IFM PI1689 Manuale utente

Operating instructions
Electronic pressure sensor
PI16xx
704639 / 00 06 / 2009
UK

2
Contents
1 Preliminary note���������������������������������������������������������������������������������������������������3
1�1 Symbols used ������������������������������������������������������������������������������������������������3
2 Safety instructions �����������������������������������������������������������������������������������������������3
3 Functions and features ����������������������������������������������������������������������������������������4
3�1 Applications ���������������������������������������������������������������������������������������������������4
4 Function���������������������������������������������������������������������������������������������������������������4
4�1 Processing of the measured signals��������������������������������������������������������������4
4�2 Pressure monitoring/ analogue function ��������������������������������������������������������4
5 Installation������������������������������������������������������������������������������������������������������������6
6 Electrical connection��������������������������������������������������������������������������������������������8
7 Operating and display elements ��������������������������������������������������������������������������9
8 Menu������������������������������������������������������������������������������������������������������������������10
8�1 Menu structure���������������������������������������������������������������������������������������������10
8�2 Menu explanation ��������������������������������������������������������������������������������������� 11
9 Parameter setting ����������������������������������������������������������������������������������������������12
9�1 Parameter setting general ���������������������������������������������������������������������������12
9�2 Configuring the display (optional) ����������������������������������������������������������������14
9�3 Setting the output signal ������������������������������������������������������������������������������14
9�3�1 Setting the output function������������������������������������������������������������������14
9�3�2 Scaling the analogue value ����������������������������������������������������������������15
9�4 User settings (optional)��������������������������������������������������������������������������������16
9�4�1 Zero-point calibration��������������������������������������������������������������������������16
9�4�2 Setting the damping for the analogue signal ��������������������������������������16
9�5 Service functions �����������������������������������������������������������������������������������������16
9�5�1 Reading the min�/max� values for the system pressure����������������������16
9�5�2 Reset all parameters to the factory setting �����������������������������������������16
10 Operation���������������������������������������������������������������������������������������������������������17
10�1 Read the set parameter values �����������������������������������������������������������������17
10�2 Fault indication ������������������������������������������������������������������������������������������17
10�3 Cleaning of the filter cover�������������������������������������������������������������������������17
11 Scale drawing �������������������������������������������������������������������������������������������������18

3
UK
Preliminary note1
Symbols used1.1
►Instruction
> Reaction, result
[…] Designation of buttons, switches or indications
→Cross-reference
Important note
Non-compliance can result in malfunctions or interference�
Safety instructions2
Read this ducument before installing the unit� Ensure that the product is suita-•
ble for your application without any restrictions�
Non-adherence to the operating instructions or technical data can lead to•
personal injury and/or damage to property�
Inallapplicationscheckcomplianceoftheproductmaterials(→chapter12•
Technical data) with the media to be measured�
ForunitswithcULusapprovalandthescopeofvaliditycULus→chapter6•
Electrical connection�
12 Technical data��������������������������������������������������������������������������������������������������18
12�1 Setting ranges �������������������������������������������������������������������������������������������20
13 Factory setting �������������������������������������������������������������������������������������������������21

4
Functions and features3
The pressure sensor detects the system pressure of machines and installations�
Applications3.1
Type of pressure: relative pressure
Order no. Measuring range Permissible
overload pressure Bursting pressure
bar PSI bar PSI bar PSI
PI1693 -1���25 -14�4���362�7 100 1 450 350 5 070
PI1694 -1���10 -14�5���145 50 725 150 2 175
PI1695 -1���4 -14�5���58 30 435 100 1 450
PI1696 -0�124���2�5 -1�8���36�24 20 290 50 725
mbar PSI bar PSI bar PSI
PI1689 5���100 -0�073���1�45 4 58 30 435
PI1697 -50���1 000 -0�73���14�5 10 145 30 435
PI1698 -12�4���250 -0�18���3�62 10 145 30 435
PI1699 -1 000���1 000 -14�5���14�5 10 145 30 435
MPa = bar ÷ 10 / kPa = bar × 100
Static and dynamic overpressures exceeding the indicated overload pres-
sure are to be avoided by taking appropriate measures�
The indicated bursting pressure must not be exceeded� Even if the bur-
sting pressure is exceeded only for a short time, the unit can be destroyed�
NOTE: Risk of injury!
Function4
Processing of the measured signals4.1
The unit displays the current system pressure�•
It generates 1 output signal according to the parameter setting�•
OUT analogue signal 4���20 mA (20���4 mA)
Pressure monitoring/ analogue function4.2
The analogue signal can be set�
[OU2] defines whether the set measuring range is provided as a 4���20 mA•
signal ([OU2] = [I]) or a 20���4 mA signal ([OU2] = [InEG])�

5
UK
Scaling can also be set by means of the teaching process or by entering a value
for the ASP and AEP parameters�
By teaching the analogue start point (tASP) or setting the parameter ASP you•
define the measured value at which the output signal is 4 mA (20 mA at [InEG])�
By teaching the analogue end point (tAEP) or setting the parameter AEP you•
define the measured value at which the output signal is 20 mA (4 mA at [InEG])�
Minimum distance between [ASP] and [AEP] = 25 % of the final value of the mea-
suring range (turn down 1:4)�
Factory setting Measuring range scaled
P = system pressure, MAW = initial value of the measuring range, MEW = final value of
the measuring range
1
: [OU2] = [I];
2
: [OU2] = [InEG]
The output signal is between 4 and 20 mA ([OU2] = [I]) or between 20 and 4 mA
([OU2] = [InEG])� It is also indicated:
System pressure above the measuring range:•
output signal > 20 mA if [OU2] = [I]�-
output signal between 4 and 3�8 mA if [OU2] = [InEG]�-
System pressure below the measuring range:•
output signal between 4 and 3,8 mA if [OU2] = [I]�-
output signal > 20 mA if [OU2] = [InEG]�-

6
Installation5
Ensure that no pressure is applied to the installation while mounting or
removing the sensor� Please note: Display „0%“ does not mean that the
system is free of pressure!
Horizontal mounting recommended for high medium temperatures�
To monitor a tank:
If possible, mount the sensor at►
the bottom of the tank (1)� Do not
mount near an agitator (2), a pump
(3) or in the spout of the tank (3)�
Screw the sensor into a G 1 pro-►
cess fitting�
Tighten the sensor with a spanner�►
Tightening torque: 20 Nm��
A = freely rotatable housing

7
UK
The unit is adaptable for various G 1 process fittings� G 1 process adapters to be
ordered separately as accessories�
Mounting
�
1 3
2
Screw the unit into the adapter (A) until it is hand-tight (fig� 1)� Do not damage►
the sealing chamfers�
Clamp sensor and adapter into a clamping device (B); (fig� 2)� Tighten the►
clamping device only slightly so that the adapter does not warp�
Tighten the sensor using a spanner �►
Tightening torque: 20 Nm�
Fix the unit + adapter to the process connection by means of a coupling nut, a►
clamp flange or the like (C); (fig 3)�
NOTE: A guarantee for a long-term stable sealing of the metal seal is only valid for
once-only mounting�
Welding adapter
First weld the adapter, then mount the sensor� Follow the instructions included►
with the adapter�

8
Electrical connection6
The unit must be connected by a qualified electrician�
The national and international regulations for the installation of electrical
equipment must be adhered to�
Voltage supply to EN50178, SELV, PELV�
For units with cULus approval and the scope of validity cULus: The device shall
be supplied from an isolating transformer having a secondary Listed fuse rated as
noted in the following table�
Overcurrent protection
Control-circuit wire size Maximum protective device rating [A]
AWG [mm2]
22 0�32 3
20 0�52 5
18 0�82 7
16 1�3 10
14 2�1 20
12 3�3 25
Disconnect power�►
Connect the unit as follows:►
Normal operation Programming operation
Pin 1 Ub+
Pin 3 Ub-
Pin 4 (P) P = communication via EPS / FDT interface
Pin 2 (OUT2) analogue output for system pressure
Core colours of ifm sockets:
1 = BN (brown), 2 = WH (white), 3 = BU (blue), 4 = BK (black)

9
UK
Operating and display elements7
1 to 8: Indicator LEDs
LED 1 to LED 6 = system pressure in unit of measurement as indicated on the label�-
LEDs 5 to 6 not used for units with 3 adjustable units of measurement�
LED 7 not used�-
LED 8 not used�-
9: Alphanumeric display, 4 digits
Indication of the current system pressure�-
Indication of the parameters and parameter values�-
10: Set pushbutton
Setting of the parameter values (scrolling by holding pressed, incremental by pressing-
briefly)�
11: Mode/Enter pushbutton
Selection of the parameters and acknowledgement of the parameter values�-

10
Menu8
Menu structure8.1
Questo manuale è adatto per i seguenti modelli
8
Indice
Altri manuali IFM Sensore di sicurezza

IFM
IFM R1D Series Manuale utente

IFM
IFM PI299 Series Manuale utente

IFM
IFM LI213 Series Manuale utente

IFM
IFM UGR502 Manuale utente

IFM
IFM PN701 Series Manuale utente

IFM
IFM OJ50 laser Series Manuale utente

IFM
IFM OJ51 Series Manuale utente

IFM
IFM SBZ224 Manuale utente

IFM
IFM efector 160 LK7 Manuale utente

IFM
IFM UGT515 Manuale utente


























