inactive between 2 actives slots)

80% to 100% 500 ms 250 ms Only 1 slot per double frame is active

ATTENTION: This is just an example. If you have other parameters, additional cable length or other voltage drops

between the Barrier and the iPOINT X the settings mentioned above will differ and can end in improper operation of

LF or even the whole device.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali IDENTEC SOLUTIONS Punto di accesso wireless

IDENTEC SOLUTIONS

IDENTEC SOLUTIONS IDS1000 Istruzioni per l’uso

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente

IDENTEC SOLUTIONS iPOINT X Istruzioni per l’uso

Manuali Punto di accesso wireless popolari di altre marche