IET Labs 1232-A Guida alla risoluzione dei problemi

Model 1232-A

-AP Tuned Amplifier

and

Null Detector

User and Service Manual

♦PRECISION INSTRUMENTS FOR TEST AND MEASUREMENT ♦

TEL: (516) 334-5959 • (800) 899-8438 • FAX: (516) 334-5988

www.ietlabs.com

IET LABS, INC.

Copyright © 2005 IET Labs, Inc.

1232-A im/June 2005

formerly manufacturer by

GenRad

Long Island, NY • Email: [email protected]

♦PRECISION INSTRUMENTS FOR TEST AND MEASUREMENT ♦

TEL: (516) 334-5959 • (800) 899-8438 • FAX: (516) 334-5988

www.ietlabs.com

Long Island, NY • Email: [email protected]

IET LABS, INC.

iii

WARRANTY

We warrant that this product is free from defects in material and workmanship and, when properly used, will

perform in accordance with applicable IET specifications. If within one year after original shipment, it is found

not to meet this standard, it will be repaired or, at the option of IET, replaced at no charge when returned to IET.

Changes in this product not approved by IET or application of voltages or currents greater than those allowed by

the specifications shall void this warranty. IET shall not be liable for any indirect, special, or consequential

damages, even if notice has been given to the possibility of such damages.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUD-

ING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR

ANY PARTICULAR PURPOSE.

vii

WARNING

OBSERVE ALL SAFETY RULES

WHEN WORKING WITH HIGH VOLTAGES OR LINE VOLTAGES.

Dangerous voltages may be present inside this instrument. Do not open the case

Refer servicing to qulified personnel

HIGH VOLTAGES MAY BE PRESENT AT THE TERMINALS OF THIS INSTRUMENT

WHENEVER HAZARDOUS VOLTAGES (> 45 V) ARE USED, TAKE ALL MEASURES TO

AVOID ACCIDENTAL CONTACT WITH ANY LIVE COMPONENTS.

USE MAXIMUM INSULATION AND MINIMIZE THE USE OF BARE

CONDUCTORS WHEN USING THIS INSTRUMENT.

Use extreme caution when working with bare conductors or bus bars.

WHEN WORKING WITH HIGH VOLTAGES, POST WARNING SIGNS AND

KEEP UNREQUIRED PERSONNEL SAFELY AWAY.

CAUTION

DO NOT APPLY ANY VOLTAGES OR CURRENTS TO THE TERMINALS OF THIS

INSTRUMENT IN EXCESS OF THE MAXIMUM LIMITS INDICATED ON

THE FRONT PANEL OR THE OPERATING GUIDE LABEL.

Indice

Altri manuali IET Labs Attrezzature da laboratorio

IET Labs

IET Labs 1865-FluidTester Guida alla risoluzione dei problemi

IET Labs

IET Labs HRRS SERIES Guida alla risoluzione dei problemi

IET Labs

IET Labs 1404 Series Manuale utente

IET Labs

IET Labs W10MT3A Manuale utente

IET Labs

IET Labs SRac Series Guida alla risoluzione dei problemi

IET Labs

IET Labs GenRad 1403 Series Manuale utente

IET Labs

IET Labs 1408 Series Manuale utente

IET Labs

IET Labs HARS-LX Guida alla risoluzione dei problemi

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Conviron

Conviron GEN1000-GE Manuale utente

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente