iDevices Kitchen Thermometer mini Manuale utente
1
User Manual
2
Table of Contents
In the Box 3
Quick Start Instructions 3
Getting Started 4
iDevices Connected app 4
Battery Replacement 5
Powering On & Off 5
Connecting 6
Mounting 6
Probe Use 7
Probe Wrap Use 8
Using the Kitchen Thermometermini 9
Smart LED 9
Proximity Sensor 10
Custom & Preset Alarms 10
Renaming Probes 12
Timer Tool 12
Globe Tool 12
Graph Tool 12
Problem Solving 13
Frequently Asked Questions: 16
Disclaimer 18
Regulations 18
3
In the Box
Inside your Kitchen Thermometermini box, you will nd:
• 1 Kitchen Thermometermini
• 1 Coin Cell Battery (Installed)
• 1 Meat Probe
• 1 Probe Wrap
• 1 Colored Probe Indicator
• 1 Optional Magnetic Disc
• Quick Start Guide
Quick Start Instructions
1. Download the iDevices®Connected app from the App StoreSM or
Google PlayTM store on one of the following compatible devices
• iPhone®(4S and later)
• iPad®(3rd generation and later)
• iPad miniTM (all generations)
• iPod touch®(5th generation and later)
• Many AndroidTM devices equipped with Bluetooth®4.0 and
running Android software version 4.3 or later
2. Enable Bluetooth on your smart device under ‘Settings’.
3. Separate the Kitchen Thermometermini from its base by rmly
holding the base with one hand and gently pulling the Kitchen
Thermometermini top upwards with the other hand.
4. On the underside of the Kitchen Thermometermini, remove the
battery door by twisting it counter-clockwise. Remove the battery
pull tab. Ensure the battery is in place and replace the battery door.
4
5. Clip the Kitchen Thermometermini top back into its base.
6. Plug the Meat Probe into the probe port of the Kitchen
Thermometermini.
7. Press the power button located at the center of the faceplate
for two seconds. The display will light up, indicating the Kitchen
Thermometermini has powered on.
8. Open the iDevices Connected app to connect to your Kitchen
Thermometermini. Tap on the iDevices logo in the gray toolbar at the
top of the app. Select your Kitchen Thermometermini from the device
manager.
9. You are ready to use your Kitchen Thermometermini!
Getting Started
iDevices Connected app
The iDevices Connected app provides all of the functionality and
customization you’ll need to get the most out of your Kitchen
Thermometermini. The iDevices Connected app is compatible with the
following devices:
• iPhone (4S and later)
• iPad (3rd generation and later)
• iPad mini (all generations)
• iPod touch (5th generation and later)
• Many Android devices equipped with Bluetooth 4.0 and running
Android software version 4.3 or later
You must be running iOS 7+ or Android version 4.3+ on your device to
use the iDevices Connected app. Please visit the App Store or Google
Play store and search “iDevices Connected” to download the free iDevices
Connected app.
Once you’ve downloaded the app, you’ll have access to links
for instructional videos, step-by-step instructions and FAQ’s for
troubleshooting.
5
Battery Replacement
To replace your Kitchen Thermometermini battery, follow these steps:
• Separate the Kitchen Thermometermini from its base by rmly
holding the base with one hand and gently pull the Kitchen
Thermometermini top upwards with the other hand.
• On the underside of the Kitchen Thermometermini, remove the
battery door by twisting it counter-clockwise
• Replace the battery with a CR2032 coin cell battery (available at
local drugstores in the specialty battery section).
• Ensure the battery is in place and replace the battery door.
Powering On & Off
To turn on the Kitchen Thermometermini, follow these steps:
• Press the power button located at the center of the faceplate.
• The Smart LED will blink blue while waiting for pairing.
To turn off the Kitchen Thermometermini, follow these steps:
• Press and hold down the power button located in the center of the
faceplate for three seconds.
• The Smart LED will illuminate solid white and will then turn off.
Auto Shut-Off:
• The Kitchen Thermometermini will stay powered on for ve minutes
before automatically turning off if there is no probe installed and it is
not paired to a smart device.
• The Kitchen Thermometermini will stay powered on for eight hours
before automatically turning off if not paired to a smart device and
the probe is installed.
• The Kitchen Thermometermini will stay powered on until the battery
is depleted if it is paired with a smart device, even if there is no
probe installed.
6
Connecting
To connect your Kitchen Thermometermini to your iPhone, iPad, iPod touch
or Android device follow these steps:
• Open Settings
• Tap Bluetooth
• Set Bluetooth to On
• While turned on, place your Kitchen Thermometermini next to your
smart device and open the iDevices Connected app. Your smart
device will automatically recognize any available iDevices products
and display them in the device manager. You can view your device
manager by tapping the iDevices logo at the top of the app.
• Select your Kitchen Thermometermini from the device manager. You
will then be sent a pairing request. Once you accept, your smart
device will pair with the Kitchen Thermometermini and you are ready
to congure your settings and start cooking!
To connect an additional Kitchen Thermometermini (or other iDevices
product) to your iPhone, iPad, iPod touch or Android device follow these
steps:
• While turned on, place your Kitchen Thermometermini (or other
iDevices product) next to your smart device and open the iDevices
Connected app.
• Tap on the gray bar located at the top of the screen to expose the
device manager. Select the product you would like to pair with
from the device manager. Your smart device will display a pairing
request. Once accepted, your smart device will pair with the
additional product and you are ready to congure your settings and
start cooking!
Mounting
• The Kitchen Thermometermini’s base is magnetic for convenient
positioning on a cool portion of your oven, stove or other magnetic
surfaces.
• The Kitchen Thermometermini can be taken out of its base, rotated
180° and set back into its base for two different viewing angles.
7
• The Kitchen Thermometermini comes with an optional magnetic
disc with an adhesive on one side. This allows the Kitchen
Thermometermini to magnetically mount on a non-magnetic surface.
The magnetic disc has a protective cover on its face to protect it
from being scratched.
To mount your magnetic disc, please follow these steps below:
• Clean the surface thoroughly where the magnetic disc will be
adhered to ensure proper bonding.
• Remove the protective lm covering the adhesive on the magnetic
disc.
• Adhere the magnetic disc to your desired surface.
• Let the magnetic disc bond to the surface at least 6-12 hours before
mounting your Kitchen Thermometermini to the disc.
• Place your Kitchen Thermometermini on the magnetic disc.
The magnetic base is not designed to withstand high heat
and it must be placed on a cool surface. If the surface is too
hot to touch, it is too hot for the Kitchen Thermometermini
base!
Probe Use
• Meat Probe Acceptable Temperature Range: -22°F to 572°F (-30ºC
to 300ºC)
• Pro Meat Probe and Pro Ambient Temperature Probe Acceptable
Temperature Range (sold on iDevicesinc.com): -22ºF to 620ºF (-30ºC
to 326ºC)
• The Meat Probe should always be inserted into the center of the
item being cooked for an accurate temperature reading.
• When using a standard Meat Probe, be sure to route the probe wire
where it will not be exposed to ames or temperatures exceeding
8
572° (300°C).
• The Pro Ambient Probe should be clipped between two grates
inside the oven. Ensure that the tip of the probe does not touch the
grates.
• The probe wrap allows for convenient storage of your probe
and is magnetic so that it can be stored under your Kitchen
Thermometermini when not in use.
The colored probe indicator is for visual identication of the
probe within the app and cosmetic purposes only. It is not
designed for heat safety.
The probe should be cleaned by hand with a dishcloth,
standard dishwashing soap and warm water. The probe is
not dishwasher safe. Take precaution not to get the probe’s
wiring wet.
Be sure to avoid water exposure to the probes’ wiring as
well as the area where the probes’ wiring meets the probe.
The probe is not waterproof and damage may result from
water exposure. The probe should never be submersed in
water.
Temperatures below -22°F or above 572°F (-30ºC or above
300ºC) will not display in the iDevices Connected app and
will cause the probe to disappear from connection.
Probe Wrap Use
To wrap your probe:
• Hold the probe wrap so that the clip segment is on the bottom left
and the iDevices logo is legible in the center of the probe wrap.
• Snap the probe into the probe wrap’s clip, ensuring that the probe’s
body follows the contour of the probe wrap and leaves a ½ inch gap
between the probe and the wire channel of the probe wrap. The tip
of the probe should be pointed downward.
9
• Wrap your probe’s wire clockwise around the probe wrap.
• When you reach the adapter end of the probe wire, it can be
inserted into the probe wrap’s wire channel to secure the wrapping.
Using the Kitchen
Thermometermini
Smart LED
The Smart LED allows the Kitchen Thermometermini to display the
connected probe temperature reading through the use of color. Below is a
list of all of the light combinations you will see on the Smart LED and their
associated meanings:
Connection
• Solid White: Powering off or reset complete
• Solid Blue: Conrms pairing of new device
• Blinking Blue: Awaiting pairing or no alarm set
Peak Preset
• Solid Green: Initial Temperature
• Solid Yellow: Target Temperature is 15° F away
• Solid Orange: Target Temperature is 5° F away
• Blinking Red: Target temperature reached
• Solid Red: Target temperature reached and alarm acknowledged
Range Preset
• Solid Green: Temperature inside range
• Blinking Red: Temperature outside range
10
Proximity Sensor
The use of Bluetooth Smart allows the Kitchen Thermometermini to sense
when a paired smart device moves in or out of range. The Kitchen
Thermometermini will automatically wake and sleep at the below distances
to conserve power:
• Sleep ~ 30 feet away
• Wake ~ 5 feet away
*Proximity function based on Bluetooth signal strength. Signal strength
is inuenced by a number of factors including the smart device
and environment.
Custom & Preset Alarms
Manage iPhone, iPad or iPod touch alarms:
If you are having issues hearing the alarms from the iDevices Connected
app, try these steps:
• Open Settings on your smart device
• Tap “Notication Center”
• Choose the iDevices Connected app and make sure to enable
notications, including “Sounds” and “Alerts”
Manage Android device alarms:
• Open Settings on your device
• Find “Apps” and search for the iDevices Connected app (This could
be located in your “Application Manager”)
• Make sure notications are enabled
Make sure the volume setting for your phone is properly set.
If your sounds are off or set at a low setting, you may not
hear the alarm properly.
Indice
Altri manuali iDevices Termometro
iDevices
iDevices Kitchen thermometer Manuale utente
iDevices
iDevices iGrill 2 Manuale utente
iDevices
iDevices Kitchen thermometer Manuale utente
iDevices
iDevices iGrill Manuale utente
iDevices
iDevices Kitchen thermometer Manuale utente
iDevices
iDevices IGRILL MINI Manuale utente
iDevices
iDevices IGRILL MINI Manuale utente
iDevices
iDevices iGrill Pro Manuale utente
iDevices
iDevices iGrill Manuale utente
iDevices
iDevices IGRILL MINI Manuale utente
