IFM DTE603 Manuale utente

Installation instructions
RFID compact unit
DTE601
DTE602
DTE603
DTE604
80282046 / 00 02 / 2019
UK

2
Contents
1 Preliminary note���������������������������������������������������������������������������������������������������4
1�1 Symbols used ������������������������������������������������������������������������������������������������4
1�2 Warnings used�����������������������������������������������������������������������������������������������4
1�3 Copyright and trademarks �����������������������������������������������������������������������������4
2 Safety instructions �����������������������������������������������������������������������������������������������4
3 Functions and features ����������������������������������������������������������������������������������������5
3�1 Configuration via Ethernet interface ��������������������������������������������������������������6
4 Items supplied������������������������������������������������������������������������������������������������������6
5 Function���������������������������������������������������������������������������������������������������������������6
5�1 Operating principle ����������������������������������������������������������������������������������������6
5�2 Overview DTE601������������������������������������������������������������������������������������������7
5�3 Overview DTE602������������������������������������������������������������������������������������������7
5�4 Overview DTE603������������������������������������������������������������������������������������������7
5�5 Overview DTE604������������������������������������������������������������������������������������������8
6 Installation������������������������������������������������������������������������������������������������������������8
6�1 General installation instructions���������������������������������������������������������������������8
6�2 Notes on ID tag mounting������������������������������������������������������������������������������8
6�3 Avoiding interference �������������������������������������������������������������������������������������8
6�4 Mechanical design�����������������������������������������������������������������������������������������9
6�5 Installation options�����������������������������������������������������������������������������������������9
6�5�1 Installation with angle bracket E80335 �������������������������������������������������9
6�5�2 Installation with mounting device E80336 ������������������������������������������10
6�5�3 Installation with fixing bars E80337 ����������������������������������������������������10
6�6 Mounting distances�������������������������������������������������������������������������������������� 11
6�7 Positioning of the ID tags����������������������������������������������������������������������������� 11
7 Electrical connection������������������������������������������������������������������������������������������12
7�1 Voltage supply PWR������������������������������������������������������������������������������������12
7�2 Ethernet �������������������������������������������������������������������������������������������������������13
7�2�1 Factory setting of the Ethernet parameters ����������������������������������������13
7�3 Functional earth connection ������������������������������������������������������������������������14
7�3�1 Mounting plate ������������������������������������������������������������������������������������14
8 Operating and display elements ������������������������������������������������������������������������15
8�1 Reset to factory settings ������������������������������������������������������������������������������15

3
UK
8�2 LED indicators ���������������������������������������������������������������������������������������������16
8�2�1 Power LEDs and signal bar ����������������������������������������������������������������16
8�2�2 LED LINK/ACT ETH 1 / ETH 2 �����������������������������������������������������������16
8�2�3 Special device LED indicators ������������������������������������������������������������17
8�3 LED indicators DTE601 �������������������������������������������������������������������������������18
8�3�1 LED SF �����������������������������������������������������������������������������������������������18
8�3�2 LED BF �����������������������������������������������������������������������������������������������18
8�4 LED indicators DTE602 �������������������������������������������������������������������������������19
8�4�1 LED Mod (module status)�������������������������������������������������������������������19
8�4�2 LED Net (network status) �������������������������������������������������������������������20
8�5 LED indicators DTE603 �������������������������������������������������������������������������������21
8�5�1 RUN LED �������������������������������������������������������������������������������������������21
8�5�2 LED ERR ��������������������������������������������������������������������������������������������21
8�6 LED indicators DTE604 �������������������������������������������������������������������������������22
8�6�1 LED SF �����������������������������������������������������������������������������������������������22
8�6�2 LED BF �����������������������������������������������������������������������������������������������22
9 Technical data����������������������������������������������������������������������������������������������������23
9�1 Data sheet ���������������������������������������������������������������������������������������������������23
9�2 Device manual���������������������������������������������������������������������������������������������23
10 Maintenance, repair and disposal��������������������������������������������������������������������23
11 Approvals/standards ����������������������������������������������������������������������������������������23
11�1 Radio approvals�����������������������������������������������������������������������������������������23
11�1�1 Overview�������������������������������������������������������������������������������������������23
11�1�2 Europe ����������������������������������������������������������������������������������������������23
11�2 EU declaration of conformity����������������������������������������������������������������������23
12 Scale drawing ��������������������������������������������������������������������������������������������������24

4
1 Preliminary note
Technical data, approvals, accessories and further information →
www�ifm�com�
1.1 Symbols used
►Instruction
> Reaction, result
[…] Designation of keys, buttons or indications
→Cross-reference
Important note
Non-compliance may result in malfunction or interference�
Information
Supplementary note
1.2 Warnings used
ATTENTION!
Kind and source of the hazard
> Possible consequences�
►Actions to refrain from�
►Measures to take�
1.3 Copyright and trademarks
© All rights reserved by ifm electronic gmbh� No part of these instructions may be
reproduced and used without the consent of ifm electronic gmbh�
All product names, pictures, companies or other brands used on our pages are the
property of the respective rights owners�
2 Safety instructions
• The device described is a subcomponent for integration into a system�
- The manufacturer is responsible for the safety of the system�
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system� This documentation
must contain all necessary information and safety instructions for the operator,

5
UK
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system�
• Read this document before setting up the product and keep it during the entire
service life�
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
• Only use the product for its intended purpose (→ Functions and features).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator�
• Protect the device and the cables against damage�
• Use the device outside petrol stations, fuel depots, chemical plants or blasting
operations�
• Do not transport and store any flammable gases, liquids or explosive
substances near the device�
• Operation of the device can affect the function of electronic devices that are not
correctly shielded�
- Disconnect the device in the vicinity of medical equipment�
- Contact the manufacturer of the corresponding device in case of any
interference�
• Because of the requirements for electromagnetic interference emissions, the
device is intended for use in industrial environments� The device is not suitable
for use in domestic areas�
• Device safety: Use the device indoors only�
3 Functions and features
The DTE60x device is composed of an evaluation unit and an integrated RFID
compact unit with the following functions:
• read and write ID tags which conform to the system without contact,

6
• DTE601: communication with the control level via PROFINET IO,
• DTE602: communication with the control level via EtherNet/IP,
• DTE603: communication with the control level via EtherCAT,
• DTE604: communication with the control level via EtherNet TCP/IP,
• can be configured via a web server�
Example applications:
• material flow control in production lines
• warehouse management by the automatic detection of stored products
• tank management, order picking or product tracking
The device may only be used under the operating conditions specified in
the data sheet�
3.1 Configuration via Ethernet interface
• 10 Mbps and 100 Mbps
• TCP/IP - Transport Control Protocol / Internet Protocol
• IT functionality: HTTP server
• M12, twisted pair
4 Items supplied
• DTE60x RFID compact unit
• Installation instructions
The device is supplied without installation and connection accessories�
In the event of incomplete or damaged items supplied, please contact ifm
electronic�
5 Function
5.1 Operating principle
The ID tags are operated passively, i�e� without battery� The energy required for
operation is supplied by the RFID compact unit�
The physical principle of the energy transfer is based on inductive coupling� The
integrated antenna coil in the RFID compact unit generates a magnetic field

7
UK
which partly penetrates the antenna coil of the ID tag� A voltage is generated by
induction that supplies the data carrier with energy�
5.2 Overview DTE601
Art� no�:
Function:
Type designation:
Operating frequency:
Type:
Max� transmitter power:
DTE601
RFID compact unit
DTRHF HLRWPNUS03
13�56 Mhz
rectangular
2 watts
Fig� 1: Overview DTE601
5.3 Overview DTE602
Art� no�:
Function:
Type designation:
Operating frequency:
Type:
Max� transmitter power:
DTE602
RFID compact unit
DTRHF HLRWEIUS03
13�56 Mhz
rectangular
2 watts
Fig� 2: Overview DTE602
5.4 Overview DTE603
Art� no�:
Function:
Type designation:
Operating frequency:
Type:
Max� transmitter power:
DTE603
RFID compact unit
DTRHF HLRWECUS03
13�56 Mhz
rectangular
2 watts
Fig� 3: Overview DTE603

8
5.5 Overview DTE604
Art� no�:
Function:
Type designation:
Operating frequency:
Type:
Max� transmitter power:
DTE604
RFID compact unit
DTRHF HLRWENUS03
13�56 Mhz
rectangular
2 watts
Fig� 4: Overview DTE604
6 Installation
6.1 General installation instructions
When mounting several RFID compact units adhere to the minimum
distances between the systems�
Installing a RFID compact unit in or on metal reduces the read and write
distance�
The immediate vicinity of powerful HF emission sources such as welding
transformers or converters can affect operation of the RFID compact units�
Available accessories: www�ifm�com
6.2 Notes on ID tag mounting
Installation of the ID tags in and on metal reduces the read and write
distances�
For positioning the ID tags the RFID compact units are marked with
an antenna symbol on the active face� It designates the middle of the
integrated antenna coil and has to correspond with the middle of the ID tag�
The orientation of the RFID compact unit axis must correspond with the
axis of the ID tag coil�
6.3 Avoiding interference
The device generates a modulated electrical field with a frequency of 13�56 MHz�
To avoid interference of the data communication no other devices generating
interference emission in this frequency band must be operated in its vicinity� Such
devices are for example frequency converters and switched-mode power supplies�

9
UK
6.4 Mechanical design
1
2
1: sensing face
2: connection (can be rotated by 270°)
Fig� 5: Mechanical design
6.5 Installation options
For installation, the following optional accessories are available�
The device can be mounted without the accessories� For installation,
please use the threaded sleeves on the back of the device� The necessary
screws are not supplied with the device�
6.5.1 Installation with angle bracket E80335
Fig� 6: Installation with angle bracket E80335

10
6.5.2 Installation with mounting device E80336
The mounting device is used to fix the device to a clamp� The following clamps
can be used:
• E21110 with a rod diameter of 12 mm
• E20795 with a rod diameter of 14 mm
• E21109 with a rod diameter of 14 mm
Fig� 7: Installation with mounting device E80336
6.5.3 Installation with fixing bars E80337
Fig� 8: Installation with fixing bars E80337
►Fix the device with fixing screws to the designated location�
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali IFM Sistema RFID









































