1/ Introduction
Overview
neoStampa is an image processor program for large format color printing (RIP) for continuous Rapport,
multiple images printing and/or for the creation of separations in film printing. It can be obtained with all three
units or separately:
With the program we can import any design in PostScript format or any other image taken from your scanner
or other programs, and scale these designs to the chosen or necessary measurements.
The program achieves the enlargement of images with maximum quality and, owing to its color correction
algorithms and the different shades available, it will present perfect results, ready to send to printers and/or
cutting machines in large format. It also allows the possibility of using ICC printer characterization profiles.
This manual covers the three modes of neoStampa 8 program: RIP, RAPPORT and FILM, as there are features
common to all three. Still, there are well differentiated sections corresponding to each printing mode.
The following features are supported by, and are compatible with neoStampa 8.
•RIP & FILM EDITION: For color and film printing.
•RAPPORT : For continuous printing.
•FILM EDITION: For film printing exclusively.
•Image formats (BMP, RLE, TIF, JPG, PCD, PSD, XJB)
•Vector/combined formats (EPS, PS, AI, PDF)
•Multichannel formats (DCS, DCS 2.0, PSD)
•Layout formats (CP4, CP5)
•RGB (supports embedded profiles)
•CMYK (supports embedded profiles)
•Grayscale (supports embedded profiles)
•LAB (CIELAB D50, 2°)
Supported colors and inks:
•Supports color combinations of up to 16 colors.
•Supported base inks: Cyan, Magenta, Yellow, Black, Golden Yellow, Orange,
Red, Violet, Blue, Green, Brown, Beige, Pink.
•Supported light inks: Up to 4 light inks of Cyan, Magenta, Yellow; 2 light
inks of Red, Green, Blue.
•Supported special inks: spot inks, dilution/penetration ink, mask ink, white
ink, metallic ink.
•Multiple inks of the same color can be configured with individual
behaviours.
