Ikelite 4301.3 Manuale utente
Thank you for your purchase of Ikelite equipment. Please read this
instruction manual completely before attempting to operate or dive
with this product.
TTL C nverter f r Nik n DSLR with
Ikelite C nnect r (Versi n 2)
Pr duct Number 4301.3
I n s t r u c t i n M a n u a l
Table of Contents
In luded in the Box ..............................................................3
Camera Compatibility............................................................3
General Information ..............................................................4
Strobe Compatability ............................................................5
Conne ting the Adapter ........................................................5 - 6
Swit hing between TTL and Manual ....................................6
Customer Support ................................................................7
Returning Produ ts for Servi e ..........................................7
Spare Parts ............................................................................Ba k Page
Limited Warranty ..................................................................Ba k Page
2
T
T
L
O-ring
Knurled Ring
Waterproof Bulkhead Cap
Ikelite Connector
Ikelite Bulkhead
IKELITE #0184.1
Silicone Lube
Ikelite Connector
Protector
Silicone Lubricant
In luded in the Box
3
- ikon D2X, D3, D4
- ikon D40, D50, D60, D70, D70s, D80, D90
- ikon D200, D300, D300s
- ikon D600, D610, D700, D750
- ikon D800, D810
- ikon D5000, D5100, D5200, D5300
- ikon D7000, D7100, D7200
- Fuji S5 Pro
Camera Compatibility
The TTL Converter is equipped with a simple rotating switch that allows
toggling between TTL and manual exposure.
Exposure compensation is OT provided through the Adapter, but may
be accessed through a camera button or the camera's built-in menu.
Proper operation and TTL exposure requires use of a current-model
Ikelite DS strobe - see Strobe Compatibility, Page 5.
Use of this TTL Converter requires an Ikelite 5-pin electrical bulkhead
strobe connector and TTL hotshoe. If you are unsure whether your
housing meets these requirements, please contact the housing
manufacturer. Wiring diagrams for our Ikelite connectors can be found at
ikelite. om.
One or two strobes may be connected to the Converter using an
Ikelite-to-Ikelite single or dual sync cord. Use of two strobes requires a
dual sync cord. Two strobes cannot be controlled by individual separate
Converters even if the housing is equipped with two bulkhead
connectors.
TTL Converters are not usable with non-Ikelite strobes or non-DS series
Ikelite strobes.
Due to hardware changes and risk of cord damage, we are unable to
modify existing 4301, 4301.2, 4302, or 4302.2 Converters to the newest
TTL protocol.
Please also note that strobe serial number requirements differ from the
original ikon TTL Converter - see Strobe Compatibility, Page 5.
The Ikelite TTL Adapter is NOT compatible with the following ikon
Cameras; D-100, D-1X, D-2H.
General Information
4
5
Use Adapter with Ikelite DS Strobes O LY. If using an older DS50 or
DS125 strobe, see Strobe Compatibility above.
1. Make sure all components are dry.
2. Remove Waterproof Bulkhead Cap and Connector Protector, Page 3.
3. Clean and lightly lubricate the threads and o-ring on the male Ikelite
connector. Use O LY Ikelite lube. Other brand lubricants can cause the
o-ring to swell and not seat properly. Check o-ring for cracks or nicks.
4 ote the positioning of the receptacles and pins. Properly align the
Ikelite Connector and insert it into the housing’s Ikelite-style bulkhead;
hand-tighten Knurled Ring.
5. Connect your Ikelite Sync Cord to the Adapter Bulkhead. Hand tighten the
Knurled Ring on the Sync Cord until there is no in-out movement
between the Ikelite Sync Cord Connector and Adapter bulkhead.
Hold the adapter’s knurled ring when tightening the syn ord.
CAUTIO : Do not use tools on, or over-tighten Knurled Rings.
Single or Dual Ikelite sync cords can be attached.
Dual strobe use requires dual sync cord.
Two strobes cannot be operated by independent adapters.
Conne ting the Adapter - referen e Diagram A, Page 6
AF35 ......................no
DS50 ......................above serial number 75510 with update
DS51 ......................above serial number 78700
DS160, DS161........all
on-Ikelite ..............no
Strobe Compatibility
6
The Knurled Ring on the TTL Adapter’s black delrin pod has a White Dot,
Diagram A.
The Knurled Ring can be rotated clockwise or counterclockwise to align
the White Dots for TTL or Manual operation.
The DS Strobe must be set to TTL mode for the Adapter to provide
TTL operation.
Swit hing between TTL and Manual
T
T
L
Ikelite Connector
Knurled Ring
Ikeli te Sync Cord Connector
Knurled Ring
Adapter Knurled Ring
To Housing
Bulkhead
Diagram A
Adapter
Bulkhead
Conne ting the Adapter - ontinued
White Dot
7
For the separate international customs documentation form that you
complete to accompany the shipment, please state or designate that the
enclosed products were originally manufactured in the USA and are
being returned to the manufacturer for repair service. Value of the
equipment listed for customs purposes should be zero.
Returning Produ ts for Servi e - outside the United States
Returning Produ ts for Servi e
Ikelite is most interested in performing any service to ensure that all
products perform as intended. Evidence of purchase date must be
provided to obtain warranty service.
o prior authorization is required. You may return directly to us or
through your dealer. Please include a brief description of the problem,
any relevant email correspondence, and/or instructions on what you
want us to do. Always include name, shipping address, email address,
and phone number inside of the package. Send postage paid to:
Ikelite Underwater Systems
Attention: Servi e Department
50 West 33 Street
Indianapolis, IN 46208 USA
No reimbursements for postage paid will be issued.
You may also want to insure the package.
Ikelite Underwater Systems
Servi e Department
50 West 33rd St.
Indianapolis, IN 46208 USA
Email: [email protected]
Phone: 317-923-4523
Customer Support
Ikelite Underwater Systems
50 West 33rd Street
Indianapolis, IN 46208 USA
ikelite. om
4301.3_TTL_Converter_ ikon_Ike_to_Ike_Version_2_01-1015
© 2015 Ikelite Underwater Systems
This Ikelite product is warranted against any manufacturing defects for a
period of one (1) year from the original date of purchase. Defective
products should be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return to customer
postage paid. All other claims of any nature are not covered. Except as
mentioned above, no other warranty expressed or implied applies to this
Ikelite product.
Limited Warranty
0301.12 ..........Connector Protector for Ikelite plug
9104.5 ............Waterproof Bulkhead Cap
0118 ................O-ring
0184.2 ............silicone lubricant 2cc recloseable tube
Spare Parts
Indice
Altri manuali Ikelite Accessori per fotocamere
Ikelite
Ikelite DLM200 Manuale utente
Ikelite
Ikelite 69531 Manuale utente
Ikelite
Ikelite 6241.25 Manuale utente
Ikelite
Ikelite Wide Angle Port M67 Guida rapida
Ikelite
Ikelite DSC-P150 Manuale utente
Ikelite
Ikelite FinePix F50fd Manuale operativo e di manutenzione
Ikelite
Ikelite C-750 Manuale utente
Ikelite
Ikelite 6961.09 Manuale utente
Ikelite
Ikelite 6210.09 Sony DSC-WX9 Manuale del proprietario
Ikelite
Ikelite Stylus 1030 SW Manuale del proprietario
Ikelite
Ikelite 6146.07 Manuale utente
Ikelite
Ikelite 5510.45 Manuale utente
Ikelite
Ikelite SD870 IS Manuale del proprietario
Ikelite
Ikelite 6147.16 Manuale utente
Ikelite
Ikelite 6148.70 Manuale utente
Ikelite
Ikelite 6043 Manuale del proprietario
Ikelite
Ikelite PowerShot A710IS Manuale utente
Ikelite
Ikelite 6801.70 Manuale utente
Ikelite
Ikelite Canon S5 IS Manuale utente
Ikelite
Ikelite 4077.01 Scheda tecnica
