User Manual
41
2.5 Ice Maker (DR160 COMBO model only)
The ice producon kit, present on the DR160 COMBO
model only, has a producon capacity of about 8kg of
ice per day. The technology used is called "pushed."
Water is frozen into cubes in a special tray and then
is "pushed" out of the tray. The ice cubes then drop
into the collecon container.
The cube produced is white with a special half-moon
shape. See photo.
To acvate the ice maker, move the stop lever to the ON posion. (see gure).
The ice maker will begin its producon cycle and, once the ice collecon tray
is full, the stop lever will raise slightly from the
accumulaon of ice, stopping the producon cycle.
Once the ice is removed, the lever will return to the
ON posion and the producon cycle will restart.
To stop ice producon, bring the stop lever to the
OFF posion as shown in the gure.
3. Maintenance
Isotherm Drawer refrigerators are equipped with closed cooling systems, which do
not require maintenance or refrigerant rells.
The compressor is specically designed for mobile applicaons and guarantees
maximum performance and durability. In the winter, the refrigerator must be stored
inside the boat, but the compressor will not work at temperatures near or below
0°C. Seasonal maintenance is limited to the cleaning of the condensing unit behind
the refrigerator. In parcular, it is necessary to brush/vacuum out all the dust that
has accumulated due to the fan. This can be done using a so brush and a vacuum
cleaner. It is important to keep the inside of the refrigerator clean by washing it
with warm water and mild soap and by drying any water/condensaon that may be
encountered.
In order to prevent damage to the electrical/mechanical components and/or the
formaon of mould, when shung o the refrigerator for extended periods of
me it is necessary to wait for the unit to defrost completely and to eliminate any
condensaon that may have formed, both inside the appliance and in the external
