14. TIMED PROGRAMMES
In order to enter the option of setting timed programmes,
press the "minus" and "plus" buttons at the same
time. In the "Programmes" option you can set and modify
the programmes of automatically opening, closing,
unsealing and stopping specific roller blinds or groups of
roller blinds at specific times and days of the week. Thirty
two programmes are available, numbered 00-31.
Programmes can be set as "Active" or "Inactive". Channel
00 controls all channels at the same time.
Programme number
Programme status
active/inactive Day of the week
or period Time or sunrise and
sunset
Channel number / Command
To set days of the week during which the programme will
be active, enter "from" and "to" (inclusive). For example:
"Mon - Mon" means only Monday, "Sat - Sun" means
Saturday and Sunday, and "Mon - Sun" means all days of
the week. The time for the given programme to activate is
set by entering hours and minutes or sun (rise) and moon
(sunset). Minutes can be set only in multiplies of 5. To fully
define a programme, you must finally provide the channel
number from 00 to 19 (PIL-19DLT) or 99.
For this use the and buttons. The value changed is
the one indicated by the cursor (underscore).
•
Cursor position is changed with the and
buttons.
•
Pressing the "stop" button will move the cursor to the
programme number.
•
Changing programme number saves changes made to
the previous programme.
14.1. Setting a timed programme:
•
Select the number of the timed programme you wish to
set.
•
Activate the programme.
•
Set the period for the programme to operate
•
Mon – Sun means the whole week.
•
Tue – Tue means just Tuesday.
•
Time of activation with the accuracy up to 5 minutes.
•
Sun means sunrise, moon means sunset.
•
Channel number for the command to be sent.
•
Select command to be executed.
WARNING:
Times for the set programmes cannot be identical
(opening/closing times of two or more roller blinds cannot
be the same). If you want to set the same time for several
roller blinds, you must create a group by assigning it the
next free number.
WARNING:
Timed programmes will be executed only when a clock
icon is visible in the upper right corner of the display .
To turn on and off the timed programmes short press the
"clock" button.
15. REPLACING BATTERY
The remote is powered by a
CR 2450 3V battery.
To replace it, remove the cover
from the back of the remote.
The battery should be placed with "plus" upwards (towards
you).
16. DELETING
This information is available in the motor user manual or at
http://www.inel.gda.pl
Select your motor from the "user manuals" tab. The deletion
procedure is described in detail in the manual for the radio
controlled drive and controller.
You can download the document at www.inel.gda.pl
