IFM MFH Manuale utente
Operating instructions
Hydraulic cylinder sensor
MFH / M9H
11400612 / 0005 / 2021
GB
2
1 Preliminary note
You will find instructions, technical data, approvals and further information using
the QR code on the unit / packaging or at www.ifm.com.
1.1 Symbols used
Requirement
Instructions
Reaction, result
[...] Designation of keys, buttons or indications
Cross-reference
Important note
Non-compliance may result in malfunction or interference.
Information
Supplementary note
2 Intended use
The unit detects ferromagnetic metals (FE metals) without contact and indicates
their presence by a switching signal.
3 Mounting
3.1 MFH
M12x1-6H
12,4
10 H7
Rz 6,3
15°
≥10 711
R
1,5
90°
max
The unit can be adjusted to the piston rod via the insertion depth.
3
ATTENTION
During set-up, do not screw in the unit too deeply to avoid
mechanical damage to the unit, piston rod and cylinder.
For mounting with a fixed end stop, use units from the M9H series.
1
2
1: Piston rod
2: Piston
uMake sure that the piston rod is in
the end position to be detected.
uScrew the unit up to the end stop.
uUnscrew the unit half a turn (~ 0.5
mm) to avoid mechanical damage.
uTighten the fixing nuts with < 15
Nm.
3.2 M9H
M14x1,5 -6H
≥ 10
≥ 11
Ra 3,2
90°
uScrew the unit into an M14 thread.
uTighten with < 25Nm.
GB
4
4 Electrical connection
The unit must be connected by a qualified electrician.
The national and international regulations for the installation of electrical
equipment must be adhered to.
uDisconnect power.
uConnect the unit as specified in the data sheet / type label.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali IFM Accessori
IFM
IFM KI0058 Manuale utente
IFM
IFM efector 200 OGH Manuale utente
IFM
IFM PM16 Series Manuale utente
IFM
IFM OY Series Manuale utente
IFM
IFM OMH551 Manuale utente
IFM
IFM KB Manuale utente
IFM
IFM Efector 200 Series Manuale utente
IFM
IFM PM11 Manuale utente
IFM
IFM JN2301 Guida all'applicazione
IFM
IFM Efector 200 OJ Manuale utente
IFM
IFM SBU3 Series Manuale utente
IFM
IFM Efector 200 O4P5 Series Manuale utente
IFM
IFM Ecomat 100 EC2082 Guida
IFM
IFM OG Manuale utente
IFM
IFM PI2798 Manuale utente
IFM
IFM efector160 LR2750 Manuale utente
IFM
IFM Efector 100 GG712S Manuale utente
IFM
IFM SI 5000 Manuale utente
IFM
IFM PL205 Series Manuale utente
IFM
IFM O4E5 Series Manuale utente
