INNOSILICON A6 LTCMaster Manuale utente

A6 LTCMaster

USER MANUAL

INNOSILICON CONFIDENTIAL

Table of Contents

1. OVERVIEW 1

2. MINER ASSEMBLE 2

2.1 Check the miner before power on 2

2.2 Connect the PSU 3

2.3 Connect the Ethernet Cable 3

3. ENTER THE MINER CONSOLE 3

4. CONFIG THE MINER 6

5. APPENDIX 10

5.1 Modify the login password 10

5.2 Upgrade the firmware 10

INNOSILICON CONFIDENTIAL

INNOSILICON A6 LTCMaster

High Efficient LTCMaster

INNOSILICON CONFIDENTIAL

1. OVERVIEW

INNOSILICON CONFIDENTIAL

A6 LTCMaster

Part Number A6 LTCMaster

Hash Rate 1.23Gh/s (+-8%)

Power 1500W+/-8%

Size (L×W×H) (L)350mm*(W)250mm*(H)155mm (dual tube)

Net Weight 8.46KG (without PSU)

Operating Temperature 0-40 ℃

Required rated PSU 1800W or above, 17 * PCI-E 6Pin

Network Connection Ethernet

INNOSILICON CONFIDENTIAL

2. CABLE CONNECTION

2.1 CHECK THE MINER BEFORE POWER ON

·Check the warranty sticker is well or not, especially the hashboards PSU port side. If the warranty sticker

is damaged when you received the miner, please contact our After-sales.

·Before you power on the miner, shake the miner softly, if you can hear the sound of metal banging on

metal, please contact our After-sales.

·Check if the fan work well, if you find the fans broken please contact our After-sales.

·Check the cable connection, if it is different from below picture, please connect the cables as below.

INNOSILICON CONFIDENTIAL

A6 LTCMaster

INNOSILICON CONFIDENTIAL

2.2 CONNECT THE PSU

Every hash board needs to be inserted with 2 PSU cables, controller only needs 1 PSU cable according to

the following image .

2.3 CONNECT THE ETHERNET CABLE

Insert one end of the Ethernet cable into the router and the other end into the slot shown in the following

image, you should plug in the miner one by one, only when you have accomplished IP Setting of the

previous one you can plug in another miner .

IP SET button: Press it more than 5 seconds to recover the IP to 192.168.1.254.

RESET button: Your miner will restart if you press it. It wont recover your settings to the default.

INNOSILICON CONFIDENTIAL

A6 LTCMaster

INNOSILICON CONFIDENTIAL

3. ENTER THE MINER CONSOLE

By default, the miner uses Static IP to access the control webpage of the miner.

Input 192.168.1.254 into the browser, then click ‘Enter’ to enter the miner’s control webpage (Chrome is

the suggested browser).

Cant access the miner console?

Maybe it is because miner IP and the router IP have a different network segment, two ways to solve it:

·Modify the router IP to 192.168.1.1,then try again.

·Don’t want to change the network segment of the router? Do it as below:

Connect the miner and computer with a network cable. Open the windows system control panel, go to

Network and Internet — Network and share center – change the adapter settings, the mouse cursor to

the “Local Area Connection” click the right mouse button to view properties.

INNOSILICON CONFIDENTIAL

A6 LTCMaster

INNOSILICON CONFIDENTIAL

·Press the OK button twice to confirm the changes.Then modify the IP address of the miner (Do it as the

follow step 4.4) to guarantee the miner and the router have the same network segment.Then connect

the miner with the router,connect the PC with the router and select the “Obtain the IP address

automatically”.Now you can enter the IP through the browser into the control interface

INNOSILICON CONFIDENTIAL

A6 LTCMaster

INNOSILICON CONFIDENTIAL

·Press the OK button twice to confirm the changes.Then modify the IP address of the miner (Do it as the

follow step g) to guarantee the miner and the router have the same network segment.Then connect

the miner with the router,connect the PC with the router and select the “Obtain the IP address

automatically”.Now you can enter the IP through the browser into the control interface

4. CONFIG THE MINER

4.1 Enter ‘Miner Configuration’ page, select ‘General Settings’. Click the lower right corner to

enter log in page.

4.2 Enter the default password“12345678”, then click lower right corner to enter

configuration page.

INNOSILICON CONFIDENTIAL

A6 LTCMaster

INNOSILICON CONFIDENTIAL

Password is wrong/error?—Please contact our after-sales people.

4.3 Enter the mining pool’s URL, Worker, password according to the following image, then click

.The miner will start mining, and the page will return to the ‘Miner Configuration’ page. It will show

the user’s modified setting.

INNOSILICON CONFIDENTIAL

A6 LTCMaster

INNOSILICON CONFIDENTIAL

4.4 To avoid IP conflict when using 2 or more miners at the same time, the IP address needs to be

changed. Enter the network interface shown in the following image, and modify the IP address to you

need, then click the “Save” to save it.

Note：If you change the miner IP address to another network segment, after you save it there will be

3 circles keep spinning,that is ok.

> IP address: If the router address is 192.168.0.1，you can change the miner’s IP address to

192.168.0.#（# can be any number between 10-253 but every miner’s # must be unique）.

>Subnet mask: Keep it consistent with your computer.

>Gateway: Same with the router address.

>DNS: It is recommended to modify the DNS to the local network operator near the location of the

miner. For example, the mining machine uses telecommunication broadband in Beijing, China. Search

in Baidu or Google search engine "Beijing Telecom DNS" to get the DNS: 219.141.136.10. Then use

this DNS for your miner.

When the above information is input, click the lower right corner to save.

4.5 Enter ‘Miner Status’ page to check the status on the mining pool configuration and performance of the

miner.

INNOSILICON CONFIDENTIAL

A6 LTCMaster

INNOSILICON CONFIDENTIAL

Indice

Altri manuali INNOSILICON Hardware per computer

INNOSILICON

INNOSILICON S11-Sia Manuale utente

INNOSILICON

INNOSILICON A8+ CryptoMaster Manuale utente

INNOSILICON

INNOSILICON T2Ti-25T BTC Manuale utente

INNOSILICON

INNOSILICON A4+ LTCMaster Manuale utente

INNOSILICON

INNOSILICON D9-DCR Manuale utente

INNOSILICON

INNOSILICON T2-BTC Manuale utente

INNOSILICON

INNOSILICON T2T-25T BTC Manuale utente

INNOSILICON

INNOSILICON T2T-24T BTC Manuale utente

INNOSILICON

INNOSILICON A5 DashMaster Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente