iFan IF402 Manuale utente
iFAN DESK FAN 16” TABLE FAN WITH AIR CIRCULATOR
IF402
Parts & Description s
LIST OF COMPONENTS
1.
Front Grille
8.
Fan Head (containing Motor)
2.
Grille Ring with Grille Clip
9.
Swing Button
3.
Blade Cap
10.
Speed Buttons
4.
Fan Blade
11.
Main Body
5.
Guard Mounting Nut
12.
Base Cover
6.
Back Grille
13.
Base
7.
Motor Shaft
14.
Screws
④ ⑤ ⑥$$$$$$$$$ ⑦ ⑧$
① ②$
③$
⑨$
⑩$
⑪$
⑫$
$
⑬$
!
⑭!
$
$
HOW TO ASSEMBLE s
Warning: DO NOT operate the fan with any of its parts unassembled. The entire
assembled unit works as a single appliance. The fan must only operate in the upright
position. Any other position will be hazardous.
1. Unpack all parts from the package and place them on the floor.
2. Holding the
⑬"
Base (with the
⑫"
Base Cover attached on top), insert the
⑪"
Main
Body onto the
⑬"
Base. Align the four holes in the
⑪"
Main Body with the
⑬"
Base.
3. Insert the
⑭!
Screws into the four holes at the bottom of the
⑬"
Base, making sure
to keep the
⑪"
Main Body in position. Tighten the
⑭!
Screws firmly.
4. Assemble the
⑥"
Back Grille,
①!
Front Grille and the
④!
Fan Blade
!
on the
⑧"
Fan
Head as described below:
• Holding the Space Pin, unscrew the
③
Blade Cap by turning clockwise &
⑤"
Guard Mounting Nut by turning anti-clockwise.
Blade Cap
!↻!
Turn clockwise to unscrew
Guard Mounting Nut ↺!Turn anti-clockwise to unscrew
Space Pin
• Insert the
⑥"
Back Grille through the
⑦"
Motor Shaft, making sure that the
three locking pins are placed into their holes of the
⑥"
Back Grille.
• Screw the
⑤"
Guard Mounting Nut to the
⑧"
Fan Head by turning it clockwise.
Secure the
⑥"
Back Grille to the
⑧"
Fan Head by tightening the
⑤"
Guard
Mounting Nut clockwise.
• Insert the
④!
Fan Blade through the
⑦"
Motor Shaft. Wiggle the Wedge
Groove at the back of the
④!
Fan Blade onto the Space Pin of the
⑦"
Motor
Shaft.
• Secure the
④!
Fan Blade to the
⑦"
Motor Shaft by tightening the
③
Blade
Cap anti-clockwise.
↺ Turn anti-clockwise
• Ensuring the logo at the front of the
①!
Front Grille is positioned properly,
attach the
①!
Front Grille to the
⑥"
Back Grille and secure them by turning
the screw of the
②
Grille Clip at the bottom of the Grille Ring.
Grille Ring with Grille Ring Clip
Front Grille
Back
Grillee
Warnings s
ATTENTION :
Read this booklet carefully as it contains important instructions for a safe installation,
use and maintenance.
Important instructions to be kept for future reference.
The following basic precautions should always be followed when using electrical
appliances:
1. Read all instructions before using the appliance.
The Appliance
2. This appliance must be used only for the purpose it was expressly designed; any
use NOT complying with the instructions contained in the manual is considered
inappropriate and dangerous. The manufacturer is NOT responsible for possible
damages caused by the inappropriate and/or unreasonable use.
3. The installation/assembly of the appliance will be made in accordance with the
indications of the manufacturer. A wrong procedure may cause damages to
persons, animals or objects, for which the manufacturer cannot be considered
responsible.
4. Before use, check the integrity of the appliance and power cable. DO NOT operate
the appliance when its Motor Unit is damaged. In case you are not sure, contact
a qualified person. If the power cable is damaged, it must be replaced by the
manufacturer or its service agent, or a qualified technician in order to avoid a shock
hazard.
5. Before powering the appliance make sure the rating (voltage and frequency)
corresponding to the grid and the socket is suitable for the plug of the appliance,
and that the wall socket is properly grounded. This appliance is fitted with an earth
wire for extra safety.
6. DO NOT power the appliance using multiple sockets. If possible, avoid the use of
adapters and/or extension cables; if their use is absolutely necessary, use only
materials in compliance with the current safety regulations and according to the
electrical parameters of the adapters.
7. The appliance must NOT be switched on using external timers and/or other remote
control appliances which are not specified in this manual.
8. Only use original components & accessories (e.g. Front & Back Grilles, Fan Blade,
Blade cap, Guard Mounting Nut, Poles, Base, etc.) provided by the manufacturer.
Any non-original component or accessory NOT recommended by the
manufacturer (including, but not limited to, Front & Back Grilles, Fan Blade, Blade
cap, Guard Mounting Nut, Poles, Base, etc. made by other manufacturers or by
the same manufacturer but for other models of the same capacity or otherwise)
may cause injuries to persons or damage to the appliance.
9. The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out
of the reach of children or disabled persons since they represent potential sources
of danger.
Location
10. This appliance is NOT suitable to be used or stored near heat sources (open flame,
ovens, heaters, stoves, etc.) and/or in an explosive environment (in the presence
of flammable substances such as gas, vapour, mist or dust, in atmospheric
conditions when, after ignition, the combustion is spread in the air). Items
containing these substances should never be placed in the appliance, and never
be used to clean the appliance in order to avert the risk of fire or explosion.
11. The appliance should NOT be placed on a surface, or in the vicinity of, objects
which can be damaged by heat, such as carpets or plastics. DO NOT locate
multiple portable socket outlets or power supplies at the bottom or rear of the
appliance. When using the appliance, the surface that the appliance is placed
upon as well the surface immediately above (e.g. a wooden cabinet above the
appliance), may become hot. If the appliance is operated on wooden furniture, use
a protective pad to prevent damage to delicate finishes.
12. Place the appliance at a proper distance from the objects or surrounding walls
making sure that its functioning will NOT cause accidental damages. There should
be at least 10 cm of free space from the back, left & right sides, and at least 20 cm
the top of the appliance. Never put things on top of the appliance.
13. Avoid placing the power cable on abrasive or sharp surfaces or in positions where
it can be damaged easily. The cable must NOT be placed under carpets, or
covered with throw rugs, runners or similar. Arrange the cable away from the high
traffic area, and where it will NOT be tripped over.
14. DO NOT operate the fan next to an open window while it is raining. Rainwater
splashing onto the fan may cause an electric shock.
15. DO NOT use or store the appliance outdoors. Store and use the appliance only
indoors, or in any case, protected from weathering such as rain, direct radiation of
the sun and dust.
Operation
16. If you are using the appliance for the first time, you should:
a. Clean the exterior parts of the fan thoroughly with warm water & detergent with
a non-abrasive sponge and wipe dry. DO NOT use metal scouring pads. Make
sure that the Motor Unit DOES NOT come into contact with water.
b. Check that the Fan Grilles and Fan Blade are NOT damaged.
c. Place and use the appliance on a horizontal, stable and dry surface. Damage
may occur if the appliance is placed on an incline or decline.
d. Assemble the appliance fully before plugging it into the wall socket.
e. To turn ON : Press the Speed Button to the fan speed (Low – ‘1 / 2 / 3’ – High)
you desire.
f. Tilt the Fan Head or Grille upwards or downwards to the desired position to
adjust the angle of the fan.
g. Pushing down the Swing Button on the Fan Head will make the fan oscillate
side to side, sweeping an arc across the room. To stop the fan from oscillating,
pull up the Swing Button on the Fan Head.
h. To turn OFF : Press the Speed Button to the fan speed ‘0’.
i. Make sure to remove any label or protective sheet which may prevent its
proper functioning.
DO NOT:
• cover the appliance during functioning;
• insert objects or body parts (including clothing and hair) inside the protection
cover of the appliance to avoid personal injury or damage to the machine when
the appliance is in operation;
• attempt to force the fan blades to turn or stop the blades from turning, which
may lead to the motor overheating. If the motor is operating, but the Fan Blades
do not move, switch the appliance off;
• touch the inside of the fan while it is operating. The blades are rotating at very
high speeds, which may lead to injury to your fingers and hands;
• press the Speed Buttons too forcefully;
• use the appliance near curtains or textiles;
• use the appliance to dry wet clothes or use the appliance in a damp
environment;
• use any of the following agents as a cleaner: gasoline, thinners, or benzene;
• operate the appliance for more than 6 hours without turning it off for at least 30
minutes to let the appliance cool down for a total usage of 12 hours a day –
failure to heed this warning may result in motor failure;
• leave the appliance unsupervised during operation.
17. During operation, DO NOT touch the appliance with wet body parts, and it is
recommended to have between you and the standing surface, an isolating element
(for example, wearing shoes with rubber soles).
18. DO NOT soak the Motor Unit in water or other liquids, wash it under the tap, or let
any liquid flow into the internal casing of the appliance to prevent electric shock.
In case of accidental fall in water, DO NOT try to take it out, but first switch the
appliance off.
19. Plug and unplug the power cable firmly holding it with dry hands. Always unplug
the power cable to avoid overheating and avoid stretching it (DO NOT pull it, tug
it or use it to drag the appliance to which is connected). Before unplugging the
appliance, press the Speed Button to the fan speed ‘0’ and switch the wall socket
off.
20. Switch the appliance off and unplug the power cable of the appliance if it is NOT
used for a long period, before storing, assembling & disassembling, cleaning or
performing any maintenance operation. Before storing, cleaning or performing any
maintenance operation, leave to cool for at least 30 minutes.
21. In case of malfunction or anomaly during the functioning, switch the appliance off
immediately, turn off the power and check the cause of the anomaly, if possible,
with the support of a qualified person.
22. If smoke is observed coming out of the appliance, switch the appliance off
immediately.
23. This appliance is NOT intended for commercial use but to be used in households
and similar applications, such as:
• Staff kitchen areas in shops, offices and other working environments;
• By clients in dormitories, hotels, motels and other residential environments;
• Bed and breakfast type environments.
24. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
NOT play with the appliance. Cleaning and user maintenance shall NOT be made
by children unless they are older than 8 and supervised. Keep the appliance and
its cable out of reach of children less than 8 years old.
25. Save these instructions.
Safety Features s
A Thermal Fuse is installed in the Fan Head. If ever the motor overheats, the Thermal
Fuse will be activated and will cut off electric current to the important appliance.
Indice
Altri manuali iFan Fan
