Ikelite m10 Manuale utente
Product Registration
Please register your product at ikelite.com within 15 days of purchase. Our
product registration database is the best way for us to contact you in the
event of a product update or recall.
Underwater Housing for Canon EOS M10
Product Number 6973.10
2
Table of Contents
PREPARATION.......................................................................P. 3
SPECIFICATIONS - no camera installed ................................P. 4
INCLUDED in the BOX...........................................................P. 4
Parts of the Housing - Front View............................................P. 5
Parts of the Housing - Back View ............................................P. 6
HOUSING and CAMERA SETUP STEPS..............................P. 7
STEP 1 - Camera Setup..........................................................P. 7
STEP 2 - Opening the Housing ...............................................P. 8
STEP 3 - Install Camera in Housing........................................P. 8 - 10
STEP 4 - Closing the Housing.................................................P. 11
STEP 5 - Attaching the Lens Port............................................P. 11
STEP 6 - Entering the Water ...................................................P. 12
Removing the Camera from the Housing ................................P. 12
STROBE COMPATIBILITY and USE .....................................P. 13
Strobe Compatibility ................................................................P. 13
Fiber Optic Cord Compatibility.................................................P. 13
Attach Fiber Optic Cord to the Housing...................................P. 14
Using Fiber Optic Strobes .......................................................P. 15
Using the Camera’s Built-in Flash ...........................................P. 15
RECOMMENDED ACCESSORIES and ATTACHMENTS .....P. 15
SPARE PARTS .......................................................................P. 16
MAINTENANCE......................................................................P. 16
Lens Port .................................................................................P. 16
O-ring Storage.........................................................................P. 16
3
PREPARATION
This product has been water pressure tested at the factory and is
depth rated to 200 ft (60m). Thoroughly inspect and immerse the empty
housing completely in water before installing a camera. If any fogging
occurs or droplets of water enter the housing, do not install a camera.
Clean the main housing o-ring and retest to make sure that the housing is
watertight. Refer to the Troubleshooting section, page 24.
Please read your camera manual thoroughly to have a full understanding of
each camera function.
If you are new to underwater photography, be sure to read the Photo Tips
section, page 23.
Table of Contents - continued
Lubricant..................................................................................P. 17
Housing Maintenance..............................................................P. 17 - 18
Control Maintenance ...............................................................P. 19 - 22
PHOTO TIPS...........................................................................P. 23
TROUBLESHOOTING............................................................P. 24 - 26
CUSTOMER SUPPORT..........................................................P. 26
LIMITED WARRANTY ............................................................P. 30
RETURNING PRODUCTS FOR SERVICE.............................P. 31
SPECIFICATIONS - no camera installed
• 200 ft (60m) depth rating
• Controls for all camera functions except Mobile Device Connection Button
• Slightly negative buoyancy in fresh water. Actual buoyancy varies
depending on choice of lens and port.
• 1/4-20 thread tray mounting with 3-inch (76mm) spacing
• Weight 3.2 lb (1.4 kg)
• Dimensions 9.75 x 6.5 x 6.5 in (247 x 165 x 165 mm)
• ABS-PC, acrylic, and acetyl construction
INCLUDED in the BOX
• Housing
• Accessory Package (includes 1cc silicone lube, hex head wrench and extra
control tips)
4
Parts of the Housing - Front View
5
Shutter
Button Front Dial Fiber Optic Ports
1/4-20 External Tray Mounts
Movie Button Flash Pop Up SwitchPower Button
Lens Release Button
6
Parts of the Housing - Back View
54
MENU
INFO
2
3
6
7
1
8
1. Mode Dial
2. MENU Button
3. Exp. Comp./Single-erase/Up
4. AE Lock / Left Button
5. Q.SET / Center Button
6. Macro / Right Button
7. INFO / Down Button
8. Playback / Right Button
1. Insert a fully charged camera battery
2. Insert and properly format a memory card.
3. Set Rec.Mode to “Av” or “M.”
4. Set Image Review to “4 sec.”
5. Set AF operation to “ONE SHOT” and AF method to “1-point AF.”
6. Set Continuous AF and AF-assist beam to “Off.”
7. Set ISO to “200.”
8. Set Metering Mode to “Center Weighted Avg.”
9. In Flash Control: Set Flash ring to “On” and Red-eye reduc. to “Off.”
10. Set Power Saving - Auto Power Down to “Off.”
11. Set Time Zone, Date/Time.
12. Set White Balance to “AWB.” Always use auto white balance (AWB) when
using a strobe/ash. When recording video, AWB can still be used, but
for more accurate and consistent colors we recommend setting “Custom
White Balance” .
- Camera settings not mentioned should be set to the user’s preference.
- Some settings may change based on your shooting environment.
7
HOUSING and CAMERA SETUP STEPS
Step 1 - Initial Camera Setup
8
Step 2 - Opening the Housing
Lid Snaps have a Lock.
1. Push Lid Snap Locks forward and lift as shown. Open opposing Lid Snaps
simultaneously. Keep pressure on the Lid Snaps so they do not y open
quickly. Some Lid Snaps have a lot of spring tension once they go over
center, so keep a rm grip on each Lid Snap. Lid Snaps may also be
opened one at a time.
2. Remove the Housing Back.
Step 3 - Install Camera in Housing
1. Make sure the camera battery is fully charged and a SD memory card is
inserted into the camera. Save existing photos on a separate storage
device before formatting SD Card.
2. Pull top housing control knob up for more clearance.
3. The Mounting Plate is secured to the inside bottom of the housing. The
camera Mounting Tray slides into the Mounting Plate. Use your index
nger and thumb to pull the Mounting Tray away from the Mounting Plate,
Diagram A, page 9. Use your other thumb to apply opposite pressure
against the bottom of the housing to assist in removal of the Tray if
necessary.
Push Forward
Lid
Snap
Lock
Lift
9
Step 3 - Install Camera in Housing - continued
Diagram A
Mounting Tray Mounting Plate
Pull to Remove
4. Using a coin or at head
screwdriver (preferred), secure
the camera Mounting Tray
to the camera tripod mount,
Diagram B. Tighten camera
rmly to avoid movement on
tray. The Mounting Tray only
attaches one way with the
Mounting Tray Tab to the back
of the camera.
An additional 1/4-20-inch tray
hole allows attachment to a
land tripod stand.
Diagram B
Tighten here
Mounting Tray Tab
Step 3 - Install Camera in Housing - continued
10
Diagram C
Push Camera and
Mounting Tray all
the way forward into
Mounting Plate
Mounting Plate
5. Gently slide the camera with Mounting Tray back into the Mounting Plate,
Diagram C, page 10. Using your thumbs, push against the Mounting Tray
until it stops sliding forward into the Mounting Plate. Give the Tray an extra
push to make sure it is properly seated all the way forward in the Mounting
Plate and no housing controls are in the way.
Indice
Altri manuali Ikelite Accessori per fotocamere
Ikelite
Ikelite Cannon HV-20 Manuale del proprietario
Ikelite
Ikelite Nikon Coolpix P2 Manuale utente
Ikelite
Ikelite PowerShot A610-A620 Manuale utente
Ikelite
Ikelite DSC-W200 Manuale utente
Ikelite
Ikelite 5510.45 Manuale utente
Ikelite
Ikelite Digital Housing Manuale del proprietario
Ikelite
Ikelite 200DLM/A Manuale utente
Ikelite
Ikelite S610 Manuale del proprietario
Ikelite
Ikelite 6961.85 Manuale utente
Ikelite
Ikelite DS51 Manuale utente
Ikelite
Ikelite Canon 6081 Manuale del proprietario
Ikelite
Ikelite 6231.31 Manuale del proprietario
Ikelite
Ikelite 6241.34 Canon A3400 IS Manuale del proprietario
Ikelite
Ikelite 6184.93 Manuale utente
Ikelite
Ikelite 6870.70 Canon EOS 70D Manuale utente
Ikelite
Ikelite SLR-DC Housing Manuale utente
Ikelite
Ikelite POWERSHOT G11 Manuale utente
Ikelite
Ikelite 6973.06 Manuale utente
Ikelite
Ikelite SLR-DC Housing Manuale utente
Ikelite
Ikelite 75342 Manuale utente
