Inateck BCST-70 Guida rapida

https://wiki.teltonika-gps.com/view/Inateck_BCST-70_Configuration

Inateck BCST-70 Configuration

Main Page > Accessories > Inateck BCST-70 Barcode Scanner > Inateck BCST-70 Configuration

Contents

1 Configure FM device using Teltonika configurator

2 Enable Bluetooth Pairing

3 Scanner Auto Connect Configuration

Configure FM device using Teltonika configurator

In System settings, enable Codec8 Extended1.

In GPRS settings, configure GPRS Settings and Server Settings.2.

In Bluetooth settings,3.

Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)",

otherwise Bluetooth will be disabled

Under Bluetooth Control, click Discover so it would detect devices within vicinity.

Once devices are discovered, select BCST-70-XXXX-SPP then proceed to tick Pair

After successful pairing, scanner should show under Paired Devices.

NOTE: : If in case the Scanner is not discovered, do the following steps on Bluetooth Pairing.

Enable Bluetooth Pairing

Scan “Enter Setup”a.

Scan “ Bluetooth Pairing”b.

Scan the "Exit with Save" barcodec.

Scanner Auto Connect Configuration

Fill up the “Auto Connect To External Device“ with as follows:

Select Connection Mode as, Inateck Scanner.

Enter the External MAC, can be seen on Paired Devices at the upper left corner.

Enter the External Name, can be seen on Paired Devices at the lower right corner.

Enter the External Pin, if the scanner has pin code set otherwise leave as blank.

Fill up the “Authorized Devices MAC List“ same with the External MAC.

NOTE: : It is important to fill out the auto connect so you won‘t need to Pair the device again on the

Configurator.

To receive the data to server enable corresponding BT Status IO element to Low.

NOTE: : If Scanner is connected BT Status value would be read as 2

Altri manuali per BCST-70

3

Indice

Altri manuali Inateck Lettore di codici a barre

Inateck

Inateck P7 Manuale utente

Inateck

Inateck BCST-55 Manuale utente

Inateck

Inateck BCST-20 Manuale utente

Inateck

Inateck BCST-41 Manuale utente

Inateck

Inateck BCST-43 Manuale utente

Inateck

Inateck BCST-10 Manuale utente

Inateck

Inateck BCST-54 Manuale utente

Inateck

Inateck BCST-50 Manuale utente

Inateck

Inateck BCST-40 Manuale utente

Inateck

Inateck P6 Manuale utente

Inateck

Inateck P6 Manuale utente

Inateck

Inateck BCST-33 Manuale utente

Inateck

Inateck P7 Manuale utente

Inateck

Inateck P6 Manuale utente

Inateck

Inateck BCST-40 Manuale utente

Inateck

Inateck BCST-33 Manuale utente

Inateck

Inateck BCST-73 Manuale utente

Inateck

Inateck BS02001 Manuale utente

Inateck

Inateck P7 Manuale utente

Inateck

Inateck BCST-70 Manuale utente

Inateck

Inateck BCST-52 Manuale utente

Inateck

Inateck BCST-10 Manuale utente

Inateck

Inateck BCST-55 Manuale utente

Inateck

Inateck P6 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente