Ikelite 6843.72 Manuale utente
Underwater TTL Housing for Sony Alpha a7 II,
a7R II, a7S II
Product Number 6843.72
Instruction Manual
Thank you for your purchase of Ikelite equipment. Please read this instruction
manual completely before attempting to operate or dive with this product.
Please refer to the back page of this manual to register your Ikelite product.
2
Table of Contents
IMPORTANT INFORMATION .................................................P. 3 - 4
INCLUDED in the BOX...........................................................P. 5
SPECIFICATIONS - no camera installed ................................P. 5
PREPARATION.......................................................................P. 6
Parts of the Housing - Side View.............................................P. 6
Parts of the Housing - Front View............................................P. 7
Parts of the Housing - Back View ............................................P. 8
HOUSING and CAMERA SETUP STEPS..............................P. 9
STEP 1 - Initial Camera Settings.............................................P. 9 - 10
STEP 2 - Opening the Housing ...............................................P. 11
STEP 3 - Install Camera in Housing........................................P. 11 - 12
STEP 4 - Attach Hotshoe.........................................................P. 13
STEP 5 - Closing the Housing.................................................P. 14
STEP 6 - Final Check ..............................................................P. 14
STEP 7 - Housing Usage ........................................................P. 15
STEP 8 - Entering the Water ...................................................P. 15
Removing the Camera from the Housing ................................P. 15 - 16
STROBE COMPATIBILITY and CONNECTION.....................P. 16
Strobe Compatibility ................................................................P. 16
Housing Conversion Circuitry..................................................P. 16
Attach Ikelite Sync Cord to the Housing and Strobe ...............P. 17
ZOOM CLAMP and GEAR SLEEVE INSTALLATION ...........P. 18 - 20
Manual Focusing .....................................................................P. 20
LENS PORTS..........................................................................P. 21
3
Table of Contents - continued
Installing the Lens Port............................................................P. 21 -22
RECOMMENDED ACCESSORIES and ATTACHMENTS .....P. 23 - 24
SPARE PARTS .......................................................................P. 25
MAINTENANCE......................................................................P. 25 - 30
PHOTO TIPS...........................................................................P. 31
TROUBLESHOOTING............................................................P. 32 - 34
CUSTOMER SUPPORT..........................................................P. 34
LIMITED WARRANTY ............................................................P. 35
RETURNING PRODUCTS FOR SERVICE.............................P. 35
PRODUCT REGISTRATION...................................................Back Page
IMPORTANT HOUSING INFORMATION
- Your housing is setup to accept the Sony a7R II and a7S II camera models.
If you are using the a7 II model, remove the existing camera tray marked
a7R II and replace it with the camera tray marked a7 II. Also, remove the
adhesive backing from the thin foam frame (included in box) and place the
frame over the existing foam frame on the housing back. Lastly, remove the
washer from under the knob for the Mode Dial control, page 7.
- Due to differences in lens and control placement, this housing is only
compatible with the newer “Mark II” version Alpha 7 series cameras.
This housing requires the addition of a compatible Lens Port for waterproof
operation. Lens Port not included. Go to ikelite.com for Lens Port options.
IMPORTANT HOUSING INFORMATION - continued
- This housing features an integrated TTL circuit that is automatically
powered by any DS-series strobe. Only Ikelite DS strobes are capable of
powering the circuitry. Exposure compensation in TTL mode is supported
using the camera’s built-in control. For manual ash operation, move the
switch on the back of the housing Tray Mount to the left or “M” position, as
noted above the switch.
SEA&SEA, INON, and Nikonos strobes must be used in manual exposure
modes only.
- We recommend turning the camera on BEFORE placing it in the housing.
To turn the camera on AFTER it is placed in the housing, lift and rotate the
housing ON/OFF knob, so the White Dot is in the 9 o’clock position from
the back of the housing. Push the knob back down and rotate clockwise to
turn on. The White Dot will line up with the 2 small dots on the top of the
housing as the camera is activated. DO NOT continue rotating knob once
the camera has been activated; doing so could damage the camera switch.
To turn the camera off AFTER it is placed in the housing, lift and rotate the
housing ON/OFF knob so the White Dot is in the 1 o’clock position. Push
the knob back down and rotate counter clockwise to turn camera off. The
White Dot will line up with the 2 small dots on the top of the housing as
the camera is being deactivated. DO NOT continue rotating knob once the
camera has been deactivated; doing so could damage the camera switch.
- The external housing tray may be easily removed for transport, cleaning or
storage. Use a at head screwdriver to remove the 2 screws at the base of
the housing to detach the tray. We recommend removal and rinsing after
each dive trip to avoid corrosion associated with saltwater.
4
5
SPECIFICATIONS - no camera installed
• 200 ft (60m) depth rating
• All important camera functions are accessible
• Controls are not provided for AF/MF/AEL switch lever, Control wheel, or
Diopter Adjustment Dial
• Ikelite bulkhead connector with integrated TTL circuitry
• Near neutral buoyancy in freshwater. Actual buoyancy varies depending on
choice of lens and port
• Weight 5 lb (2.3 kg) not including tray + handles
• Dimensions 9.1 x 7.1 x 6.1 inches (230 x 180 x 150 mm)
INCLUDED in the BOX
• Housing
• Aluminum tray
• Left-Hand Quick Release Handle with rubberized grip
• Port hole cover (installed)
• Waterproof bulkhead cap (installed)
• 5509.27 Universal zoom set up to 2.8-inch diameter
• 5509.28 Universal zoom set 2.8 to 3.0-inch diameter
• Silicone lubricant 1cc tube
• Micro-ber lens cloth
• Sony a7 II conversion package
6
PREPARATION
This product has been water pressure tested at the factory and is depth
rated to 200 ft (60 m). Thoroughly inspect and immerse the empty
housing completely in water before installing a camera. If any fogging
occurs or droplets of water enter the housing, do not install a camera.
Clean the main housing o-ring and retest to make sure that the housing is
watertight. Refer to the Troubleshooting section, page 32.
Please read your camera manual thoroughly to have a full understanding of
each camera function.
If you are new to underwater photography, be sure to read the Photo Tips
section, page 31.
Parts of the Housing - Side View
Lid-Snap
External Tray Mount
Finger Grip
Shutter Button
C1 Button
Parts of the Housing - Front View
IKELITE
7
Front
Dial
ON/OFF Switch
Mode Dial / Lock Button
Zoom Knob
Bulkhead Connector
1/4-20 Light Accessory Mount
Quick
Release
Push
Button
Exposure Compensation Dial
C2 Button
Accessory
Port
Lens Release
Button
8
Parts of the Housing - Back View
1
2
3
1110
6
4
8
9
12
13 14
MENU START/
STOP
Fn
C3
DISP
5
7
ISO
1. MENU BUTTON
2. Super-eye Viewnder
3. C3 (Custom 3) Button
4. Rear Dial
5. AF/MF / AEL Button
6. Movie START/STOP Button
7. Fn Button
8. DISP Display Button
9. Self-Timer/Down Cursor
10. SET Button
11. ISO / Right Cursor
12. Down Cursor
13. Playback Button
14. Delete Button
Accessory
Port
Bulkhead Connector
9
HOUSING and CAMERA SETUP STEPS
Step 1 - Initial Camera Settings
- Insert a fully charged battery.
- Set Mode Dial to “A” Aperture Priority. Manually adjust aperture setting
to achieve the best exposure for your shooting conditions. The shutter
speed will be locked at 1/30th-1/60th second. If a faster shutter speed is
desired or you are NOT using an external strobe, set Mode Dial to “M”
Manual mode to manually adjust both aperture and shutter speed settings.
- In MENU settings:
Set Image Size to highest preferred setting.
Set Drive Mode to “Single Shooting” and Flash Mode to “Fill-ash.”
Set Red Eye Reduction to “Off.”
Set Focus Mode to “Single-shot AF” and Focus Area to “Center.”
Set AF Illuminator to “Off” and ISO to “200.”
Set Metering Mode to “Center” and White Balance to “Auto AWB.” Always
use auto white balance (AWB) when using a strobe/ash. When recording
video or still photos without a strobe, AWB can still be used, but for more
accurate and consistent colors we recommend setting Custom manual
white balance for each working depth. Custom manual white balance is also
recommended when using a color lter and no ash.
Set DRO/Auto HDR, Center Lock-on AF & Smile/Face Detect to “OFF.”
Set SteadyShot to “On” and Steadyshot Adjust. to “Auto.”
- In CUSTOM MENU settings,
Set Auto Review to “5 Sec.”
Set Eye-Start AF to “Off.”
Set FINDER/MONITOR to “Monitor”. This option turns off eye-piece
automation and must be set, otherwise, the camera will sense the housing
back and shut off the LCD screen transferring picture view to the optical
viewnder.
Step 1 - Initial Camera Settings - continued
- In SETUP MENU settings:
Set Pwr Save Start Time to “5 min.”
* Allothercamerafunctionsnotmentionedshouldbesettotheuser’s
preference.
10
Altri manuali per 6843.72
1
Indice
Altri manuali Ikelite Accessori per fotocamere
Ikelite
Ikelite 46072 Manuale utente
Ikelite
Ikelite 6182.14 Manuale utente
Ikelite
Ikelite 5610.02 Manuale utente
Ikelite
Ikelite 6148.23 Manuale utente
Ikelite
Ikelite DLM200 Manuale utente
Ikelite
Ikelite 5509.71 Manuale utente
Ikelite
Ikelite 5516.69 Manuale utente
Ikelite
Ikelite Digital RebelXTi 400D Manuale operativo e di manutenzione
Ikelite
Ikelite 6973.07 Manuale utente
Ikelite
Ikelite S520 Manuale del proprietario
Ikelite
Ikelite DSC-W200 Manuale utente
Ikelite
Ikelite Wide Angle Port M67 Guida rapida
Ikelite
Ikelite 200DLM/D Manuale utente
Ikelite
Ikelite DSC-W5 Manuale utente
Ikelite
Ikelite 6243.11 Manuale del proprietario
Ikelite
Ikelite 6060 Manuale del proprietario
Ikelite
Ikelite 200DL Manuale utente
Ikelite
Ikelite MD200 Manuale del proprietario
Ikelite
Ikelite 69621 Manuale utente
Ikelite
Ikelite 6280.22 Manuale del proprietario
