IDTECH ValueScan II Manuale utente

ValueScan IITM

Barcode Scanner

User‟s Manual

80104502-001 rev.A

FCC WARNING STATEMENT

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment

is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation of this device is subject to the following conditions:

this device may not cause harmful interference and this

device must accept any interference received, including

interference that may cause undesired operation.

CANADIAN DOC STATEMENT

This digital apparatus does not exceed the Class B limits for

radio noise for digital apparatus set out in the Radio

Interference Regulations of the Canadian Department of

Communications.

Le présent appareil numérique n‟émet pas de bruits

radioélectriques dépassant les limites applicables aux

appareils numériques de las classe B prescrites dans le

Réglement sur le brouillage radioélectrique édicté par les

ministère des Communications du Canada.

CE STANDARDS

Testing for compliance to CE requirements was performed

by an independent laboratory. The unit under test was found

compliant to class B limits of part 15 of the FCC Rules.

LIMITED WARRANTY

ID TECH warrants to the original purchaser for a period of 36

months from the date of invoice that this product is in good

working order and free from defects in material and

workmanship under normal use and service. ID TECH‟s

obligation under this warranty is limited to, at its option,

replacing, repairing, or giving credit for any product which

has, within the warranty period, been returned to the factory

of origin, transportation charges and insurance prepaid, and

which is, after examination, disclosed to ID TECH‟s

satisfaction to be thus defective. The expense of removal

and reinstallation of any item or items of equipment is not

included in this warranty. No person, firm, or corporation is

authorized to assume for ID TECH any other liabilities in

connection with the sales of any product. In no event shall ID

TECH be liable for any special, incidental or consequential

damages to purchaser or any third party caused by any

defective item of equipment, whether that defect is

warranted against or not. Purchaser‟s sole and exclusive

remedy for defective equipment, which does not conform to

the requirements of sales, is to have such equipment

replaced or repaired by ID TECH. For limited warranty

service during the warranty period, please contact ID TECH

to obtain a Return MaterialAuthorization (RMA) number &

instructions for returning the product.

THIS WARRANTY IS IN LIEU OF ALL OTHER

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR

PARTICULAR PURPOSE. THERE ARE NO OTHER

WARRANTIES OR GUARANTEES, EXPRESS OR

IMPLIED, OTHER THAN THOSE HEREIN STATED. THIS

PRODUCT IS SOLDAS IS. IN NO EVENT SHALL ID TECH

BE LIABLE FOR CLAIMS BASED UPON BREACH OF

EXPRESS OR IMPLIED WARRANTY OF NEGLIGENCE OF

ANY OTHER DAMAGES WHETHER DIRECT, IMMEDIATE,

FORESEEABLE, CONSEQUENTIAL OR SPECIAL OR FOR

ANY EXPENSE INCURRED BY REASON OF THE USE OR

MISUSE, SALE OR FABRICATIONS OF PRODUCTS

WHICH DO NOT CONFORM TO THE TERMS AND

CONDITIONS OF THE CONTRACT.

The information contained herein is provided to the user as a

convenience. While every effort has been made to ensure

accuracy, ID TECH is not responsible for damages that

might occur because of errors or omissions, including any

loss of profit or other commercial damage, nor for any

infringements or patents or other rights of third parties that

may result from its use. The specifications described herein

were current at the time of publication, but are subject to

change at any time without prior notice.

The information contained herein is provided to the user as a

convenience. While every effort has been made to ensure

accuracy, ID TECH is not responsible for damages that

might occur because of errors or omissions, including any

loss of profit or other commercial damage. The specifications

described herein were current at the time of publication, but

are subject to change at any time without prior notice.

ID TECH is a registered trademark of International

Technologies & Systems Corporation. ValueScan II and

Value through Innovation are trademarks of International

Technologies & Systems Corporation.

Introduction

Installation- Keyboard Wedge

1) Disconnect power to the terminal/computer.

2) Disconnect the keyboard cable from the back of the

terminal/computer and connect to the interface cable of

the scanner.

3) Connect the interface cable of the scanner to the

terminal/computer.

4) Turn the terminal/computer power on.

RS-232

1) Disconnect power to the terminal/computer.

2) Connect the external power supply (DC adapter) to the

interface cable of the scanner.

3) Plug the serial connector into the serial port on the back

of your computer/terminal. Tighten the two screws to

secure the connector to the port.

4) Plug the power pack into a power source.

5) Once the scanner has been fully connected, turn the

terminal/computer power back on.

USB (Simulates keyboard wedge)

1) Connect the USB cable to the terminal/computer.

2) Windows will automatically detect the USB device.

Note: If the scanner does not operate, turn off the power

immediately and check any improper connections. Go

through all of the above steps again.

Default setting

For each barcode shown as below:

V= Enabled as default setting

-= Not supported

Empty space = Not enabled at default setting

Code Type

Read

Enable

Checksum

Verification

Enable

Checksum

Transmission

Enable

Code

UPC-A

UPC-E

EAN-13

EAN-8

Code 39

＊

Interleaved 2 of 5

Industrial 2 of 5

IATA

Matrix 2 of 5

Codabar

Code 128

Code 93

V two digits

Code 11

Vone digit

MSI/Plessey

UK/Plessey

Telepen

Standard 2 of 5

GS1 DataBar

Omnidirectional

GS1 DataBar

Limited

GS1 DataBar

Expanded

China Post

Italian

Pharmacode.

ValueScan II Specification

Weight

90 g (cable not included)

Cable –K/B wedge

Straight 2.0 m

Operational

Light Source

660 nm Visible Red LED

Optical System

2048 pixel CCD

(Charge-coupled device)

Depth of Scan Field

0-180 mm

(CODE 39, 500Lux, PCS=90%, 20mils)

Scanning Width

50 mm wide @ 10mm

Scan Speed

100 scans/sec

Resolution

0.1mm (4mils) Code39,PCS=90%

Print Contrast

45% or more

ScanningAngle

Pitch: 60° Yaw: 70°

Decode Capability

Auto-discriminates all standard one

dimension barcodes

Beeper Operation

7 tones or no beep

Indicator

Green led and beep sound

Mechanical

Length

176 mm

Width-handle

40 mm

Width-head

67 mm

Depth-handle

30 mm

Depth-head

40 mm

Connector type

Crimp type female connector

Case material

ABS plastic

Cushion material

TPR

Electrical

Input Voltage

5 VDC ± 0.25V

Power - Operating

Max. 750 mW

Power - Standby

150 mW

Current - Operating

Max. 150 mA @ 5 VDC

Current - Standby

30 mA @ 5 VDC

DC Transformers

Class 2; 5VDC @ 450 mA

Agency listing

FCC Class A, CE

Environmental

Operating

Temperature

0℃to 45℃(32℉to 113℉)

Storage

-20℃to 60℃

(-4℉to 140℉)

Humidity

10% to 90% relative humidity,

non-condensing

Light Level

Up to 20000 Lux

Shock

1.5m drop onto concrete

Contaminants

Sealed to resist airborne particulate

contaminants

Ventilation

None required

Programming

method

Manual (Reading special barcode),

DOS command through RS-232

(RS-232 model)

Programmable

characteristics

Code type selection, check digit

selection, Decoding option

Transmitted character delay, Header

selection, trailer selection, message

suffix, good read beep tone and

volume, scanner trigger selection

Keyboard emulation type

(intermessage delay, keyboard type

and keyboard language)

Serial interface type (ACK/NAK,

Xon/Xoff, RTS/CTS, good read LED

control, start/stop bits)

Programming the ValueScan II Series

Scanner

To program the ValueScan II series scanner, you must scan a

series of programming barcode in the correct order. Fold out

the back cover of this manual. You will see a table of

alphanumeric barcodes, which are used to program the

various options presented.

To program each option, you must:

1. Scan the Program barcode on the parameter setting part.

2. Enter the option mode by scanning the Option Bar Code

(also on the Parameter setting part).

3. To the right of the option barcode, the necessary

alphanumeric inputs are listed. Scan these alphanumeric

entries from the back fold out page. To confirm above

steps, you must scan the Finish barcode on the back fold

out page.

4. Once you have finished programming. Scan the Exit

barcode, listed on the lower right hand corner of each

parameter setting part.

Altri manuali per ValueScan II

Indice

Altri manuali IDTECH Lettore di codici a barre

IDTECH

IDTECH Ez One Shot Manuale utente

IDTECH

IDTECH Ez One Shot Manuale utente

IDTECH

IDTECH ValueScan II Manuale di istruzioni

IDTECH

IDTECH MiniMag RS232 Manuale utente

IDTECH

IDTECH 2DScan FX200 Manuale di istruzioni

IDTECH

IDTECH EconoScan II Manuale di istruzioni

IDTECH

IDTECH 2DScan FX100 Manuale utente

IDTECH

IDTECH ValueScan II Manuale utente

IDTECH

IDTECH ValueScan III IDBB-4244MRB Manuale utente

IDTECH

IDTECH OMNI Manuale utente

IDTECH

IDTECH 30 Manuale utente

IDTECH

IDTECH BluScan Manuale utente

IDTECH

IDTECH Econoscan Manuale utente

IDTECH

IDTECH Econoscan Manuale utente

IDTECH

IDTECH Econoscan II Istruzioni operative

IDTECH

IDTECH ValueScan III Manuale utente

IDTECH

IDTECH 2DScan Manuale utente

IDTECH

IDTECH BTScan Manuale utente

IDTECH

IDTECH VersaScan II Manuale di istruzioni

IDTECH

IDTECH ValueScan II Manuale di istruzioni

IDTECH

IDTECH EconoScan II Manuale utente

IDTECH

IDTECH VersaScan II Manuale utente

IDTECH

IDTECH Econoscan Manuale utente

IDTECH

IDTECH BluScan Manuale di istruzioni

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente