Industrial Products Handle It 800 Manuale utente
Getting Started
12247 W. Fairview Ave, Milwaukee, WI 53226 · Phone (414) 453-5300 ·Toll Free (800) 236-1080
Rev A 6/13/2018
Installation
The Handle It 800 and 850 arrive fully assembled. To install, simply move the machine into an
appropriate operating area and plug directly into a 110v power source. The use of extension cords,
power strips, etc. may result in errors in machine operation.
Place the film on the spindle on the carriage and route according to the diagram on the carriage. It is
recommended that 80ga Machine Film be used for optimal performance.
Automatic Mode
The auto mode on the 800 and 850 allows the machine to perform a cycle with little effort from the
operator. The machine can be toggled between Automatic and Manual modes by pressing
Building A Cycle
There are a total of 9 customizable wrap cycles that can be saved to the machine for future use. Simply
change the parameters to suit the application, press and use and to select the slot (1-6) to
be saved and press to confirm. To load a cycle, press and select the desired slot and press
to confirm.
Using the button, the operator can toggle between 3 types of wrap cycles:
Up/Down: The pallet will be wrapped with a pass up
and a pass down of the film carriage.
Up Only: The film carriage will do a single pass
upwards, automatically stopping at the top of the
pallet. Film carriage will reset once the Start button is
pushed again.
Top Sheet: A single pass upwards will be made and
carriage will pause at the top and await application of
a sheet of plastic from the operator. Then secures the
sheet and finishes the cycle once the Start button is
pushed again.
5717 Salmen Street New Orleans, LA 70123
www.industrialproducts.com
Getting Started
12247 W. Fairview Ave, Milwaukee, WI 53226 · Phone (414) 453-5300 ·Toll Free (800) 236-1080
Rev A 6/13/2018
The following parameters can be customized to provide the optimal wrap cycle:
Playback Cycle
The playback cycle allows the operator to manually record a wrap cycle for it to be used in the future. The
carriage height and travel can be controlled, as well as the rotation of the turntable. Up to 99 steps can
be recorded on a single cycle, making it flexible for just about any situation.
To record a cycle, press and then push . Then the following buttons can be used to control the
wrap cycle: . Once the desired wrap cycle has been completed press and then push
to save it into the desired recorded program slot. This recorded program can then be accessed just
like any other wrap cycle.
Manual Mode
In instances where the machine needs to be operated manually, the operator can control the machine.
To operate the machine manually, toggle into manual mode by pressing . The carriage can be raised
and lowered by pressing and . The turntable can also be operated by pressing , if held in
for 3 seconds the turntable will keep turning on its own.
Bottom Wraps: Number of times
the bottom of the pallet is
wrapped.
Top Wraps: Number of times the
top of the pallet is wrapped
Tension: How tightly the film is
applied to the pallet.
Rotation: How fast the turntable
rotates
Up Speed: How quickly the carriage
raises.
Down Speed: How quickly the
carriage lowers.
5717 Salmen Street New Orleans, LA 70123
www.industrialproducts.com
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Industrial Products Sistema di avvolgimento con pellicola estensibile
