IFM efector 200 OGS38 Series Manuale utente
Operating instructions
Through-beam sensor
OGE38x
OGS38x
7200011 / 00 11 / 2011
UK
UK
2
1 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
For the range see the type label.
2 Installation
►Install the receiver (OGE38x) and secure it to a bracket.
►Align the transmitter (OGS38x) to the receiver and secure it also to a bracket.
> Maximum range only with accurate alignment.
3 Electrical connection
►Disconnect power.
►Connect the unit as follows.
3.1 Transmitter
1
3
L+
L
pin 1 = L+ (10...30 V DC)
pin 3 = L-
(pin 4 = not connected)
(pin 2 = not connected)
3
UK
3 Receiver
PNP
L+
L
1
4
3
pin 1 = L+ (10...30 V DC)
pin 3 = L-
pin 4 = load (PNP, 200 mA)
(pin 2 = not connected)
NPN
L+
L
1
4
3
pin 1 = L+ (10...30 V DC)
pin 3 = L-
pin 4 = load (NPN, 200 mA)
(pin 2 = not connected)
4 Operation
Check whether the sensor operates correctly.
• Receiver (OGE38x): The yellow LED is lit when the switching ouptut is swit-
ched. The green LED is lit when the sensor is ready for operation.
• Transmitter (OGS38x): The green LED is lit when the sensor is ready for
operation.
5 Maintenance
►Keep the lens of the sensor free from soiling.
►For cleaning do not use any solvents or cleaning agents which could damage
the plastic material.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali IFM Accessori
IFM
IFM PN78 Series Manuale utente
IFM
IFM SB0503 Manuale utente
IFM
IFM TK61 Series Manuale utente
IFM
IFM efector200 OM Manuale utente
IFM
IFM O5E5 Series Manuale utente
IFM
IFM O5H5 Series Manuale utente
IFM
IFM LDH100 Manuale utente
IFM
IFM Efector200 OJ51 Series Manuale utente
IFM
IFM OGH3 Series Manuale utente
IFM
IFM SB4 Series Manuale utente
