IMC EASYJET E400HP Manuale utente

Ink-jet Printer

E400HP

MANUAL

The Manual of Ink-jet Printer

Table of contents

Safety Instruction

Packing List

Technical Data

Environment/Electrical Requirement

Installation & Testing

Switch On/Off

Operation

1 “Print head management”

2. “Authority”

3 “disk”

4.Ink look

5.Appearance

6. System information

7 “date time’

8 “calibrate”

<Print>

<Edit>

Image file

Create “bar code”

Create “date/time/serial No./ shift group

22-25

Text &Text Feature

Module operation

27-28

Frequent Troubles Elimination

29-30

The Manual of Ink-jet Printer

Declare

!Please read the manual seriously before running machine. Any mistake or damage caused by

user’s incorrect operation, shall be not on our responsibility.

!In any circumstances, the ink-jet printer shall uses the accessories and consumables (include inks

& cleaner) approved by our company. Disassemble machine without our agreement is strictly

prohibit.

!The machine we produced which includes appearance, structure, hardware and software, has

already got patent. Any piracy shall bears the legal liability.

!Our company reserves the right of final interpretation. If you have any questions, please feel free to

!Our company reserves the right of update at any moment, and unnecessary to notify the users.

!Copyright reserved by EASYJET. Any unauthorized reproduction, articles picked or other

non-approved usages shall bears the legal liability. *

NOTE:

After 5 minutes of non-use, it’ll turn on blank screen saver

automatically.

Please click or slide the screen with your figure to access.

The Manual of Ink-jet Printer

Safety Instructions

Personal Safety

!Some inks & cleaners are harmful, please installing & running machine in well ventilated conditions.

!Some inks & cleaners are flammable, keep away from all sources of heat and ignition.

Fire-extinguisher shall be equipped with nearby the machine.

!Wear safety glasses, gloves and masks when using inks & cleaners.

!In the condition of inhalation and eye contact, please flush thoroughly with water and seek medical

aid immediately.

!Turn the power off before maintenance.

!Forbid to disassemble machine without our technician’s instruction. The ink-jet printer must be

properly grounded. When connecting electricity, the cabinet is powered with high voltage to risk life.

!Only trained technicians are authorized to carry out installation, maintenance or repair.

Machine Safety

!Loading Requirement

1、Ink-jet printer shall be packaged in standard container which filled with anti-vibration materials.

2、Purge the inside and outside of print head and plug up the ink inlet. The print head shall be covered

by cap and packed by anti-vibration film to prevent from scratch.

3、Just left an empty cartridge in Ink system before loading.

!The warranty claims will not be accepted in the following situations:.

1、Print head or inks system damages caused by using unauthorized inks and cleaners.

2、Print head or inks system damages caused by replacing different types of consumable randomly.

Such as replaced oil-base inks into solvent-base inks, the two types of ink will cause chemical

reaction to damage machine.

3、Damages caused by running in unsuitable environments or electrical requirements.

4、Damages caused by non-approved disassembling and assembling.

5、The permanent damages caused by not performing schedules maintenance, or print head

scratching.

6、Damages caused by incorrect operation of non-approved people .

7、Damages caused by the Force Majeure.

Environmental Protection

Dispose of the waste inks & cleaners shall be in accordance with Local Authority Regulation. The

wastes are not allowed into the sewer system.

The Manual of Ink-jet Printer

Packing List

Name

Quantity

E400HP controller

1 PC

Ink tank System

1 PC

Print head System

1 Set

Sensor & Clip

1 PC

Stands & Fittings

1 Set

Power Cord

1 PC

Manual

1 Copy

Injector

1 PC (only used in solvent printer)

The Manual of Ink-jet Printer

Technical Data

!System: 32-bit high-speed processor

!print head: 150height, 600dpi in vertical.

!print head number: 1

!Print height from 1mm to12.7mm by one print head

!Print Lines capability: Multi-lines(up to character height)

!Line speed capability: Max.60mt/min.

!Print Information: Date, Time, Character, Photo, Shift group, Serial number and bar code.

!Storage: 100 text messages together with one 256*150bitmap.

!Operation: Color touch screen with photo menu

Edit in screen

English input

Basic drawing function

Graphical function

Module design

Independence Printing Parameter

!Display: 7inch color touch screen

!Inks: Water-based Ink.

!Inks color: red, yellow, blue, green, black, white etc.

!Through USB interface to import single color bitmap. It can be operated by mouse.

The Manual of Ink-jet Printer

Environment/Electrical Requirement

!Electrical requirement：AC, 110V±10% 50/60Hz,connect the ground cord.

!Max Power：15W (average﹤8W)

!Temperature：5-40

!Humidity：10-90%(non-condensing)

!Electromagnetic interference: far away from electromagnetic radiation zone

The Manual of Ink-jet Printer

Installation & Testing

Only trained technicians are authorized to carry out installation.

Before install, confirm the machine was stay in a solid & smooth place without electromagnetic radiation.

Installed as stipulated in manufacturer’s specification, do not change the relative position of ink system

and print head. Any special requirements, please consult the manufacturer and supplier directly.

Ink-jet Printer Installation & Testing

Pic1

1、Unpacking: open the package and move out print head, host machine, suspension pad etc.

2、Suspension Pad Installation: 1) fix pads into triangle stands in the same height. 2) adjust the three

pads so as to keep the triangle stand in vertically. 3) fasten the three screw nuts by spanner.

3、Host Machine Installation: 1) Put small steel pipes into large ones and put large steel pipes into

triangle stands, after adjusted the height, fasten the star-shape holders. 2) Put the host machine

onto the adjusted stands and collimate each other. 3) Fasten the host machine to the stands by

screws.

4、Ink-container Stand Installation: (only effective in independence ink-system): 1) Put small steel pipes

into large ones and put large steel pipes into triangle stands, after adjusted the height, fasten the

star-shape holders. 2) Penetrate the large/small aluminum block into circle pipe, and then fastened

in suitable height.

5、Print head Installation: 1)put the aluminum stick into the two-hole aluminum stand, and fastened by

star like screws. 2) Screw the print head on aluminum stick. 3) connect one side of ink tube to filter

and the other side to ink inlet.

The Manual of Ink-jet Printer

Install & Test

6、Photoelectric Sensor Installation: 1. Screw the photoelectric clip on the print head stand. 2. screw

the photoelectric sensor on the clip or other position as request, or use different types of sensor.

When using solvent-base inks, the sensor shall be fixed in front of print head.

7、Power connection: 1. Check the machine is grounded. 2 Link the power cord to the socket behind

the host machine in 110v AC power. 3.After indicator lighted up, please wait for 15 seconds to

access the system.

8、Printing Test: 1. Put the ink cartridge into the ink system in correct position. 2. Remove the cap of the

print head, and squeeze the ink cartridge to drain out the air and cleaner until no bubbles. 3. Clean up

the surface by blotting-paper. 4. Tested by blank papers(with more details see page 26).

9、Product moving position: the speed of production line shall be slower than the speed of printing. A

guide plate can be installed to receive the exactly position of product which has passed the print head.

In principal, the distance between product and print head more closer, the printing result will be

better.

10、Production Line adjustment: more details see page10.

The Manual of Ink-jet Printer

Switch on/off

!Switch on：

Checked up the power connection status before switch on. After switch on, it will enter into the operation

system within 15 seconds. Remove the print head cap and press PRINT key to start printing when using

oil-based inks.

When using solvent-base inks, please purgethe print head and drained out the dry-inks by

blotting-paper. After that, test the printing result by a blank paper.(more details see page24)

The procedure for using solvent-base inks: purge-squeeze-clean-test.

!Switch off：

Press the power button off and cover up the print head cap.

Note: Before switch off, ensured the print head in normal condition. Forbid to purge print head

gap before/after switch off! Just sealed by cap!

Indice

Altri manuali IMC Stampante

IMC

IMC EASYJET E400P Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente