Ikelite 200DL Manuale utente
Product Registration
Please register your product at ikelite.com within 15 days of purchase.
Our product registration database is the best way for us to contact you
in the event of a product update.
200DL Underwater Housing for Canon EOS 5D Mark
III, 5D Mark IV, 5DS, 5DS R DSLR
Product Number 71702
50DL Underwater Housing for Canon EOS 5D Mark
III, 5D Mark IV, 5DS, 5DS R DSLR
Product Number 73702
2
About this Product
Thank you for your purchase of Ikelite equipment. Please read this
instruction manual completely before attempting to operate or dive
with this product. Please visit ikelite.com to register your product to
receive information on any updates, notices, or recalls pertaining to
your equipment.
Included in the Box
• Housing
• Main O-ring # 0132.61
• Port O-ring # 0132.45
• Zoom Gear Retainer # 75900
• Tool for Zoom Gear Retainer # 0945.06
• Body Cap # 0200.92
• Waterproof Bulkhead Cap # 9104.5
• Silicone Lubricant # 0184.2
• Base with Left-Hand Quick Release Handle # 4077.67
3
Important Notices
»This housing requires a compatible Lens Port for waterproof
operation. The housing is not waterproof without a Lens Port
attached.
»A bulkhead cap or sync cord must be attached to the housing
for waterproof operation. Never submerge the housing without
either a sync cord or waterproof bulkhead cap attached.
»To prevent salt build-up and sticking controls, turn the camera
off and submerge the sealed housing in clean, freshwater.
Operate the controls several times each while underwater to
ush out any residue.
»Never leave a housing in a rinse tank, even if it is the only
system in the tank. Most catastrophic oods happen when the
user walks away from a housing while it is in the rinse tank.
»Do not use alcohol, cleaning agents, spray lubricants, Rain-X,
or other solvents on the housing or lens port. Use of an
incompatible chemical compound can damage the plastic and
o-rings, and may result in leaking.
4
Contents
Product Registration 1
About this Product 2
Included in the Box 2
Important Notices 3
Getting to Know Your Housing 6
Vacuum Valve 8
Accessory Port 8
Installing an Accessory via the Accessory Port 9
Setting Up Your Camera 10
Pre-Installation Checklist 10
Setting Up Your Housing 11
Attaching the Base with Quick Release Handle 11
Opening the Housing 11
Inserting the Camera 12
Attaching the Hotshoe 13
Closing the Housing 14
Installing an Optional Zoom Gear (not included with housing) 15
Attaching the Lens Port or Port Extension
17
Final Check 18
Entering the Water 18
Shooting Under Water 19
Setting Up An External Strobe 20
About Sync Cords 20
TTL Strobe Exposure 20
Attaching a Sync Cord 21
Constant-On Video Lighting 22
Maintenance 22
Post-Dive 22
Lens Port 23
5
Storage 23
Lubricant 24
Push buttons 24
Control Shafts 25
Troubleshooting 27
Spare Parts 29
Limited Warranty 30
Service and Repairs 30
Contact Us 31
6
Getting to Know Your Housing
IKELITE
Shutter Button
Lid Snap
Accessory Port
Hole Plug
AF/Drive Mode
Meter/White Balance
Lens Release
Vacuum
Valve
Plug
7
= Featured on 200DL Product Number 71702 Only
12
10
14
Zoom
Control
Super-eye
Viewnder
73702 features
a clear window
AF-ON
Button
Main Dial
Power Switch
ISO Speed
Strobe Bulkhead
and Cap
Mode Dial
INFO Button
Erase Button
Playback Button
Index/Magnify/Reduce
RATE Rating Button
Creative Photo/Comp.Playback
MENU Button Live View Shooting/Movie
Start/Stop
Quick Control Button
Setting Button
AF Area Button
AE Lock
AF Point
Q. Control Dial
8
Vacuum Valve
Your housing features a Vacuum Valve to check watertightness before
a dive. Use of the vacuum valve requires a pump, sold separately.
»DO NOT remove Vacuum Valve Plug unless you are plugging
in a Vacuum Pump.
»DO NOT submerge the housing without the vacuum valve
plug installed. The housing will NOT be waterproof without the
vacuum valve plug installed.
Vacuum Valve
Vacuum Valve
Plug
Nut
Accessory Port
Your housing features one 1/2-20 threaded Accessory Port which
may be used for attachment of factory optional or aftermarket housing
accessories. Visit ikelite.com for an updated list of factory optional
accessories
9
IKELITE
Accessory Port
Hole Plug
Installing an Accessory via the Accessory Port
1. Remove the Hole Plug using an 11/16” open end wrench.
2. Check the accessory tting o-ring sealing area. Check o-ring and
housing o-ring sealing area. All should be clean and free of hair,
sand, or other debris.
3. Lightly lubricate o-ring with Ikelite lubricant. Use ONLY Ikelite
lubricant. Other manufacturer lubricants can cause the o-ring to
swell.
4. Carefully screw in and tighten accessory tting. The accessory port
features a 1/2-20 threaded hole. Make sure your tting is the same
thread pattern. DO NOT cross-thread. DO NOT overtighten.
5. After installing an accessory, pressure test the housing by diving
without a camera inside.
NOTICE: Your Ikelite housing warranty DOES NOT extend
to cover the attachment of aftermarket housing accessories by
3rd parties. Warranty DOES cover factory optional accessories
attached by certied Ikelite service technicians.
»Do not remove the Accessory Port Hole Plug unless you are
installing a compatible accessory.
10
Setting Up Your Camera
Pre-Installation Checklist
1. Insert a fully charged camera battery.
2. Insert a properly formatted memory card.
3. Set Mode Dial to “M.” Set shutter speed to 1/60th second or
1/125th second for fast moving subjects. Set aperture to F8 for
general photography or F22 for macro photography (close-ups).
Adjust settings as needed for each shooting situation.
4. When using an external ash, set External Speedlight control to
“Flash ring - Enable.”
Altri manuali per 200DL
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Ikelite Accessori per fotocamere
Ikelite
Ikelite 6114.50 Manuale utente
Ikelite
Ikelite 47140 Manuale utente
Ikelite
Ikelite Nikon 7600 Manuale utente
Ikelite
Ikelite DS160 Manuale utente
Ikelite
Ikelite 6047 Manuale del proprietario
Ikelite
Ikelite 6110.93 Manuale utente
Ikelite
Ikelite 6270.03 Manuale del proprietario
Ikelite
Ikelite m10 Manuale utente
Ikelite
Ikelite 6243.40 Manuale del proprietario
Ikelite
Ikelite 6973.06 Manuale utente
Ikelite
Ikelite 9304.53 Manuale utente
Ikelite
Ikelite 6970.07 Manuale utente
Ikelite
Ikelite AF35 AutoFlash Manuale utente
Ikelite
Ikelite WD-4 Manuale utente
Ikelite
Ikelite 6950.12 Manuale utente
Ikelite
Ikelite 6116.15 Manuale utente
Ikelite
Ikelite 9306.35 Manuale utente
Ikelite
Ikelite Flex Arm Manuale utente
Ikelite
Ikelite 6210.61 Manuale del proprietario
Ikelite
Ikelite 6871.2 Manuale utente
