Infinite Peripherals Infinea mPOS Plus Manuale utente
Infinea®mPOS Plus
USER MANUAL
For iPhone® 6s Plus/7 Plus/8 Plus
2
User Manual — Innea mPOS Plus
Contact Information
Mobility Sales/ Technical Support Center
Innite Peripherals, Inc.
17681 Mitchell N
Irvine, CA 92614
Toll-Free: (866) 278-7860
Ofce: (949) 222-0300
Website: ipcmobile.com
Headquarters/ Main Warehouse
Innite Peripherals, Inc.
2312 Touhy Avenue
Elk Grove Village, IL 60007
Toll-Free: (800) 278-7860
Ofce: (847) 818-1260
Fax: (847) 818-1287
Compatible Devices
Legal Notice
“Made for iPhone” means that an electronic accessory has been designed to connect specically to an iPhone and has been
certied by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards. Please note that the use of this accessory with an iOS device may affect
wireless performance.
iPhone 6s Plus, 7 Plus, 8 Plus
Trademarks
Innite Peripherals, Mobilize Your Enterprise, Linea Pro, Innea, Innea Tab, and Innea Omni are trademarks of Innite
Peripherals, Inc. All other trademarks are the property of their respective owners.
3
User Manual — Innea mPOS Plus
Table of Contents
Compatible Devices 2
Trademarks 2
Overview 4
Features 4
Accessories 4
Develop Applications 4
Technical Specifications 5
Before Using Your Infinea mPOS 6
Getting Started 6
Product Description 7
Assemble the mPOS 9
Charge the Infinea mPOS 9
Minimize Deactivation 10
Turn on the Infinea mPOS 10
Keypad and Menu Navigation 10
Operational Modes 11
System Mode Navigation 11
Info Version 11
Info Hardware 12
System Mode—Settings 12
Bluetooth Mode 13
Test Display 14
Test Keyboard 14
Test MSR 15
Test SCR 15
Test Font0 and Font1 16
Pair with a Bluetooth-Compatible Device 16
NFC LED Status Indicators 17
Scan Barcodes 18
Accept NFC Payments 18
Read Smart Cards 19
Read Magnetic Stripe Cards 19
Service the Infinea mPOS 20
SRED Information 20
Troubleshooting 21
Warranty 22
Disclaimer 22
Product Returns and Servicing 22
Symbols 23
Federal Communications Commissions 24
4
User Manual — Innea mPOS Plus
Visit our website, https://ipcmobile.com or contact your Innite Peripherals account representative for additional
information about our current and future product accessories.
Overview
The Innea mPOS Plus is designed for optimized viewing on the iPhone Plus with a hand-held PIN pad and integrated smart
card and magnetic stripe readers, offering advanced security and smart card processing capabilities.
Supporting both symmetric encryption algorithms (DES, 3DES, and AES) and asymmetric encryption (RSA), the solution
manages multiple keys simultaneously through either Master Session- or DUKPT- based processes internally. With a sleek
and stylish ergonomic design, the Innea mPOS Plus offers power and performance in a smart card and MSR-integrated PIN
pad device.
Features
(Optional) Barcode Scanner
2D high-speed imager
Magnetic Card Reader
Built-in 3-Track read head
Bi-directional reading capabilities
Minimum 1.97 in/sec swipe speed
1 million swipes mean time between failures
Bluetooth
BT version 3.0 power class 2 (optional)
BT version LE 4.2 (optional)
Battery
Rechargeable Li-ion Battery - 3.7 V/1300 mAh.
Accessories
Smart Card Reader
Support for synchronous and asynchronous smart cards
Connectors
9-pin Lightning™ Connector and 10-pin female micro-B
USB connector
10-pin female micro-B USB
Develop Applications
Software is not provided with your Innea mPOS. Please contact Innite Peripherals for Third-Party software solutions.
Integrating the Innea mPOS into your iOS application requires the use of the Innite Peripherals Universal SDK.
The SDK incorporates an API specically for developing applications to scan barcodes and other perform additional
functionality with the Innea mPOS.
For additional details about the Innite Peripheral Universal SDK, refer to the SDKs documentation. For the latest Innite
Peripheral Universal SDK, visit our developer portal, https://developer.ipcmobile.com.
5
User Manual — Innea mPOS Plus
Technical Specifications
Connectivity
Processor
Maxim USIP Professional, version IC400C
Memory
128KB of SRAM
256KB of Lockable Flash Memory
128 KB of ROM
Application Memory 8MB applicable accessible flash
Display LCD, Monochrome, 128 x 32 pixels
Compatibility iPhone 6s Plus, 7 Plus, 8 Plus
Connectivity Apple Lightning™ connector
Weight without iOS
device
188g (6.63oz)
Dimensions 145mm (l) x 68mm (w) x 27mm (h) (5.7” x 2.7” x 1.1”)
Buttons Scan button plus keypad for On/Off, OK, Up/Down, Clear, and 10 numeric keys
Port micro USB charge/sync
Electrical
Barcode scanner Newland 2D high-speed imager and supports all major 1D/2D barcodes
Battery capacity Rechargeable Li-ion 3.7V, 1330mAh
Battery Life Approximately 500 transactions per fully-charged battery
Smart card reader ISO ISO7816, EMV L1 Certified
Magnetic card
reader
3-track bi-directional read head
ISO 7810, 7811 and 7813
NFC payment
applications/
Contactless card
reader
VISA, MasterCard, American Express, Discover MiFARE Mini
MiFARE Classic 1K / 4K
MiFARE Ultra-Light / Ultra-Light-C
MiFARE Plus 2K / 4K ISO / IEC 14443 A&B ISO / IEC 15693 DESFire
FeliCa
Encryption/Key
Management
3DES, RSA 2048-bit, AES 128/256
DUKPT, Master/Session, MAC
Bluetooth BT version 3.0 power class 2 (optional)
BT version LE 4.2 (optional)
LEDs/audio 4 LEDs for transactions/status and electromagnetic buzzer
Certifications
FCC/CE, Apple MFi, PCI PTS 5x SRED, EMV L1, EMV L2, EMV L1 Contactless
Environment
Temperature Operation:
-10°C to +40°C (14°F to +104°F) without iOS device
0°C to 35°C (32°F to +95°F) with iOS device installed
Storage: -20°C to +50°C (-4F to +122°F)
Relative humidity Operation/Storage: 5% to 90%
6
User Manual — Innea mPOS Plus
Before Using Your Infinea mPOS
• Remove the unit and any included accessories from the shipping carton and verify contents against your packing list.
• Retain all packing materials, invoice, and bill of lading.
These may be required to return the unit for servicing later, or to process a claim with the carrier.
• Carefully inspect the packaging and contents for any signs of damage.
• If there are signs of damage, do not attempt to use the unit. Notify your account executive or contact Innite Peripherals. https://ipcmobile.com/
devices
• Ensure the battery is fully charged prior to initial use.
Infinea mPOS Plus (1) USB cable (1)
Getting Started
The following helps you get the Innea mPOS ready for use:
What to do Where to find the information
Connect the Infinea mPOS
Plus with your iOS device
Connect Infinea mPOS Plus with your iOS
Device
Charge your unit before
first use to ensure long
battery life
Charge Your Infinea mPOS Plus
Install software on your
iOS device for barcode
scanning and smart card
reading
Develop Applications
Power on the unit Turn On Your Infinea mPOS Plus
Note:
Box contents and part numbers may vary based on
your ordered configuration.
7
User Manual — Innea mPOS Plus
Product Description
The front panel of the Innea mPOS Plus
Smart Card Reader
Display
Keypad
NFC LED
Indicators
Magnetic
Stripe
Reader
(MSR)
Scan Button
(on each side)
Opening
for iPhone
Camera
Volume
Buttons
Barcode Scanner
NFC Label
8
User Manual — Innea mPOS Plus
Assemble the mPOS Plus
1. First, insert the bottom of the mPOS into the case.
Groove
Groove
2. Press the mPOS down rmly, and then wrap the molded edges
securely around the frame.
3. Insert the bottom of the iOS device into the mPOS grooves. See
Step 1.
4. Slide the iOS device onto the Lightning ™connector.
5. Wrap the edges of the case around all sides of the iOS device
securely.
Charge the Infinea mPOS Plus
You can charge the Innea mPOS Plus with a micro USB
adapter and USB cable or by using a charging station.
The time to fully charge a depleted unit is approximately
3 hours.
Battery Status Display Indicators
1 Line - battery level >/= 3.6V
2 Lines - battery level >/=3.7V
3 Lines - battery level >/=3.8V
4 Lines - battery level >/=3.8V
5 Lines - battery level >/=4.0V
6 Lines - battery level >/=4.1V
Outside power from USB cable or power
station - plug
Battery charges from USB cable or power
station - flash
USB - connection with iPad
During normal operations, the battery is constantly
discharging. The Battery Low message appears when
the battery level is too low to continue.
Charge the battery as soon as possible but no later
than 25 days after the message rst appears. Failure
to charge within 25 days may lead to deactivation and
deletion of your stored encryption keys. This requires
you to return the Innea mPOS to Innite Peripherals.
For help, see https://ipcmobile.com/support.
9
User Manual — Innea mPOS Plus
Minimize Deactivation
To minimize the potential for deactivation, follow all
storage and operating temperature guidelines. Refer to
Technical Specications for details.
Long term storage can cause temporarily decreased
battery capacity. In order to recover maximum
performance, it may be necessary to go through several
cycles of fully charging and discharging the battery.
When storing the device for longer than three months,
the battery should be charged every three months at a
minimum to prevent leakage, reduced performance, and
potential deactivation.
Replace the Battery
The main battery can only be replaced by Innite
Peripherals. Attempting to disassemble a SRED-
encrypted unit, renders it unusable and may void your
warranty.
Keypad and Menu Navigation
The buttons on the keypads access specic functions
and allow you to navigate through the menu options and
screens.
Note:
The keypad is ADA-compliant which means the Clear, OK, backspace,
and the number 5 keys have distinct, raised markings at the bottom
left corner of each key.
Tap the appropriate button to perform the following:
• Power to turn on the Innea mPOS Plus.
• System Mode to enter system mode from the Home page.
• Up to scroll up through the menu options.
• Downs to scroll down through the menu options.
• OK to select the active option.
• Clear to return to the previous option or exit service mode.
OK
(Select)
System
Mode
Clear
(Exit Screen)
Power
Up
Down
• To turn on the Innea mPOS, tap the Power button
on the top, right corner of the keypad.
The name and version of the Secure Boot Loader and
rmware appear.
Turn on the Infinea mPOS Plus
10
User Manual — Innea mPOS Plus
Operational Modes
Conguration, system test, and status modes for the Innea mPOS:
• System
• Service
• Application Download
Note:
Service and Application Download modes should only be accessed by Innite Peripherals. Selecting specic keys or options in these modes may render
the unit unusable and require reactivation of the Innea mPOS.
System Mode Navigation
Turn on the Innea mPOS, and then tap System Mode on the keyboard. The menu options available are:
• Info Version
• Info Hardware
• Settings
• Test Display
• Test Keyboard
• Test MSR
• Test SCR
• Test Font0
• Test Font1
Info Version
• TDEV SN displays the serial number of your unit
• USIP SN shows the USIP serial number
• USIP VER is the current USIP version
• ISBL VER is the current USIP boot loader version
• HAL VER is the current Hardware Abstraction Layer or
Hardware Annotation Layer (HAL) version
• LOAD VER current Secure Boot Loader (SBL)
• FW VER current rmware version and name
• PINUTIL indicates the current library version
• PKFA VER displays the current version of the public key used for
rmware authentication
• PKAA VER displays the current version of the public key used for
application authentication
• PKKA VER displays the current version of the public key used
for manufacturing key authentication
ld bluepad500
info version
load ver: 2.2.7.0
fw ver: 2.4.35.0
Indice
Altri manuali Infinite Peripherals Terminale touch
