INITIAL SET UP
Wire the unit per the installation instructions and connect
power to the battery sense terminals. The SET SYSTEM
VOLTAGE screen should be displayed on the front panel. Press
ENTER to select that screen, then use the scroll wheel to select
the NOMINAL BATT V line, press ENTER to select, and then
adjust the encoder knob to select 12, 24 or 48V as required.
Press ENTER to select. The unit disconnect and reconnect
thresholds will now be set to the factory default levels for that
battery voltage.
Normally this is the only setting required on the unit unless
custom disconnect or reconnect points are desired, or the
internal LVD contactor is to be manually set to open or closed.
The external battery service disconnect switch may now be
closed, allowing the load to be powered through the LVD unit.
ALARMS
The Form-C alarm contact on the back panel is triggered for LVD
trip, Over Current trip, or internal Over Temperature trip. The
main LVD contactor will open for all alarm conditions, and must
be manually re-set for an Over Current event by setting the LVD
Mode back to AUTO.
Alarm Screens: (any button press will return to home screen)
SPECIFICATIONS
Battery Voltage: 10 to 65V
Maximum Load Current: 200A (12/24V), 100A (48V)
Auto Overload Disconnect Current: (+/- 5%)
12/24V System setting 220A
48V System setting 110A
Display Accuracy (V): +/- 2%
(Amps): +/- 5%
LVD Delay (approx. time to switch state) 3s
Operating power (Tare loss): < 1W
Alarm Contact (Form-C): 0.5A, 125Vac/dc max
Dimensions: (inches)
LIMITED WARRANTY
The warranty period on ICT products is two (2) years from date of purchase from
an authorized ICT reseller or OEM with valid proof of purchase, or from date of
shipment from the ICT manufacturing facility. The warranty period for a repaired
product or part is ninety (90) days or the remainder of the unexpired term of the
new product warranty period, whichever is greater. Repair or replacement of a
defective product or part does not extend the original warranty coverage period.
ICT Limited Warranty is only intended for the benefit of the original purchaser and
user of this product. This Warranty is not transferable or assignable without the
prior written permission of ICT. ICT’s sole obligation and liability under this
warranty is limited to either repairing or replacing defective products at the sole
discretion of ICT. When repairing or replacing the products, ICT may use products
or parts that are new, equivalent to new or re-conditioned. Parts repaired or
replaced during the warranty period will be under warranty for the remainder of
the warranty period.
No claim will be accepted unless written notice of the claim is received by ICT in
accordance with ICT’s Return Material Authorization (RMA) procedure, as soon as
reasonably possible after the defect is discovered. A valid product serial number
must be provided with the RMA claim to prove eligibility. The RMA form is
available on the ICT website at www.ict-power.com/support/warranty-repair/.
The Purchaser shall at their own risk and cost return the defective product to ICT’s
factory or designated repair center once an RMA is issued by ICT. Return of the
products to the customer after repair is completed shall be prepaid by ICT unless
otherwise mutually agreed between the parties. Products shipped to ICT which
have incurred freight damage will not be covered by this Warranty and any repairs
or replacement parts, components or products needed will be invoiced in the full
current price amount and returned freight collect to Purchaser. It is the
Purchaser’s responsibility to check the product upon receipt for any damage
during shipping and to contact the carrier or shipper regarding such damage.
Product that is returned as defective, which is determined to operate within
published specifications will be returned to the Purchaser freight collect.
ICT assigns to Purchaser any warranties which are made by manufacturers and
suppliers of components of, or accessories for, the ICT product and which are
assignable. ICT makes no representations as to the effectiveness or extent of such
warranties, assumes no responsibility for any matters which may be warranted by
such manufacturers or suppliers and extends no additional coverage under this
Warranty to such components or accessories.
In no event shall ICT be liable for any special, indirect or consequential damages
such as, but not limited to, loss of use, business or goodwill, loss of revenue, or
loss of profits, which may result, either directly or indirectly, from defects in
products provided by ICT.
This Warranty will be void if the product has been subjected to misuse, neglect,
accident, exposure to environmental conditions not conforming to the products’
limits of operation, improper installation or maintenance, improper use of an
electrical source, defects caused by sharp items or by impact pressure, a force
majeure event, has been modified or repaired by anyone other than ICT or its
authorized representative, has been subjected to unreasonable physical, thermal
or electrical stress, improper maintenance, or causes external to the unit including
but not limited to general environmental conditions such as rust, corrosive
atmospheres, sustained temperatures outside the specified operating range of the
equipment, exposure to power surges and/or electrical surges, improper
grounding, mold or dust, animal or insect damage, water damage or immersion in
liquid of any kind, or if the serial number has been altered, defaced, or removed.
ICT does not control the installation and use of any ICT product. Accordingly, it is
understood this does not constitute a warranty of performance or a warranty of
fitness for a particular purpose. This Warranty represents the entire agreement
between ICT and Purchaser with respect to the subject matter herein and
supersedes all prior verbal or written communications, representations,
understandings or agreements relating to this subject.
INNOVATIVE CIRCUIT TECHNOLOGY LTD.
26921 Gloucester Way
Langley, British Columbia, Canada V4W 3Y3
T 604.856.6303 F604.856.6365 www.ict-power.com
ALARM
BATT LOW 10.5VDC
BATT DISCONN BY LVD
ICT200-LVD
LOW VOLTAGE DISCONNECT
INSTRUCTION MANUAL
INNOVATIVE CIRCUIT TECHNOLOGY LTD.
ALARM
OVER CURRENT
BATT DISCONN BY LVD
