IFM Electronic O5D10 series Manuale utente

Operating instructions

Photoelectric distance sensor

O5D10x

80000261 / 00 07 / 2013

Contents

1 Preliminary note��3

1�1 Symbols used ��3

1�2 Warning signs used ��3

2 Safety instructions ��3

3 Functions and features ��5

3�1 Applications ��5

4 Installation��5

4�1 Installation conditions ��5

5 Operating and display elements ��5

6 Electrical connection��6

7 Settings��6

7�1 The sensor is to switch when the object is detected��6

8 IO-Link ��7

8�1 General information ��7

8�2 Device-specific information��7

8�3 Parameter setting tools��7

9 Operation��7

10 Maintenance, repair and disposal��7

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference�

1.2 Warning signs used

WARNING

Warning of serious personal injury�

Death or serious irreversible injuries may result�

2 Safety instructions

• Please read this document prior to set-up of the unit� Ensure that the product is

suitable for your application without any restrictions�

• Improper or non-intended use may lead to malfunctions of the unit or to unwan-

ted effects in your application� That is why installation, electrical connection,

set-up, operation and maintenance of the unit must only be carried out by

qualified personnel authorised by the machine operator�

• In case of malfunction of the unit please contact the manufacturer� If the unit is

tampered with and/or modified, any liability and warranty is excluded�

• The unit conforms to the standard EN 61000-6-4� The unit may cause radio

interference in domestic areas� If interference occurs, the user must take

appropriate remedial actions�

WARNING

Visible laser light; laser protection class 2�

Use of controls or adjustments other than those specified herein may result in hazardous

radiation exposure� Damage to the retina is possible�

►Do not stare into the laser beam!

►Apply the enclosed labels (laser warning) in the immediate vicinity of the unit�

►Adhere to the caution and warning notes on the product label�

►Use the enclosed label for the power supply cable�

Label for supply cable

D-45128 Essen

Product label

CAUTION

LASER RADIATION

DO NOT STARE INTO BEAM

max. POWER

≤ 4.4mW

λ = 650nm

PULSE 1.3ns

AVOID EXPOSURE

LASER RADIATION EMITTED

FROM THIS APERTURE

CLASS 2 LASER PRODUCT

21 CFR PART 1040

IEC 60825 - 1:2007

AVOID EXPOSURE

LASER RADIATION EMITTED

FROM THIS APERTURE

3 Functions and features

The unit is used as an optical distance sensor�

3.1 Applications

• The optical distance sensor measures distances between 0�03 and 2 m�

• It has a background suppression of up to 20 m�

• The switching outputs are antivalent�

The distance between the sensor and the background must be limited to

max� 20 m by the customer� Otherwise the measured value may be ambi-

guous.→4.1Installationconditions

4 Installation

4.1 Installation conditions

►Install the unit so that the object to be detected is within a measuring range of

0�03��2 m�

Any object between the set switch point and a distance of 20 m from the sensor is

suppressed�

Reflecting objects in the direct beam path of the sensor - also in the range

> 20 m – are to be avoided by the customer� Otherwise the measured

values may be ambiguous�

5 Operating and display elements

1: 3-digit alphanumeric display

2: Range +

3: Range -

6 Electrical connection

The unit must be connected by a qualified electrician�

►The national and international regulations for the installation of electri-

cal equipment must be adhered to�

►Voltage supply according to EN 50178�

►Disconnect power�

►Connect the unit as follows:

DC PNP

2 1

























4: OUT1 = normally open / IO-Link

2: OUT2 = normally closed

Core colours of ifm sockets:

1 = BN (brown), 2 = WH (white), 3 = BU (blue), 4 = BK (black)

7 Settings

7.1 The sensor is to switch when the object is detected

►Position the object�

►Press [+] to increase the range�

> The set distance value is shown flashing in the display�

> The yellow LED lights when the object is detected�

►Press [-] to decrease the range�

> The set distance value is shown flashing in the display�

> During operation, the currently detected distance value is shown in the display�

8 IO-Link

8.1 General information

This unit has an IO-Link communication interface which requires an IO-Link-

capable module (IO-Link master) for operation�

The IO-Link interface enables direct access to the sensor values and parameters

and provides the possibility to set the parameters of the unit during operation�

In addition communication is possible via a point-to-point connection with a USB

adapter cable�

You will find more detailed information about IO-Link at www�ifm�com/uk/io-link�

8.2 Device-specific information

You will find the IODDs necessary for the configuration of the IO-Link unit and

detailed information about sensor values, diagnostic information and parameters

in the overview table at www�ifm�com/uk/io-link�

8.3 Parameter setting tools

You will find all necessary information about the required IO-Link hardware and

software (e�g� ifm LINERECORDER SENSOR ZGS210) at www�ifm�com/uk/io-link�

9 Operation

►Check whether the unit operates correctly�

> The LED lights when the switching output is switched�

> The detected distance value is shown in the display�

10 Maintenance, repair and disposal

►Keep the front pane of the sensor free from soiling�

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic material�

►Do not try to open the module enclosure� There are no user-serviceable com-

ponents inside�

Technical data and further information at www�ifm�com

Indice

Altri manuali IFM Electronic Accessori

IFM Electronic

IFM Electronic efector 300 SI5004 Manuale utente

IFM Electronic

IFM Electronic efector 300 SU8000 Manuale utente

IFM Electronic

IFM Electronic Efector160 LK3 Manuale utente

IFM Electronic

IFM Electronic efector250 E2M250 Manuale utente

IFM Electronic

IFM Electronic efector 200 OG laser Manuale utente

IFM Electronic

IFM Electronic Efectror 200 OGE2 Series Manuale utente

IFM Electronic

IFM Electronic efector 300 SU7000 Manuale utente

IFM Electronic

IFM Electronic efector100 GG507S Manuale utente

IFM Electronic

IFM Electronic efector 160 LK81 Series Manuale utente

IFM Electronic

IFM Electronic efector 160 Manuale utente

IFM Electronic

IFM Electronic PN2 Series Manuale utente

IFM Electronic

IFM Electronic LK31xx Manuale utente

IFM Electronic

IFM Electronic VSA003 Manuale utente

IFM Electronic

IFM Electronic efector150 Manuale utente

IFM Electronic

IFM Electronic O5H Manuale utente

IFM Electronic

IFM Electronic efector 410 JN2300 Guida all'applicazione

IFM Electronic

IFM Electronic PI209 Series Manuale utente

IFM Electronic

IFM Electronic efector 300 SU9004 Manuale utente

IFM Electronic

IFM Electronic Efector 200 Manuale utente

IFM Electronic

IFM Electronic efector100 GG507S Manuale utente

IFM Electronic

IFM Electronic GM701S Manuale utente

IFM Electronic

IFM Electronic O1D155 Manuale utente

IFM Electronic

IFM Electronic SM7000 Manuale utente

IFM Electronic

IFM Electronic efector 500 PI00 A Series Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manuale utente