InFocus LP 815 Manuale per l'uso e la cura

Altri manuali per LP 815

3

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali InFocus Proiettore

InFocus

InFocus Play Big IN82 Manuale utente

InFocus

InFocus LP770 Manuale utente

InFocus

InFocus IN3914 Manuale utente

InFocus

InFocus LP 730 Manuale utente

InFocus

InFocus LP 650 Guida per l'amministratore

InFocus

InFocus LP 600 Guida

InFocus

InFocus IN3128HD Manuale utente

InFocus

InFocus IN112x Manuale utente

InFocus

InFocus LPTM425z Manuale utente

InFocus

InFocus LP 120 Manuale utente

InFocus

InFocus SP5700 Guida

InFocus

InFocus IN5542 Manuale utente

InFocus

InFocus IN134UST Manuale utente

InFocus

InFocus IN112 Manuale utente

InFocus

InFocus LiteShow II Manuale utente

InFocus

InFocus in124 Manuale utente

InFocus

InFocus in5316HD Manuale utente

InFocus

InFocus Work Big IN1100 Manuale utente

InFocus

InFocus SP7200 Istruzioni per l'installazione e il funzionamento

InFocus

InFocus X2 multi-use perfomance Manuale utente

InFocus

InFocus LP 740 LiteMount Manuale utente

InFocus

InFocus LP530 Manuale utente

InFocus

InFocus LP 600 Manuale

InFocus

InFocus IN118HDSTa Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente

Asus

Asus ZenBeam Latte Manuale utente

Replacing the projection lamp

The lamp hour timer in the About menu counts the number of hours the

lamp has been in use. Fifty hours before the specified end of the lamp’s life,

the message “Replace lamp” briefly appears on the screen at each startup

and in the Interactive Display. After 50 additional hours, the lamp will no

longer light.Youcan order newlampmodules fromyourdealer.

1Turn off the projector and unplug the power cable.

2Wait 60 minutes to allow the projector to cool thoroughly.

3Turn the projector upside down and remove the lamp door by removing

the two screws and sliding the lamp door tabs out of the two tab bays.

4Loosen the three captive screws on the lamp module.

About menu

computer 2

network

audioin

L

computer in

trigger

monitor out

serial control

R

audioin

computer 1

USB

mouse

computer 3

I

O

turn off and unplug

the projector

wait 60 minutes

remove the screws on lamp door

loosen the screws on lamp module

WARNINGS:

• To avoid burns, allow the projector to cool for at least 60 minutes before

you replace the lamp.

• Do not drop the lamp module. The glass may shatter and cause injury.

• Do not touch the glass lamp screen. Fingerprints can obscure projection

sharpness.

• Be extremely careful when removing the lamp housing. In the unlikely

event that the lamp ruptures, small glass fragments may be generated.

The lamp module is designed to contain most of these fragments, but

use caution when removing it.

5C arefully remove the lamp module by grasping and lifting the metal

bail wire. Dispose of the lamp in an environmentally proper manner.

6Install the new lamp module, making sure that it is properly seated.

7Tighten the three screws.

8R eplace the lamp door by inserting the tabs into the tab bay s and tight-

ening the two screws.

9Plug in the power cable, press the power sw itch then press the Power

button to turn the projector back on.

10 R eset the lamp hour timer.

Resetting the lamp timer

Toresetthelamptimer,pressthedecrease volume button on the keypad

andthentheincreasevolumebuttonwithin 3 seconds.

AtthatpointtheLEDwillturngreenandyoucanpoweron the projector.

You can also navigate to the Settings>Service menu and select Lamp Reset

to reset the lamp timer.

remove module using bail wire

reset lamp time in Service menu