IEI Technology HPCIE-Q470 Manuale utente

Half-size PICMG 1.3 CPU Card Supports 10th/11th Gen. LGA1200 Intel®

Core™ i9/i7/i5/i3, Pentium® and Celeron® Processors, Intel® Q470,

DDR4 SO-DIMM, HDMI, Dual Intel® 2.5GbE, USB 3.2 Gen 2,

SATA 6Gb/s, M.2, iAudio and RoHS

HPCIE-Q470

Quick Installation Guide

Version 1.0

February 24, 2022

Package List

HPCIE-Q470 package includes the following items:

1 x HPCIE-Q470 single board computer

1 x SATA cable

1 x QIG

Specifications

CPU:

10th/11th Generation LGA1200 Intel® Core™ i9/i7/i5/i3, Pentium®

and Celeron® processors

Chipset:

Intel® Q470

Memory:

Two 260-pin 2933 MHz dual-channel DDR4 SO-DIMM slots

supporting up to 64 GB memory

BIOS:

AMI UEFI BIOS

Graphics Engine:

10th Generation CML-S: up to Intel® UHD Graphics 630, Intel®

HD 9th Generation Display Engine based on 16 low power

execution units supporting DX2015, OpenGL 5.X and OpenCL2.x,

ES 2.0

11th Generation RKL-SXe: 12th Generation Graphics Architecture,

Intel® UHD Graphics 750, supporting 12-bit end-to-end, AV1, VP9,

HEVC 12b, HDR10, FP16

Display Output:

1 x HDMI 1.4 (up to 4096 x 2160 @ 30 Hz)

Ethernet:

LAN1: Intel® I225V 2.5GbE controller (colay with I225-LM)

LAN2: Intel® I225V 2.5GbE controller (colay with I225-LM)

External I/O Interface:

2 x USB 3.2 Gen 1 (5Gb/s) (Type-A)

1 x USB 3.2 Gen 2 (10Gb/s) (Type-C)

Internal I/O Interface:

2 x USB 2.0 (2x4 pin, p=2.0)

2 x RS-232/422/485 (2x5 pin, p=2.0) (support Auto Flow Control

over RS-485)

2 x SATA 6Gb/s (RAID 0/1 supported)

Audio:

1 x IAUDIO connector supporting IEI AC-KIT-888S audio module

(2x5 pin, p=2.0)

Front Panel:

1 x Front panel (1x10 pin, p=2.54; power LED, HDD LED, power

button, reset button)

LAN LED:

2 x LAN LED (1x2 pin, p=2.54)

Expansions:

16-lane PCIe signal from CPU via golden finger

(supporting x16, or x8 + x8, or x4 + x4 + x8)

4-lane PCIe signal from PCH via golden finger

(supporting x4, or x1 + x1 + x1 + x1)

1 x M.2 A key (2230) with PCIe Gen3 x2 & USB 2.0

1 x M.2 M key (2280/2242) with PCIe Gen3 x4 (on solder side)

Digital I/O:

1 x 12-bit digital I/O (2x7 pin, p=2.0)

SMBus:

1 x SMBus (1x4 pin, p=1.25)

I2C:

1 x I2C (1x4 pin, p=1.25)

Fan Connector:

1 x CPU fan connector (1x4 pin)

Chassis Intrusion:

1 x Chassis intrusion connector (1x2 pin, p=2.54)

Power Supply:

5V/12V ATX/AT power supply

Support AT/ATX mode

ErP/EuP compliant

Power Consumption:

[email protected], [email protected], [email protected], [email protected]

(Intel® Core™ i9-11900K CPU with 4 GB 3200 MHz DDR4

memory)

Watchdog Timer:

Software programmable support 1–255 sec. system reset

Operation Temperature: 0°C –60°C

Storage Temperature: -30°C –70°C

Operation Humidity: 5% –95%, non-condensing

Dimensions: 169 mm x 126 mm

Weight: GW:1000 g / NW:420 g

Safety: CE/FCC compliant

All the drivers and utility for the

HPCIE-Q470 are available on IEI

Resource Download Center. Type

HPCIE-Q470 and press Enter to find

all the relevant software, utilities, and

documentation. To install software

from the downloaded ISO file, mount

the file as a virtual drive to view its

content.

IEI Resource Download Center

https://download.ieiworld.com

Ordering Information

HPCIE-Q470-R10:

Half-size PICMG 1.3 CPU Card supports 10th/11th Gen. LGA1200

Intel® Core™ i9/i7/i5/i3, Pentium® and Celeron® processors, Intel®

Q470, DDR4 SO-DIMM, HDMI, dual Intel® 2.5GbE, USB 3.2 Gen 2,

SATA 6Gb/s, M.2, iAudio and RoHS

CB-USB02A-RS:

Dual port USB cable with bracket, 300mm, p=2.0

32102-000100-200-RS:

SATA power cable, MOLEX 8981-4M to SATA15P, 150mm

32205-002700-200-RS:

RS-232/422/485 cable, 200mm, p=2.0

AC-KIT-888S-R10:

Realtek ALC888S 7.1 Channel HD Audio peripheral board, RoHS

CF-115XA-R10:

High performance LGA1155/1156 cooler kit, 1U chassis compatible,

73W

CF-1156C-R20:

LGA1155/LGA1156 cooler kit, 1U chassis compatible, 45W

CF-1156D-R30:

LGA1155/LGA1156 cooler kit, 1U chassis compatible, 65W

Jumpers Setting and Connectors

LABEL

FUNCTION

J_ATX_AT1

AT/ATX power mode setting

SW_BIOS1_1

BIOS selection switch

J_CMOS1

Clear CMOS jumper

J_FLASH1

Flash descriptor security override jumper

CPU12V1

ATX CPU 12V power connector

J_AUDIO1

Audio connector

BAT1

RTC battery connector

CHASSIS1

Chassis intrusion connector

DIMM1, DIMM2

DDR4 SO-DIMM slots

DIO1

Digital I/O connector

DBG_SPI1

EC debug connector

CPU_FAN1

Fan connector

JSPI1

Flash SPI ROM connector

JEC1

Flash EC ROM connector

F_PANEL1

Front panel connector

I2C1

I2C connector

LED_LAN1

LAN1 link LED connector

LED_LAN2

LAN2 link LED connector

M2_A1

M.2 A-key slot

M2_M1

M.2 M-key slot (on solder side)

COM1, COM2

RS-232/422/485 serial port connectors

S_ATA1, S_ATA2,

SATA 6Gb/s connectors

SMB1

SMBus connector

SPK1

Speaker connector

USB2

Internal USB 2.0 connector

LAN1, LAN2

External 2.5GbE RJ-45 connectors

HDMI1

External HDMI connector

CN1, CN2

External USB 3.2 Gen 1 connectors

CON1

External USB 3.2 Gen 2 connector

J_ATX_AT1: AT/ATX Power Mode Setting

PIN NO.

DESCRIPTION

Short 1 - 2

ATX Power Mode (default)

Short 2 - 3

AT Power Mode

SW_BIOS1_1: BIOS Selection Switch

PIN NO.

DESCRIPTION

Short A - B

BIOS1: four PCIe x1 slots (default)

Short B - C

BIOS2: one PCIe x4 slot

J_CMOS1: Clear CMOS Jumper

Status

DESCRIPTION

Keep CMOS Setup

(Normal Operation)

Press

Clear CMOS Setup

J_FLASH1: Flash Descriptor Security Override Jumper

PIN NO.

DESCRIPTION

Short 1-2

Disabled (default)

Short 2-3

Enabled

USB Power SW: USB Power Setting

USB Power SW

DESCRIPTION

+5V DUAL

Power is provided in S3/S4 sleep

state (default)

+5V

Power is not provided in S3/S4

sleep state

Use the USB Power SW BIOS options to configure whether to provide power to

the corresponding USB connector(s) when the system is in S3/S4 sleep state.

This option is valid only when the above Power Saving Function (ERP) BIOS

option is disabled.

CPU12V1: ATX CPU 12V Power Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

GND

+12V

GND

+12V

J_AUDIO1 : Internal Audio Connector for IEI Audio Module

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

HDA_SYNC

HDA_BIT_CLK

HDA_SDOUT

HDA_SPKR

HDA_SDIN

HDA_RST#

HDA_VCC

HDA_GND

HDA_+12V

HDA_GND

BAT1: RTC Battery Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

VBATT

GND

CHASSIS1: Chassis Intrusion Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

+3.3VSB

CHASSIS_OPEN

DIO1 : Digital Input/Output Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

GND

VCC

Output 5

Output 4

Output 3

Output 2

Output 1

Output 0

Input 5

Input 4

Input 3

Input 2

Input 1

Input 0

DBG_SPI1: EC Debug Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

EDICS

EDIDO

EDICLK

EDIDI

GND

CPU_FAN1: CPU Fan Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

GND

+12V

FANIO

PWM

JSPI1: Flash SPI ROM Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

+3.3V

SPI_CLK

SPI_CS#

SPI_SI

SPI_SO

GND

JEC1: Flash EC ROM Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

FSCE#

VCC

FMISO

EC_DET_FLASH

FSCK

GND

FMOSI

F_PANEL1: Front Panel Connector

DESCRIPTION

PWR_LED+

PWR

LED

PWR

BTN

PWR_BTN+

PWR_LED-

PWR_BTN-

GND

HDD

LED

HDD_LED+

Reset+

RESET

HDD_LED-

Reset-

I2C1: I2C Connector

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

GND

I2C_CLK

I2C_DATA

+5V

LED_LAN1: LAN1 Link LED Connector

DESCRIPTION

+3.3V

LAN1_LED_LNK#_ACT

LED_LAN2: LAN2 Link LED Connector

DESCRIPTION

+3.3V

LAN2_LED_LNK#_ACT

COM1, COM2: RS-232/422/485 Serial Port Connectors

PIN NO.

DESCRIPTION

PIN NO.

DESCRIPTION

DCD

DSR

RXD

RTS

TXD

CTS

DTR

GND

Altri manuali per HPCIE-Q470

Indice

Altri manuali IEI Technology Computer a scheda singola

IEI Technology

IEI Technology KINO-EHL-J6412 Manuale utente

IEI Technology

IEI Technology WAFER-ULT-i1 Manuale utente

IEI Technology

IEI Technology HYPER-AL series Manuale utente

IEI Technology

IEI Technology ROCKY-4786 Manuale utente

IEI Technology

IEI Technology KINO-DQM871-i1 Manuale utente

IEI Technology

IEI Technology PCISA-6770 Series Manuale utente

IEI Technology

IEI Technology KINO-DQM871 Manuale utente

IEI Technology

IEI Technology NOVA-9152 Manuale utente

IEI Technology

IEI Technology WSB-9452 Manuale utente

IEI Technology

IEI Technology KINO-DH420 Manuale utente

IEI Technology

IEI Technology KINO-KX Manuale utente

IEI Technology

IEI Technology WSB-PV-D4251 Manuale utente

IEI Technology

IEI Technology KINO-DBT Series Manuale utente

IEI Technology

IEI Technology WAFER-PV-D4252 Manuale utente

IEI Technology

IEI Technology SPCIE-C236 Manuale utente

IEI Technology

IEI Technology KINO-DAL Manuale utente

IEI Technology

IEI Technology IMBA-8650 Manuale utente

IEI Technology

IEI Technology PM-PV-N4551/D5251 Manuale utente

IEI Technology

IEI Technology NANO-LX2 Manuale utente

IEI Technology

IEI Technology WSB-9152 Manuale utente

IEI Technology

IEI Technology WAFER-EHL-J6412 Manuale utente

IEI Technology

IEI Technology KINO-CV-D25501 Manuale utente

IEI Technology

IEI Technology ICE-BDE-T7 Manuale utente

IEI Technology

IEI Technology KINO-TGL-U Manuale utente

Manuali Computer a scheda singola popolari di altre marche

WIN Enterprises

WIN Enterprises PL-80910 Manuale utente

AXIOMTEK

AXIOMTEK SBC81206 Series Manuale utente

Embest

Embest SOM-PH8800 Manuale utente

SeaLevel

SeaLevel SBC-R9 Manuale utente

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuale utente

WinSystems

WinSystems PPM-LX800-G Manuale utente

GIGAIPC

GIGAIPC QBiX-PPC Series Manuale utente

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuale utente

Commell

Commell FS-978 Manuale utente

GIGAIPC

GIGAIPC QBiP-8665A/ Manuale utente

VersaLogic

VersaLogic Python EBX-11 Manuale utente

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuale utente

CompuLab

CompuLab SB-A510 Manuale utente

Boser

Boser HS-7321 Manuale utente

Premier Farnell

Premier Farnell Embest SBC8530 Manuale utente

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuale utente

Aaeon

Aaeon UP Manuale utente

Portwell

Portwell WUX Series Manuale utente